CREWORKS CIM-9036

CREWORKS Commercial Ice Maker CIM-9036 Instruction Manual

Model: CIM-9036

1. Киришүү

Thank you for choosing the CREWORKS Commercial Ice Maker, model CIM-9036. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your ice machine. Please read this manual thoroughly before use and retain it for future reference.

CREWORKS Commercial Ice Maker CIM-9036

Image 1.1: The CREWORKS Commercial Ice Maker CIM-9036, a stainless steel unit designed for efficient ice production.

2. Коопсуздук нускамалары

ЭСКЕРТҮҮ: Бул коопсуздук көрсөтмөлөрүн аткарбоо өрткө, электр тогуна урунууга же жаракат алууга алып келиши мүмкүн.

  • кубат менен камсыз кылуу Voltage прибордун рейтингинде көрсөтүлгөн.
  • Do not operate the ice maker with a damaged power cord or plug. Contact qualified service personnel for repair.
  • Шайманды жылуулук булактарынан жана түз күн нурунан алыс кармаңыз.
  • Шайманды, шнурду же сууга же башка суюктуктарга батырбаңыз.
  • Unplug the ice maker before cleaning, maintenance, or when not in use.
  • Бул шайман физикалык, сенсордук же акыл-эс жөндөмү начар же тажрыйбасы жана билими жок адамдар (анын ичинде балдар) тарабынан колдонууга арналбайт, эгерде алардын коопсуздугуна жооптуу адам тарабынан шайманды колдонуу боюнча көрсөтмө болбосо .
  • Муз жасоо үчүн ичүүчү сууну гана колдонуңуз.
  • Агрегаттын айланасын туура желдетүүнү камсыз кылыңыз. Аба желдеткичтерин жаап албаңыз.

3. Орнотуу жана орнотуу

Proper setup is crucial for optimal performance and longevity of your ice maker. Follow these steps carefully:

  1. Пакеттен чыгаруу: Муз жасагычты таңгагынан кылдаттык менен чыгарыңыз. Ар кандай жеткирүү зыянын текшериңиз. Зарыл болсо, келечектеги ташуу үчүн таңгагын сактаңыз.
  2. Жайгашкан жери: Place the unit on a stable, level surface in a well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for air circulation.
  3. Суу туташуу: The ice maker offers two water input options:
    • Direct Water Supply: Connect the ice maker to a cold water tap using the provided water inlet hose. Ensure all connections are secure to prevent leaks. A water filter is recommended for optimal ice quality.
    • Бөтөлкөдөгү суу менен камсыздоо: Alternatively, you can place a standard bottled water dispenser on top of the unit for a manual water supply.
  4. Дренаж: Connect the water drain hose to the unit and ensure it leads to a suitable drain. The drain must be lower than the ice maker's drain outlet for gravity drainage.
  5. Кубат туташуу: Электр шнурын жерге туташтырылган электр розеткасына сайыңыз.
Water connection diagram for CREWORKS Ice Maker

Image 3.1: Diagram illustrating the two water connection methods: direct tap connection with filter (left) and bottled water supply (right).

4. Иштөө нускамалары

The CREWORKS Commercial Ice Maker features an intuitive control panel for easy operation.

Intuitive control panel of the CREWORKS Ice Maker

Image 4.1: Close-up of the intuitive control panel and LCD screen, showing various settings and indicators.

  1. Күйгүзүү: Түзмөктү күйгүзүү үчүн башкаруу панелиндеги кубат баскычын басыңыз.
  2. Алгачкы муз өндүрүү: The machine will automatically start the ice-making cycle. The LCD screen will display relevant information such as ambient temperature and ice-making time.
  3. Adjusting Ice Thickness/Cycle Time: Use the '+' and '-' buttons on the control panel to adjust the ice-making cycle duration, which influences the thickness of the ice cubes.
  4. Автоматтык иштетүү: The ice maker can be programmed for automatic start and stop times, allowing you to schedule ice production as needed. Refer to the control panel for specific programming instructions.
  5. Муз чогултуу: Once an ice-making cycle is complete, the ice cubes will drop into the storage bin. The unit will pause if the ice bin is full (indicated by "Ice Full" on the display) and resume when ice is removed.
Three-step ice making process for CREWORKS Ice Maker

Image 4.2: Visual guide showing the simple three-step process: 1. Open water source, 2. Adjust ice making time on LCD, 3. Collect ice.

5. Техникалык тейлөө жана тазалоо

Regular cleaning and maintenance ensure hygienic ice production and extend the lifespan of your appliance.

  1. Автоматтык тазалоо функциясы: The ice maker is equipped with an auto-cleaning function. Press the "Cleaning" button on the control panel to initiate this cycle. This helps maintain internal hygiene.
  2. Тышкы тазалоо: Агрегаттын сыртын жумшак менен сүртүңүз, гamp cloth. For stainless steel surfaces, use a non-abrasive cleaner designed for stainless steel.
  3. Муз челектерин тазалоо: Periodically remove the ice bin and wash it with mild soap and warm water. Rinse thoroughly and dry before placing it back.
  4. Суу системасын тазалоо: For thorough cleaning of the water system, it is recommended to run a cleaning solution (e.g., diluted vinegar or commercial ice maker cleaner) through the system periodically, followed by several rinses with fresh water. Always refer to the specific instructions for the cleaning solution used.
  5. Аба чыпкасын тазалоо: The air vents and condenser coils should be cleaned regularly to ensure efficient cooling. Use a soft brush or vacuum cleaner to remove dust and debris.
Auto-cleaning function of CREWORKS Ice Maker

Image 5.1: A hand activating the auto-cleaning function on the control panel, highlighting the importance of hygiene.

6. Кыйынчылыктарды

Кардарларды колдоо кызматына кайрылуудан мурун, төмөнкү жалпы көйгөйлөрдү жана аларды чечүү жолдорун караңыз:

КөйгөйМүмкүн себепЧечим
Муз жасоочу муз чыгарбайт.No water supply; clogged water filter; ambient temperature too high; power issue.Check water connection and supply; replace water filter; ensure proper ventilation; check power cord and outlet.
Муз кубиктери өтө кичинекей же жумшак.Short ice-making cycle; high water temperature; poor ventilation.Increase ice-making cycle duration using '+' button; ensure cold water supply; improve ventilation around the unit.
"Ice Full" indicator remains on.Ice bin is full; ice sensor is blocked or faulty.Remove ice from the bin; clean the ice sensor area.
Иш учурунда адаттан тыш ызы-чуу.бирдиги деңгээл эмес; желдеткич тоскоолдук; бош компоненттери.Ensure the unit is on a level surface; check for obstructions in fan area; contact support if noise persists.
Суунун агып чыгышы.Loose water connections; clogged drain hose.Tighten all water inlet and drain connections; clear any blockages in the drain hose.

7. Техникалык шарттар

Technical details for the CREWORKS Commercial Ice Maker CIM-9036:

  • Модел: CIM-9036
  • Бренд: ЭКИПАЖДАР
  • Күч: 480 Ватт
  • Тtage: 220 вольт
  • Күнүмдүк муз өндүрүү: Up to 58 kg (when water temperature is below 5°C)
  • Ice Cubes per Batch: 36
  • Муз сактоо сыйымдуулугу: 10 кг
  • Продукциянын өлчөмдөрү (болжолдуу): 43 см (тереңдик) x 36 см (туурасы) x 76 см (бийиктик)
  • Ызы-чуу деңгээли: <45 дБ
  • Материал: Тамак-аш-класс дат баспас болот
Dimensions diagram for CREWORKS Ice Maker

Image 7.1: Diagram showing the approximate dimensions of the ice maker: 43 cm depth, 36 cm width, and 76 cm height.

8. Кепилдик жана Кардарларды колдоо

For warranty information or technical assistance, please contact CREWORKS customer support. Keep your purchase receipt as proof of purchase.

Contact information can typically be found on the CREWORKS official webсайтында же продуктунун таңгагында.

© 2023 CREWORKS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.