AsperX AX2500 Car Jump Starter User Manual

Introduction

Thank you for choosing the AsperX AX2500 Car Jump Starter. This device is designed to provide a reliable and safe solution for starting 12V vehicles with dead batteries, and also serves as a portable power bank and LED flashlight. Please read this manual thoroughly before use to ensure proper operation and safety.

Маанилүү коопсуздук маалыматы

Түзмөккө же унаага жаракат алуунун же бузулуунун алдын алуу үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:

• Секирүү стартери же кабелдери бузулуп калса, унааны секирип от алдырууга аракет кылбаңыз.
• Ensure proper polarity when connecting the jumper cables to the vehicle battery. Incorrect connection can cause sparks and damage.
• Кызыл жана кара кл жол бербеamps to touch each other once connected to the jump starter.
• Стартерди балдардан алыс кармаңыз.
• Do not expose the jump starter to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight for extended periods.
• Do not disassemble, modify, or attempt to repair the jump starter.
• Use only the provided smart jumper cables and charging accessories.
• Унааны от алгандан кийин 30 секунддун ичинде унаанын аккумуляторунан стартерди алып салыңыз.

Сүрөт: Ички view of the AsperX AX2500 jump starter highlighting its intelligent protection features, including zero spark and zero damage design, and operating temperature range of -4°F to 140°F.

Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

• AsperX AX2500 Portable Car Jump Starter
• Smart Jumper Cable with Clamps
• USB Type-C кубаттоочу кабель
• Сактоочу куту
• Тамеки күйгүзүүчү адаптер
• User Manual

Image: All items included in the AsperX AX2500 jump starter package.

Продукт бүттүview

Familiarize yourself with the components of your AsperX AX2500 jump starter:

Image: Detailed diagram of the AsperX AX2500 jump starter with numbered labels for each component.

1. 12V Jumper Cable Port
2. USB-C Quick Charge Input/Output (PD 18W)
3. USB Quick Charge Output (USB-A)
4. LED фонарик
5. 12V 10A DC Output
6. Кубат баскычы
7. Күч индикаторунун жарыктары
8. Warning Light Switch
9. Эскертүү жарыгы

Орнотуу жана заряддоо

Jump Starterди кубаттоо

Before first use, fully charge the AsperX AX2500. It is recommended to recharge the unit every 3-6 months to maintain battery health, even if not used.

1. Connect the provided USB Type-C charging cable to the USB-C Quick Charge Input/Output port (2) on the jump starter.
2. Connect the other end of the USB Type-C cable to a compatible USB wall adapter (not included) or car charger.
3. The Power Indicator Lights (7) will illuminate and flash during charging. All four lights will be solid when fully charged.

The 21000mAh capacity ensures multiple uses and can charge other devices quickly.

Image: The AsperX AX2500 jump starter displaying its various output ports and highlighting its 21000mAh capacity.

Иштөө нускамалары

Унааны секирип баштоо

The AsperX AX2500 is designed to jump start 12V vehicles with up to 10L gas or 7.3L diesel engines. Ensure the jump starter is at least 75% charged (3 indicator lights) before attempting a jump start.

1. Унааны даярдоо: Turn off the vehicle's ignition and all accessories (headlights, radio, air conditioning). Engage the parking brake.
2. Jumper кабелдерин Jump Starterге туташтырыңыз: Insert the blue plug of the smart jumper cable into the 12V Jumper Cable Port (1) on the jump starter. Ensure a firm connection. The indicator light on the smart cable should flash.
3. Connect ClampУнаа аккумуляторуна:
   • тиркөө кызыл (+) clamp унаанын оң (+) батарея терминалына туташтырыңыз.
   • тиркөө кара (-) clamp to the vehicle's negative (-) battery terminal or a solid, unpainted metal part of the vehicle's chassis away from the battery.

   The smart cable will perform a self-check. If the indicator light on the smart cable turns solid green, it's safe to proceed. If it shows a red light or beeps, check connections for correct polarity or if the battery is too low/damaged.

4. Унааны баштоо: Once the smart cable indicator is solid green, start your vehicle's engine.
5. Remove Jumper Cables: As soon as the vehicle starts, immediately remove the black (-) clamp from the vehicle, then the red (+) clamp. Disconnect the smart cable from the jump starter.

Image: The AsperX AX2500 jump starter connected to a vehicle battery using the smart jumper cables, ready for operation. This image also illustrates the wide range of vehicles it can start, including trucks, SUVs, motorcycles, and lawnmowers.

Power Bank катары колдонуу

The AsperX AX2500 can charge various electronic devices via its USB-C PD 18W port (2) and USB Quick Charge Output (3).

1. Connect your device's charging cable to the appropriate USB port on the jump starter.
2. Press the Power Button (6) to begin charging. The power indicator lights will show the remaining battery level.

Image: The AsperX AX2500 jump starter being used to charge a smartphone and a tablet simultaneously, demonstrating its power bank functionality.

Using the 12V DC Output

The 12V 10A DC Output (5) can power 12V accessories like car air pumps or vacuum cleaners using the included cigarette lighter adapter.

1. Connect the cigarette lighter adapter to the 12V 10A DC Output port (5).
2. Plug your 12V accessory into the cigarette lighter adapter.
3. Press the Power Button (6) to activate the output.

Image: The AsperX AX2500 jump starter connected to and powering a tire inflator through its 12V 10A DC output port.

Жарык диоддук чыракты колдонуу

The integrated LED Flashlight (4) has four modes: Normal, Strobe, SOS, and Red Warning Light.

1. Press and hold the Power Button (6) for 3 seconds to turn on the flashlight in Normal mode.
2. Press the Power Button (6) briefly to cycle through Strobe, SOS, and Red Warning Light modes.
3. Press and hold the Power Button (6) again for 3 seconds to turn off the flashlight.

Image: The AsperX AX2500 jump starter's LED flashlight in operation, illustrating its various lighting modes for different emergency and utility scenarios.

Техникалык тейлөө

• Сактагыч: Store the jump starter in a cool, dry place, away from direct sunlight and moisture.
• Толуктоо: Recharge the unit every 3-6 months to maintain optimal battery performance, even if it has not been used.
• Тазалоо: Агрегатты жумшак, кургак чүпүрөк менен сүртүңүз. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.
• Батареяга кам көрүү: Батареяны ашыкча заряддабаңыз же толугу менен бошотпоңуз.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

The AsperX AX2500 Car Jump Starter comes with a 2-year technical support warranty.

If you encounter any issues or have questions regarding your product, please contact AsperX customer support. Refer to the contact information provided in your original purchase documentation or on the official AsperX webсайт.