BONTEC Swivel TV Stand (Model ST14) Instruction Manual

1. Киришүү

This manual provides detailed instructions for the assembly, operation, and maintenance of your BONTEC Swivel TV Stand, Model ST14. Please read this manual thoroughly before installation and retain it for future reference. This stand is designed to securely hold most LED, OLED, LCD, and Plasma flat or curved televisions ranging from 42 to 86 inches, with a maximum weight capacity of 50 kg (110 lbs).

The stand features a robust cold-rolled steel construction, a stable 10mm tempered glass base, and offers height adjustment and a 25-degree swivel function for optimal viewing angles. Integrated cable management helps maintain a tidy appearance.

Сүрөт 1.1: Алдыңкы view of the BONTEC Swivel TV Stand (Model ST14).

Image 1.2: Illustrates the benefit of using the BONTEC TV stand compared to standard TV feet, offering better positioning and stability.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Бардык нускамаларды окубоо жана аткарбоо жеке жаракат же мүлккө зыян алып келиши мүмкүн.

• Монтаждоодон мурун бардык компоненттер бар экенин жана бузулбаганын текшериңиз. Эгерде кандайдыр бир бөлүктөрү жок же бузулган болсо, колдонбоңуз.
• This stand is designed for televisions between 42 and 86 inches and weighing up to 50 kg (110 lbs). Do not exceed the maximum weight capacity.
• Verify your TV's VESA mounting pattern is compatible with the stand (200x200mm to 800x600mm).
• Стендди чийип кетпеш үчүн жумшак, таза бетке чогултуңуз.
• Always use two people to lift and position the television onto the stand.
• Чогултуу учурунда балдарды жана үй жаныбарларын алыс кармаңыз.
• Бурамаларды өтө катуу тартпаңыз, анткени бул зыян келтириши мүмкүн.
• Стенд туруктуу, тегиз жерге коюлганын текшериңиз.

3. Пакеттин мазмуну

Please check that all parts are included in your package. While specific part numbers are not listed here, the package typically includes:

• Негизги колдоо мамыча
• Чыңдалган айнек негизи
• Телевизорду орнотуучу пластина
• Two TV mounting arms (hooks)
• Various screws, washers, and spacers for TV attachment (labeled A-Z or similar)
• Assembly hardware for the stand components
• Кабелдик башкаруу клиптери
• Non-slip rubber feet for the base
• Safety rope (anti-tip strap)
• Assembly tools (e.g., Allen key, wrench)
• Колдонмо

Image 3.1: Key features including security locks, non-slip feet, cable management clips, and safety rope.

4. Монтаждоо боюнча нускамалар

Assembly typically takes less than 15 minutes. Follow the step-by-step diagrams provided in your package. The general steps are:

1. Attach the Support Column to the Base: Secure the main support column to the tempered glass base using the provided screws and tools. Ensure it is firmly attached.
2. Install the TV Mounting Plate: Attach the TV mounting plate to the support column at your desired initial height. The plate offers 3 levels of height adjustment, with each level providing a 65mm change.
3. Attach Mounting Arms to TV: Identify the correct screws, washers, and spacers for your TV's VESA pattern. Attach the two TV mounting arms to the back of your television. Ensure the arms are level and securely fastened. The arms also have 2 height adjustment levels (50mm each) for fine-tuning.
4. Телевизорду стендге орнотуу: With assistance, carefully lift the television and hook the mounting arms onto the TV mounting plate. Engage the security locks to prevent accidental dislodgement.
5. Кабелдик башкаруу: Route your TV cables through the integrated cable management clips on the support column for a neat setup.
6. Install Safety Rope: For added stability and anti-tip protection, attach the safety rope from the stand to a wall stud or furniture.

Image 4.1: VESA compatibility patterns (200x200mm to 800x600mm) and supported screen sizes (42-86 inches).

Image 4.2: Height adjustment options, showing minimum (640mm) and maximum (770mm) heights, and adjustments for both the TV plate (3 levels, 65mm each) and the hook arms (2 levels, 50mm each).

5. Иштөө нускамалары

5.1. Бийиктигин тууралоо

The BONTEC TV Stand offers multiple height adjustment options to achieve your preferred viewing level:

• TV Plate Adjustment: The main TV mounting plate can be set at 3 different height levels on the support column. Each adjustment changes the height by 65mm. To adjust, you will need to unmount the TV, reposition the plate, and re-mount the TV.
• Mounting Arm Adjustment: The TV mounting arms themselves have 2 additional height settings, allowing for a 50mm adjustment. This can be done while the arms are attached to the TV, but the TV must be unmounted from the stand to access these settings.

5.2. Айлануу функциясы

The TV mounting plate allows the attached television to swivel up to 25 degrees to the left and 25 degrees to the right. This feature enables you to adjust the viewing angle without moving the entire stand. Simply grasp the sides of your television and gently rotate it to the desired angle.

Image 5.1: Illustration of the TV stand's 25-degree swivel capability for optimal viewing.

6. Техникалык тейлөө

• Тазалоо: Стендди тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Чыңалган айнек негизи үчүн айнек тазалагычты колдонсо болот. Финишке зыян келтирүүчү абразивдүү тазалагычтардан же эриткичтерден качыңыз.
• Текшерүү: Мезгил-мезгили менен бардык бурамалар менен байланыштарды текшерип туруңуз, алар бекем жана бекем бойдон калууда. Керек болсо кайра тартыңыз.
• Салмак чеги: Do not place items exceeding the stand's weight capacity on the base or attempt to mount a TV heavier than 50 kg.

7. Кыйынчылыктарды

7.1. TV is not level

• Check that the TV mounting arms are installed at the same height on the back of your TV.
• Ensure the TV mounting plate is securely fastened to the support column and is not tilted.
• Verify the stand is placed on a perfectly level surface.

7.2. Stand feels unstable

• Confirm all assembly screws are tightened properly.
• Ensure the tempered glass base is fully seated and secured to the support column.
• Verify the TV weight does not exceed 50 kg and is within the recommended screen size range.
• Make sure the stand is on a flat, stable surface.
• Utilize the provided safety rope to secure the stand to a wall or furniture.

7.3. Cables are messy

• Use the integrated cable management clips on the rear of the support column to organize and conceal cables.

8. Техникалык шарттар

Image 8.1: Illustration of the stand's maximum load capacity of 50 kg.

Image 8.2: Dimensions of the polished 10mm tempered glass base (600mm x 400mm).

9. Кепилдик жана колдоо

Information regarding specific warranty terms and customer support contacts is not available in the provided product data. Please refer to the product packaging or the manufacturer's official website for warranty details and support contact information.