YLL yllih2.0

YLL IH 2.0 Induction Heater User Manual

Model: yllih2.0 | Brand: YLL

Introduction

The YLLVAPE YLL-IH 2.0 is a portable, torchless induction heater designed to enhance your DynaVap experience. It offers adjustable wattage, a boost mode, and a customizable timer for precise heating.

Маанилүү коопсуздук маалыматы

  • Колдонуудан мурун бардык нускамаларды окуп чыгыңыз.
  • Балдар жана үй жаныбарлары жетпеген жерде сактаңыз.
  • Сууга же өтө жогорку температурага дуушар кылбаңыз.
  • Use only compatible 18650 batteries with a discharge current of 10A or more.
  • Аппаратты ажыратпаңыз же өзгөртпөңүз.
  • Аппаратты колдонбогондо же тазалоо учурунда электр розеткасынан сууруп алыңыз.

Пакеттин мазмуну

  • YLL-IH 2.0 Induction Heater
  • USB-C заряддоо кабели
  • Insert Driver Tool
  • 11.5mm Insert (Note: 8.5mm insert is not included)

Note: 18650 batteries are not included and must be purchased separately.

Орнотуу колдонмосу

1. Батареяны орнотуу

The YLL IH 2.0 requires two 18650 high-rate batteries (10A or more discharge current) for operation. Batteries are not included.

  1. Аппараттагы батарея бөлүкчөсүн табыңыз.
  2. Батарея уясынын капкагын ачыңыз.Арткы view of YLL IH 2.0 showing open battery compartment with two green 18650 batteries inserted.

    Сүрөт: Арткы view of the YLL IH 2.0 with the battery compartment open, showing two green 18650 batteries correctly inserted. This illustrates how to access and load the batteries.

  3. Insert two 18650 batteries according to the polarity indicators inside the compartment.
  4. Батарея уясынын капкагын бекем жабыңыз.

2. Баштапкы төлөм

Before first use, fully charge the device using the provided USB-C cable. Connect the cable to the USB-C port on the device and a suitable power source.

Иштөө нускамалары

1. Күйгүзүү / Өчүрүү

To power on the device, press the power button five times rapidly. To power off, repeat the same action.

2. Basic Heating

Insert your DynaVap tip into the heating chamber. The device will automatically begin heating when the tip is inserted. Remove the tip once you hear the "click" indicating it has reached the desired temperature.YLL IH 2.0 Induction Heater with a DynaVap device inserted into the heating chamber, placed outdoors on a rock.

Image: The YLL IH 2.0 Induction Heater with a DynaVap device inserted into its heating chamber, demonstrating typical use. The device is shown outdoors on a rock, highlighting its portability.

Жакын план view of the YLL IH 2.0 heating chamber opening, showing the metallic induction coil inside.

Сүрөт: жакын план view of the heating chamber opening on the YLL IH 2.0, providing a clear look at the internal induction coil where the DynaVap tip is inserted.

3. Adjustable Wattage (30W-60W)

The YLL IH 2.0 allows you to adjust the wattage for different heating preferences, ranging from 30W to 60W (30W, 35W, 40W, 45W, 50W, 55W, 60W). This feature enables you to control vapor production, whether you prefer large clouds or a gentler heat-up.

Refer to the device's display and controls to cycle through wattage орнотуулар.Фронт view of the YLL IH 2.0 Induction Heater displaying '50W' and '60' on its screen, indicating wattage and possibly a timer setting.

Сүрөт: алдыңкы view of the YLL IH 2.0 Induction Heater, showcasing its digital display. The screen shows "50W" and "60", illustrating the adjustable wattage feature and potentially a timer setting.

4. Adjustable Heating Profile

Fine-tune your heating profile by adjusting the base of the coil using the included insert driver tool. This tool is located conveniently near the battery chamber. Adjusting the coil's position can alter the heat distribution and overall vaping experience.

5. Boost Mode

Activate Boost Mode to experience the full power of the YLL-IH, running at the maximum wattage supported by the batteries. This mode ensures rapid heating, quick clicks, and performance similar to a torch.

6. Таймер функциясы

The device features an adjustable timer from 16 to 60 seconds. To adjust the timer:

  1. Кубат баскычын эки жолу чыкылдатыңыз.
  2. Select your desired time setting (16-60 seconds).
  3. Double-click the power button again to confirm your selection.

Техникалык тейлөө жана кам көрүү

  • Аппаратты таза жана таштандылардан тазалаңыз.
  • Сыртын жумшак, кургак чүпүрөк менен сүртүңүз.
  • Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонбоңуз.
  • Ensure the heating chamber is clear of any residue.
  • Аппаратты колдонбогондо салкын, кургак жерде сактаңыз.

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Түзмөк күйбөй жататБатареянын заряды аз же батарея туура эмес орнотулган.Charge batteries or re-install them correctly. Ensure batteries are high-rate (10A+).
No heat or weak heatingDynaVap tip not fully inserted, low wattage setting, or coil adjustment needed.Ensure tip is fully inserted. Increase wattage. Adjust heating coil with the insert driver.
Аппараттын ысып кетишиProlonged use without cooling, or internal issue.Allow device to cool down. If problem persists, contact support.

Техникалык шарттар

  • Модел: yllih2.0
  • Бренд: YLL
  • Жөнгө салынуучу Wattage: 30W, 35W, 40W, 45W, 50W, 55W, 60W
  • Таймер диапазону: 16 - 60 секунд
  • Батарея шайкештиги: 2 x 18650 high-rate batteries (10A+ discharge current, not included)
  • Заряддоо порту: USB-C
  • Түсү: Кара
  • Пакеттин өлчөмдөрү: 14.5 x 9.2 x 5.4 см
  • Салмагы: 340 г

Кепилдик жана колдоо

Кепилдик маалыматы жана кардарларды колдоо үчүн, өндүрүүчүнүн расмий өкүлүнө кайрылыңыз webсайтка же сатуучуга кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.

Өндүрүүчү: YLL VAPE