SUGON A9 245 Soldering Station User Manual

1. Киришүү

The SUGON A9 245 Soldering Station is a high-performance, 120W soldering iron station designed for precision soldering and repair tasks. It features rapid heating capabilities, precise PID temperature control, and a user-friendly interface with an LCD screen. This manual provides detailed instructions for the safe and effective use, maintenance, and troubleshooting of your soldering station.

Figure 1.1: SUGON A9 245 Soldering Station with included accessories.

2. Коопсуздук маалыматы

Сураныч, бул продуктуну колдонуудан мурун бардык коопсуздук эскертүүлөрүн жана нускамаларын кылдат окуп чыгыңыз. Бул нускамаларды аткарбоо электр шокуна, өрткө же олуттуу жаракатка алып келиши мүмкүн.

• Көздү коргоо: Always wear safety glasses or goggles when soldering to protect your eyes from solder splashes and fumes.
• Вентиляция: Use the soldering station in a well-ventilated area or with a fume extractor to avoid inhaling harmful solder fumes.
• Ысык беттер: The soldering iron tip and surrounding metal parts become extremely hot during operation. Avoid direct contact with hot surfaces. Allow the iron to cool completely before handling or storing.
• Электр коопсуздугу: Ensure the power cord is in good condition and properly connected to a grounded outlet. Do not operate the station with wet hands or in damp шарттар.
• Күйүүчү материалдар: Keep flammable liquids, gases, and materials away from the soldering area.
• Туура колдонуу: Use the soldering station only for its intended purpose. Do not modify the unit or use non-original parts.
• Балдар жана үй жаныбарлары: Keep the soldering station out of reach of children and pets.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• 1 x SUGON A9 245 Soldering Station
• 1 x Soldering Handle (245 type)
• 3 x C245 One-piece Soldering Iron Tips (I type, IS type, K type)
• 1 x Copper Wire Cleaning Ball
• 1 x High Temperature Cleaning Sponge
• 1 х Кубат кабели
• 1 x Power Cord Retaining Rod
• 1 x Instruction Manual
• 1 x Warranty Card (12 Months)

4. Продукциянын өзгөчөлүктөрү

The SUGON A9 245 Soldering Station is equipped with advanced features for efficient and precise soldering:

• Тез жылытуу: The 120W power output allows the station to heat up from standby to 716°F (380°C) in approximately 3 seconds. This rapid heating is controlled by PID temperature technology for stable and accurate temperature maintenance.


Figure 4.1: Rapid heating capability of the soldering station.

Video 4.1: Demonstration of the soldering station's fast temperature rise to 716°F.
• Wide Voltage Шайкештик: The station supports universal voltage input (110V and 220V), making it suitable for use in various regions without requiring a voltage конвертер.
• One-Piece Soldering Iron Tips: Utilizes C245 type integrated heating element soldering iron tips, which offer improved heating efficiency and ease of replacement compared to traditional separate heating elements and tips. The kit includes I, IS, and K type tips for diverse applications.


Figure 4.2: ашыкview of C245 one-piece soldering iron tips.

• Тез алмаштыруучу ширетүүчү үтүктүн учтарын кармагыч: Designed for rapid and tool-free replacement of high-temperature soldering iron tips, enhancing workflow efficiency.


Figure 4.3: Quick change soldering iron tips holder in action.

Видео 4.2: Бүттүview of the SUGON A9 soldering station, including quick tip change.
• Автоматтык күтүү режими: The soldering iron handle enters a hibernation state when placed in its bracket, extending the lifespan of the heating core. Picking up the handle instantly heats it back to the set temperature.


Figure 4.4: Automatic hibernation feature.

• Temperature Memory Storage: Three programmable channels (CH1, CH2, CH3) allow you to store and quickly recall frequently used temperature settings.


Figure 4.5: Control panel with temperature memory storage buttons.

• Adjustable Standby Temperatures: Offers four adjustable standby temperature settings (0, 302, 356, 392°F or 0, 150, 180, 200°C) to suit different work requirements.

Figure 4.6: Adjustable standby temperature settings.
• Dual Cleaning Tools: Includes both a copper wire cleaning ball and a high-temperature cleaning sponge for effective and fast tip cleaning.


Figure 4.7: Included cleaning tools.

• Ergonomic Design with LCD Screen: Features an ergonomically designed station with a clear LCD screen and intuitive operation buttons for easy temperature adjustment and function settings.

5. Орнотуу

Follow these steps to set up your SUGON A9 245 Soldering Station:

1. Тутканы туташтыруу: Connect the soldering handle cable to the handle socket on the host machine. Ensure it is securely connected to prevent damage to the control circuit board.
2. Insert Heating Core: Insert the heating core (soldering iron tip) into the handle.
3. Орун туткасы: Place the soldering handle into the handle rack.
4. Туташуу кубаты: Connect the power supply cord to the station and then to a universal 110V/220V AC power outlet.
5. Күйгүзүү: Turn on the power switch. The display window will show the standby temperature, indicating the station is ready for operation.

Figure 5.1: Initial setup and connection instructions.

6. Иштөө нускамалары

6.1 Температураны жөндөө

• Increasing Температура: басыңыз UP (▲) button once to increase the set temperature by 1°C/°F. Hold the button to rapidly increase the temperature. The station will reach the target temperature quickly.
• Жарлыкasing Температура: басыңыз ылдый (▼) button once to decrease the set temperature by 1°C/°F. Hold the button to rapidly decrease the temperature.

6.2 Temperature Memory Storage (CH1, CH2, CH3)

The station allows you to store and recall three different temperature settings:

• Сактоо үчүн: Set your desired temperature. Press and hold the corresponding channel button (CH1, CH2, or CH3) for more than 1 second. The temperature will be saved to that channel.
• Кайра чалуу: Press the desired channel button (CH1, CH2, or CH3) briefly (less than 1 second) to recall the stored temperature.

6.3 Celsius/Fahrenheit Conversion

To switch between Celsius (°C) and Fahrenheit (°F) display modes:

• басыңыз SET button while the power is on. The unit will toggle between °C and °F.

Figure 6.1: Celsius/Fahrenheit conversion.

6.4 Ачкычты кулпулоо функциясы

To prevent accidental temperature changes, you can lock the control buttons:

• басып, кармап туруңуз CH1 key while the station is off. Then, turn the unit on. The display will show "LOA on" to indicate the key lock is enabled.
• To disable the key lock, repeat the same procedure. The display will show "LOA off".

6.5 Үн сигналынын орнотуулары

You can enable or disable the buzzer sound:

• басып, кармап туруңуз CH2 key while the station is off. Then, turn the unit on. The display will show a speaker icon with a line through it (disabled) or without a line (enabled).

6.6 Adjustable Standby Temperature Settings

The station offers four preset standby temperatures:

• While the station is off, press and hold the CH3 key. Then, turn the unit on to enter the standby temperature setting interface.
• The available standby temperatures are 0°C/0°F, 150°C/302°F, 180°C/356°F, and 200°C/392°F.
• Кыскача басыңыз CH3 to cycle through and select your desired standby temperature.

6.7 Температураны калибрлөө

If the temperature reading is inaccurate, you can calibrate the station:

• басып, кармап туруңуз SET key. The machine enters the temperature calibration mode.
• колдонуу UP (▲) жана ылдый (▼) buttons to adjust the displayed temperature to match an external temperature measurement (e.g., with a thermocouple).
• Басыңыз SET again to save the calibration and exit the mode.

6.8 Soldering Iron Tip Replacement

The quick-change holder allows for easy tip replacement:

1. Insert the soldering iron tip into the holder.
2. Snap the soldering iron tip onto the holder and pull out to remove.
3. Align the handle with the soldering iron tip to be replaced.
4. Slowly pull the soldering iron tip out of the holder. If an "S-E" code appears, it indicates improper use; re-insert and try again.
5. Insert the new soldering iron tip firmly into the small hole next to it. The "S-E" code should disappear, and the unit can be used normally.
6. Soldering head replacement is complete.

Figure 6.2: Step-by-step instructions for quick tip replacement.

7. Техникалык тейлөө

Proper maintenance ensures the longevity and optimal performance of your soldering station:

• Кеңеш тазалоо: Regularly clean the soldering iron tip using the provided copper wire cleaning ball or the high-temperature cleaning sponge. This removes oxidation and solder residue, ensuring efficient heat transfer.
• Автоматтык күтүү режими: Utilize the automatic hibernation feature by placing the iron in its holder when not in use. This significantly extends the lifespan of the heating core.
• Жалпы тазалоо: Keep the station and handle clean and free of dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
• Сактагыч: When not in use for extended periods, store the soldering station in a dry, dust-free environment.

8. Кыйынчылыктарды

If you encounter issues with your SUGON A9 245 Soldering Station, refer to the following common problems and solutions:

Эгер бул чечимдерди колдонууга аракет кылгандан кийин көйгөй чечилбесе, кошумча жардам алуу үчүн кардарларды колдоо бөлүмүнө кайрылыңыз.

9. Техникалык шарттар

10. Кепилдик жана колдоо

The SUGON A9 245 Soldering Station comes with a 12-month quality warranty service from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please note that consumables such as soldering iron tips, high-temperature cleaning sponges, and copper wire cleaning balls are not covered under this warranty.

For any questions, technical support, or warranty claims, please contact the seller or manufacturer through your purchase platform. Provide your order number and a detailed description of the issue for prompt assistance.