LEDONE Remote Control User Manual

1. Киришүү

This manual provides comprehensive instructions for the LEDONE Remote Control, designed for use with Motion Detection, UFO High Bay, Parking Lot Light, and Linear High Bay Lights (specifically HD406VRH Sensor compatible). This remote enhances convenience and control over your lighting systems, allowing for customization of various settings to optimize performance and energy efficiency in commercial spaces.

2. Продукциянын өзгөчөлүктөрү

• Direct control over LED high bay light processes.
• Four pre-programmed fixed scene modes for automatic settings.
• Controls UFO High Bay lights and integrated motion detection sensors.
• Customizable brightness and motion sensor settings.
• Includes essential functions: On/Off, Auto mode, and Reset for straightforward operation.

3. Орнотуу

3.1 Батареяны орнотуу

The LEDONE Remote Control requires 'A' type batteries (not included). To install:

1. Пульттун артындагы батарея бөлүкчөсүнүн капкагын табыңыз.
2. Капкакты жебе көрсөткөн тарапка жылдырыңыз.
3. Insert the 'A' batteries, ensuring correct polarity (+ and -) as marked inside the compartment.
4. Батарея бөлүкчөсүнүн капкагын бекем чыккыча ордуна коюңуз.

3.2 Баштапкы туташуу

The remote control is designed to work seamlessly with compatible LEDONE UFO High Bay and Linear High Bay Lights equipped with HD406VRH sensors. No complex pairing is typically required; the remote should function upon battery installation and being within range of the compatible light fixture.

4. Иштөө нускамалары

Алыстан башкаруунун схемасы менен таанышыңыз:

Figure 1: LEDONE Remote Control Layout

4.1 Негизги функциялар

• КҮЙГҮЗҮҮ/ӨЧҮРҮҮ: Press to toggle the connected light fixture on or off.
• Авто режим: Activates the automatic operation mode, utilizing the sensor's default or previously set parameters.
• Кайтаруу: Resets all settings on the connected light fixture to their factory default values.
• Жарыктык (+/-): Adjusts the light output intensity.

4.2 Өркүндөтүлгөн жөндөөлөр

The remote allows for precise customization of sensor and lighting parameters:

• Баштоо: Initiates the application of selected settings.
• Эстутум: Saves the current custom settings for quick recall.
• Колдонуу: Applies the settings stored in memory or the currently selected custom settings.

Тактоо диапазону

Select the desired motion detection sensitivity:

• 25%, 50%, 75%, 100%: Choose the percentage of the sensor's maximum detection range.

Убакыт кармап туруу

Sets the duration the light remains at full brightness after motion is detected and before dimming or turning off:

• 5s, 30s, 1min, 3min, 5min, 10min, 15min, 30min: Select the hold time in seconds or minutes.

Күтүү режиминдеги күңүрттүрүү деңгээли

Determines the light output level during the stand-by period (after hold time and before turning off):

• 10%, 20%, 30%, 50%: Set the dimming percentage.

Күтүү мезгили

Sets the duration the light remains at the stand-by dimming level before turning off completely:

• 0s, 10s, 30s, 1min, 5min, 10min, 30min, +∞: Select the stand-by period. '+∞' indicates the light will remain at the stand-by dimming level indefinitely.

Күндүн жарык сенсору

Configures the ambient light threshold at which the motion sensor will activate the light:

• 2Lux, 10Lux, 30Lux, 50Lux, 80Lux, 120Lux: Light will only turn on if ambient light is below the selected Lux level.
• Өчүрүү: The daylight sensor is deactivated, and the light will respond to motion regardless of ambient light.

Сыноо (2сек.)

Activates a 2-second test mode to verify sensor functionality and current settings.

5. Техникалык тейлөө

To ensure optimal performance and longevity of your LEDONE Remote Control:

• Тазалоо: Пультту жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Батареяны алмаштыруу: Replace batteries when the remote's response becomes sluggish or inconsistent. Always use new 'A' type batteries.
• Сактагыч: Пультту күн нурунан жана экстремалдык температурадан алыс, салкын, кургак жерде сактаңыз.
• Нымдуулуктан качыңыз: Do not expose the remote to water or high humidity.

6. Кыйынчылыктарды

If you encounter issues with your LEDONE Remote Control, refer to the following common problems and solutions:

• Пульт жооп бербей жатат:
  • Батареянын орнотулушун текшерип, керек болсо батарейкаларды алмаштырыңыз.
  • Ensure there are no obstructions between the remote and the light fixture's sensor.
  • Verify that the light fixture is powered on and functioning correctly.
• Settings not applying:
  • Ensure you are pressing the 'Apply' or 'Start' button after making changes.
  • Confirm the remote is within effective range of the light fixture.
  • Try resetting the light fixture using the 'Reset' button on the remote, then re-apply settings.
• Чектелген диапазон:
  • Батареяларды жаңысына алмаштырыңыз.
  • Жакын жерде күчтүү тоскоолдук булактарынын (мисалы, башка зымсыз түзмөктөрдүн) жоктугун текшериңиз.

7. Техникалык шарттар

8. Кепилдик жана колдоо

LEDONE is committed to providing quality lighting solutions and customer satisfaction. Our products are designed for optimal performance and safety. For any inquiries, technical assistance, or warranty information, please contact LEDONE customer service. LEDONE is based in California, offering worry-free services for our products.