AOSHIDA U18

AOSHIDA Gustard U18 USB Digital Interface Instruction Manual

Model: U18 | Brand: AOSHIDA

Introduction

The Gustard U18 is a high-performance USB Digital Interface designed to enhance your audio system. It functions as a ground isolation USB bridge and a hi-end audio interface, supporting high-resolution audio formats such as DSD512 and PCM768K. Featuring advanced components like the XMOS XU216 processor, K2 clock synthesizer, and AS338 audio oscillators, the U18 provides multiple output interfaces including IIS, AES, Optical, Coaxial, and Clock outputs for versatile connectivity with various audio devices.

Коопсуздук эскертүүлөрү

  • Install this unit in a well-ventilated, cool, dry, clean place, away from direct sunlight, heat sources, vibration, dust, moisture, or cold.
  • Белгиленген томду гана колдонуңузtage for this unit. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, or personal injury. The manufacturer is not responsible for any damage resulting from the use of this unit with an incorrect voltage.
  • Do not attempt to modify or repair this unit yourself. Contact the salesperson or customer service when any service is needed. The cabinet should never be opened for any reason.
  • When not planning to use this unit for long periods (e.g., during vacation), disconnect the power cable from the AC wall outlet.

Өзгөчөлүктөрү

  • XMOS XU216 Processor: Equipped with 16 cores for rich resources and a smooth audio experience, supporting DSD512 and PCM768K.
  • Independent CPLD for Signal Shaping: The isolated IIS signal is reshaped to remove jitter introduced by the isolator.
  • Complete Grounding Isolation: Achieved by a 200 Mbps isolator to eliminate all interference from your PC.
  • 2nd Generation K2 Clock Synthesizer: Features ultra-low noise and supports external OCXO. K2 can generate audio-specific frequencies using a 10MHz clock source with extremely low loss.
  • Accusilicon AS338 Hi-End Audio Oscillators: Two AS338 oscillators ensure strict requirements, packaged with nitrogen gas and 100% checked by phase noise analyzer. Jitter is as low as 38fs, improving bass quality and harmony.
  • LT3045 Linear Regulator: The clock power supply is based on LT3045, a high-performance low dropout linear regulator with an RMS Noise of only 0.8µVRMS (10Hz to 100KHz).
  • Configurable IIS Pinout: Offers 4 modes for compatibility with various DACs.
  • Rich Interfaces: Includes USB, IIS-H, AES, Coaxial, Optical, and Clock inputs/outputs.

Пакеттин мазмуну

Upon unboxing your Gustard U18, please verify that all the following items are included:

  • Gustard U18 USB Digital Interface Unit
  • USB кабели
  • AC кубат кабели
  • User Manual
  • Кепилдик картасы

Видео: Unboxing the Gustard U18 USB Digital Interface. This video demonstrates the contents of the package and the initial unboxing experience.

Gustard U18 Unboxing Contents

Сүрөт: A visual representation of the Gustard U18 unit and its included accessories, such as cables and documentation.

Продукт бүттүview

Front Panel

Gustard U18 Front Panel

Сүрөт: Фронт view of the Gustard U18, showing the display screen, REF button, and IIS button.

  • Дисплей экраны: Учурдагы абалын жана жөндөөлөрүн көрсөтөт.
  • REF Button: Used for input selection or other reference functions.
  • IIS Button: Used for IIS pinout configuration or DSD flag settings.

Арткы панель

Gustard U18 Rear Panel

Сүрөт: Арткы view of the Gustard U18, highlighting all input and output ports.

  • Оптикалык чыгаруу: Digital audio output via optical fiber.
  • AES чыгаруу: Professional digital audio output via XLR connector.
  • COAX Output: Digital audio output via coaxial cable.
  • IIS Output: Digital audio output via HDMI connector (not standard HDMI video).
  • WCK Output: Word Clock output.
  • 10M CLK Input: Input for external 10MHz clock.
  • USB киргизүү: USB Type-B female connector for connecting to a computer or other USB audio source.
  • Тtage Switching (110/220V): Switch to select appropriate input voltage.
  • Кубат киргизүү: AC power connector.
  • Кубат которгучу: Негизги күйгүзүү/өчүрүү баскычы.
  • FUSE: Электр кубатын коргоо үчүн сактагыч кармагыч.

Жайгашуу

Follow these steps to set up your Gustard U18:

  1. Кубат туташуу: Voltage switch on the rear panel is set to the correct local voltage (110V or 220V). Connect the supplied AC power cable to the unit's power input and then to a wall outlet.
  2. USB Source Connection: Connect your audio source (e.g., PC, Android device, iOS device, PS5, Nintendo Switch) to the USB киргизүү on the rear panel using the provided USB cable.
  3. Аудио чыгаруу байланышы: Connect the Gustard U18 to your DAC or amplifier using one of the available digital outputs: IIS чыгаруу (via HDMI cable, ensure your DAC supports IIS over HDMI), AES чыгаруу, COAX чыгаруу, же Оптикалык чыгаруу. Choose the output that best suits your receiving device.
  4. External Clock (Optional): If you are using an external 10MHz clock, connect it to the 10M CLK Input.
  5. Күйгүзүү: Flip the Power Switch on the rear panel to the 'ON' position. The front display screen will illuminate.
  6. Driver Installation (for PC): For Windows operating systems, you may need to install specific drivers. Refer to the official Gustard website for the latest drivers. macOS and Linux typically do not require additional drivers.

Иштөө нускамалары

The Gustard U18 features intuitive controls for seamless operation:

  • Киргизүүнү тандоо: басыңыз REF баскычы on the front panel to cycle through the available digital inputs (USB, Optical, Coaxial, 10M CLK). The selected input will be indicated on the display screen.
  • IIS Pinout Configuration: The IIS output has 4 configurable modes. Press the IIS Button to change the pinout mode. The current mode will be displayed. Please confirm your DAC's pinout before changing this option. Only these 4 modes are supported.
  • DSD Flag Setting: көпкө басыңыз IIS Button to change the DSD Flag setting. This is important for proper DSD signal recognition by your DAC.
  • Маалыматты көрсөтүү: The front display screen provides real-time information about the active input, sampling rate, and DSD status.

Техникалык шарттар

КиргизүүOptical / Coaxial / USB
Чыгуу деңгээли2Vrms
THD+N0.00009% (-105дБ)
Динамикалык диапазон125дБ
SNR125дБ
USB спецификацияларыUAC1/UAC2 (selectable by switch)
USB шайкештигиWindows 7/8/8.1/10/11 (needs drivers), Mac OSX0.6+, Linux (Driverless), Android, iOS, SONY PS5 (UAC1), Nintendo SWITCH (UAC1)
USB PCM Sampling Rate44.1-768kHz (32bit)
USB DSD Sampling Rate2.8224-22.5792MHz (1bit), DoP256
Optical/Coaxial PCM Sampling Rate44.1-192kHz (24bit)
Optical/Coaxial DoPDoP64
Энергияны керектөө<5 Вт
Күтүү режими<0.1 Вт
Өлчөмдөрү (WxHxD)220 x 170 x 50mm (excluding protrusions)
Салмагы (пакет менен)2.5кг

Проблемаларды чечүү

If you encounter issues with your Gustard U18, please refer to the following common troubleshooting steps:

  • Кубат жок: Ensure the AC power cable is securely connected to both the unit and the wall outlet. Check the power switch position and the fuse. Verify the voltage switch is set correctly.
  • Үн чыгышы жок:
    • Verify the correct input is selected on the U18 using the REF button.
    • Check all audio cables (USB, IIS, AES, Coaxial, Optical) for secure connections.
    • Ensure your DAC/amplifier is powered on and the correct input is selected on that device.
    • If using IIS output, confirm the IIS pinout mode on the U18 matches your DAC's requirements.
    • For PC connections, ensure the correct audio driver is installed and selected as the output device in your operating system's sound settings.
  • Intermittent Audio/Signal Drops:
    • Check USB cable quality and connection. Try a different USB port or cable.
    • Ensure your computer's USB port is providing stable power.
    • Minimize other USB devices connected to the same hub or computer.
    • If using an external clock, ensure it is stable and properly connected.
  • Бурмаланган үн:
    • Экенин текшериңизampling rate and bit depth settings on your source device match the capabilities of the U18 and your DAC.
    • Кабелдик туташуулардын бошоп калганын текшериңиз.

If the problem persists after trying these steps, please contact AOSHIDA customer support for further assistance.

Техникалык тейлөө

To ensure the longevity and optimal performance of your Gustard U18, follow these maintenance guidelines:

  • Тазалоо: Түзмөктүн сыртын жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалоочу каражаттарды, эриткичтерди же химиялык чачыраткычтарды колдонуудан алыс болуңуз, анткени алар сырткы көрүнүшүнө зыян келтириши мүмкүн.
  • Вентиляция: Ensure the unit has adequate ventilation. Do not block the ventilation holes or place the unit in an enclosed space that restricts airflow.
  • Сактагыч: When not in use for extended periods, store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Disconnect the power cable.
  • Кабелдик байланыштар: Кабелдик туташуулар коопсуз жана бузулбашы үчүн мезгил-мезгили менен текшерип туруңуз.

Кепилдик жана колдоо

AOSHIDA provides comprehensive support for its products, including the Gustard U18 USB Digital Interface.

  • Кепилдик мөөнөтү: The product comes with a one-year free repair period, which may be extended depending on the specific brand and product. Please refer to your warranty card for detailed terms and conditions.
  • Кайтаруу саясаты: A 30-day return policy is offered.
  • Кардарларды тейлөө: 24-hour online service is available for any questions or assistance you may need.
  • Байланыш маалыматы: For consulting and after-sales service, please contact our after-sales team via email at service@aoshida-audio.com.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.