SpeaKa Professional SP-WMM-200S

SpeaKa Professional SP-WMM-200S Monitor Wall Mount Instruction Manual

Model: SP-WMM-200S

1. Киришүү

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your SpeaKa Professional SP-WMM-200S Monitor Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This wall mount is designed for monitors and TVs ranging from 13 to 30 inches.

2. Продукциянын өзгөчөлүктөрү

  • Aluminum monitor/TV wall mount with multiple articulation points.
  • Supports displays from 13 inches (33 cm) to 30 inches (76.2 cm).
  • Graduated articulations prevent sudden movements, enhancing stability.
  • Lockable design with a rotary knob to secure the arm position.
  • Retractable wall plate for quick installation and removal.
  • Anti-slip knobs for quick tilt and locking adjustments.

3. Техникалык шарттар

СпецификацияДеталь
БрендSpeaKa адиси
Модель номериSP-WMM-200S (also SP-9493252)
Шайкеш экран өлчөмү13 - 30 дюйм (33 - 76.2 см)
МатериалАлюминий
Монтаж түрүДубалга орнотуу
Кыймыл түрүАйлануу, жантайтуу
ТүсVarious (typically black/dark grey)

4. Орнотуу жана орнотуу

Маанилүү коопсуздук эскертүүсү: Ensure the mounting surface can safely support the combined weight of the mount and your display. Professional installation is recommended if you are unsure about wall types or mounting procedures. Always use appropriate safety gear.

4.1. Пакеттин мазмуну

Verify that all components are present before beginning installation. Refer to the product packaging for a detailed list of included hardware.

4.2. Талап кылынган куралдар (камтылган эмес)

  • Бургулоо
  • Дубалдын түрүнө (жыгач, бетон, кирпич) ылайыктуу бургу учтары
  • Stud finder (for wood stud walls)
  • Деңгээл
  • Филлипс бурагыч
  • Карандаш
  • Өлчөө лентасы

4.3. Орнотуу кадамдары

  1. Дубалды даярдоо: Identify the desired mounting location. For wood stud walls, use a stud finder to locate the center of a stud. For concrete or brick walls, ensure there are no hidden pipes or electrical wires.
  2. Бургулоо пункттарын белгилөө: Hold the wall plate of the mount against the wall at the desired height and use a level to ensure it is straight. Mark the drilling points through the holes on the wall plate with a pencil.
  3. Бургулоо тешиктери: Drill pilot holes at the marked locations. The size of the drill bit will depend on the wall anchors provided with your mount. Insert wall anchors if required for your wall type.
  4. Дубал плитасын бекитүү: Secure the wall plate to the wall using the provided screws and a Phillips head screwdriver. Ensure it is firmly attached and level.
  5. Attach Monitor Plate to Display: Carefully place your monitor face down on a soft, clean surface. Attach the VESA plate (the part that connects to the monitor) to the back of your display using the appropriate screws from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
  6. Mount Display to Wall Plate: With assistance, carefully lift the display with the attached VESA plate and hook it onto the wall plate. The retractable design allows for easy engagement. Ensure the display is securely seated.
  7. Secure Display: Use the locking mechanism (e.g., screws or safety pins) to secure the display to the wall plate, preventing accidental dislodgement.
SpeaKa Professional SP-WMM-200S Monitor Wall Mount, front view

Сүрөт 1: Алдыңкы view of the SpeaKa Professional SP-WMM-200S Monitor Wall Mount, showing the VESA plate and wall attachment.

SpeaKa Professional SP-WMM-200S Monitor Wall Mount, angled view

2-сүрөт: Бурчтуу view of the SpeaKa Professional SP-WMM-200S Monitor Wall Mount, highlighting the articulation points.

5. Иштөө нускамалары

The SpeaKa Professional SP-WMM-200S wall mount offers flexible positioning for your display.

5.1. Adjusting Tilt

To adjust the vertical tilt angle of your display, loosen the anti-slip knob located on the tilt mechanism. Adjust the display to the desired angle, then tighten the knob firmly to secure it in place. The graduated articulations help maintain stability during adjustment.

SpeaKa Professional SP-WMM-200S Monitor Wall Mount, side view showing tilt mechanism

3-сүрөт: Каптал view of the mount, illustrating the tilt adjustment mechanism with its anti-slip knob.

5.2. Adjusting Swivel

To adjust the horizontal swivel angle of your display, gently rotate the display to the left or right. The mount's design allows for smooth pivoting. If the movement is too loose or too stiff, check the rotary knob on the arm and adjust its tension as needed. Tighten the rotary knob to lock the arm in the desired swivel position.

SpeaKa Professional SP-WMM-200S Monitor Wall Mount, front view of VESA plate

Сүрөт 4: Алдыңкы view of the VESA plate, which attaches to the monitor, showing the connection point to the articulating arm.

6. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө дубал монтажыңыздын узак жана коопсуз иштешин камсыздайт.

  • Тазалоо: Орноткучту жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз, анткени алар капталга зыян келтириши мүмкүн.
  • Байланыштарды текшерүү: Periodically check all screws and bolts to ensure they remain tight. Loose connections can lead to instability or damage.
  • эскирүү үчүн текшерүү: Examine the mount for any signs of wear, damage, or corrosion. If any issues are found, discontinue use and contact customer support.

7. Кыйынчылыктарды

If you encounter issues with your SpeaKa Professional SP-WMM-200S wall mount, refer to the following common problems and solutions:

  • Тоо бошоң же туруксуз сезилет:
    • Ensure all wall mounting screws are securely tightened.
    • Verify that the display is properly seated and locked onto the wall plate.
    • Check the tension of the articulation points and rotary knobs; tighten as necessary.
  • Дисплей бир калыпта эмес:
    • Loosen the VESA plate screws slightly, adjust the display to be level, then re-tighten.
    • Ensure the wall plate itself was installed level. If not, minor adjustments may be possible, or re-installation might be required.
  • Difficulty adjusting tilt or swivel:
    • Ensure the anti-slip knobs and rotary knobs are sufficiently loosened before attempting to adjust.
    • Do not force adjustments; if movement is stiff, check for obstructions or overtightened locking mechanisms.

8. Кепилдик жана колдоо

The SpeaKa Professional SP-WMM-200S Monitor Wall Mount typically comes with a 1-year warranty for parts availability. Please refer to your purchase documentation for specific warranty terms and conditions.

For technical support, missing parts, or warranty claims, please contact your retailer or the SpeaKa Professional customer service department. Keep your proof of purchase handy when contacting support.

© 2023 SpeaKa Professional. Бардык укуктар корголгон.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.