NETVIP US-WN519-LS

NETVIP N300 WiFi Extender Signal Booster User Manual

Model: US-WN519-LS

1. Киришүү

The NETVIP N300 WiFi Extender is designed to expand the coverage of your existing wireless network, eliminating areas with weak signal and providing a stable 2.4GHz WiFi signal. This manual provides detailed instructions for setup, operation, and troubleshooting to ensure proper use of your device.

2. Продукт бүтүп калдыview

Familiarize yourself with the physical components and indicators of your NETVIP N300 WiFi Extender.

NETVIP N300 WiFi Extender Detail Display showing ports and LED indicators

Сүрөт 2.1: Деталь view of the NETVIP N300 WiFi Extender, highlighting the LAN Port, Reset button, WPS button, Power LED, Wireless LED, WPS LED, and LAN LED. The device features a US plug for direct wall outlet connection.

  • Power LED: Кубаттын абалын көрсөтөт.
  • Зымсыз LED: Зымсыз байланыштын активдүүлүгүн көрсөтөт.
  • WPS LED: WPS функциясынын абалын көрсөтөт.
  • LAN LED: Ethernet портунун активдүүлүгүн көрсөтөт.
  • LAN порту: Зымдуу туташуулар үчүн.
  • Калыбына келтирүү баскычы: Заводдук жөндөөлөрдү калыбына келтирүү үчүн колдонулат.
  • WPS баскычы: For quick, secure connection setup.

3. Setup Instructions (Repeater Mode)

Follow these steps to configure your WiFi Extender in Repeater Mode, which extends the range of your current WiFi network.

  1. Күйгүзүү: Plug the repeater into a power socket. Wait until the green WPS light begins blinking.
  2. Репитер менен туташыңыз: On your phone, tablet, or laptop, connect to the WiFi signal named "Wireless-N-c". This is the extender's temporary network, not your home's existing WiFi.
  3. Орнотуу барагына кирүү: The device should automatically redirect you to the settings page. If not, open a web браузерде жана кол менен киргизүү 192.168.10.1 дарек тилкесинде.
  4. Кирүү: Enter "admin" for both the username and password.
  5. Кайталоочу режимин тандаңыз: Click on "Repeater" under the Wizard section.
  6. Choose Network: Select your existing home WiFi network from the list and click "Apply".
  7. Configure Repeater SSID: Set a new name (SSID) for your extended network, or keep the default name. Enter your home WiFi password as the Security Key for this new Repeater network. Click "Apply".
  8. Аяктоо: Wait for the settings to be applied. Close the page and reconnect your devices to the newly created extended network.

Маанилүү эскертүү: When setting up in Repeater Mode, the password for the extended network must be exactly the same as your home WiFi password for internet access.

NETVIP N300 WiFi Extender plugged into a wall outlet, showing signal indicators

Сүрөт 3.1: The NETVIP N300 WiFi Extender plugged into a wall socket, ready for setup.

4. Иштөө режимдери

The NETVIP N300 WiFi Extender supports two primary operating modes: Repeater Mode and Access Point (AP) Mode.

Diagram illustrating Repeater Mode and AP Mode for the WiFi Extender

Сүрөт 4.1: Diagram showing the two working modes: Repeater Mode (extending a router's signal) and AP Mode (creating a new WiFi hotspot from a modem).

  • Кайталоо режими: This mode extends the coverage of your existing 2.4GHz Wi-Fi network, boosting the signal to areas with weak or no coverage. It connects wirelessly to your main router.
  • AP режими (кирүү чекити режими): In this mode, the extender creates a new WiFi hotspot. You connect the extender to your modem or router via an Ethernet cable, and it broadcasts a new wireless network. This is useful for converting a wired network into a wireless one.

5. Техникалык шарттар

ӨзгөчөлүкДеталь
Frequency Band2.4 ГГц
Колдоого алынган томtage110V-240V
WLAN коопсуздугуWPA2, WPA, WEP (128/64-бит)
АнтенналарИнтеграцияланган
Зымсыз стандарт802.11bgn
Маалыматтарды өткөрүү ылдамдыгы300 Мбит/сек чейин
Продукциянын өлчөмдөрү4.33 x 2.36 x 3.15 дюйм
Элемент Салмагы5.6 унция

6. Кыйынчылыктарды

If you encounter issues with your WiFi Extender, the following information may assist in resolving common problems.

Түзмөктү кантип баштапкы абалга келтирүү керек:

If you forget your password, need to change settings, or experience setup failures, a factory reset can resolve many issues.

  • табыңыз Калыбына келтирүү баскычы on the device (refer to Image 2.1).
  • Using a paperclip or similar pointed object, press and hold the Reset button for more than 20 seconds.
  • Continue holding until you observe the green light turning off and then turning on again. This indicates the device has reset to its factory default settings.
  • After resetting, you will need to reconfigure the extender following the setup instructions.

7. Пакеттин мазмуну

The following items are included with your NETVIP N300 WiFi Extender:

NETVIP N300 WiFi Extender package contents including repeater, manual, and Ethernet cable

Сүрөт 7.1: The NETVIP N300 WiFi Extender package contents, showing the WiFi Repeater, User Manual, and RJ45 Ethernet Cable.

  • 1x WiFi Repeater (NETVIP N300 WiFi Extender)
  • 1x RJ-45 Ethernet кабели
  • 1x User Manual (available in 5 languages)

8. Кепилдик жана колдоо

The NETVIP N300 WiFi Extender includes a 1-year warranty. For technical assistance or inquiries, please contact NETVIP customer support via email. They are committed to providing a satisfactory solution.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.