Flutesan Solar Battery Controller User Manual

1. Киришүү

Thank you for choosing the Flutesan Solar Battery Controller. This device is designed to manage the power flow from your solar panel to your battery, ensuring efficient charging and protecting your battery from overcharge and over-discharge. It features an adjustable LCD display, dual USB ports, and PWM auto-parameter management. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your solar system.

2. Коопсуздук маалыматы

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the controller, battery, or other components, and may void your warranty.

• Ensure all connections are correct and secure before connecting to power. Incorrect wiring can cause damage.
• Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order.
• The controller is designed for 12V/24V lead-acid batteries (GEL, FLOODED, SLD). Do not use with other battery types unless specified.
• Install the controller in a well-ventilated, dry, and cool environment, away from direct sunlight, high temperatures, and moisture.
• Do not disassemble or attempt to repair the controller yourself. Refer to qualified personnel for service.
• The controller has built-in overcurrent, open circuit, reverse polarity, and short-circuit protection. These are self-recovery types and do not harm the controller.

3. Продукт бүтүп калдыview

The Flutesan Solar Battery Controller is equipped with an industrial-grade main control chip and a high-definition LCD display for clear operation and monitoring.

3.1. Негизги өзгөчөлүктөрү

• Industrial-Grade Main Control Chip: Ensures stable and reliable performance.
• Full 3-Level PWM Charge Management: Optimizes battery charging for extended life.
• Dual MOS Anti-Backflow Circuit: Prevents current from flowing back from the battery to the solar panel at night.
• Ultra-Low Heat Generation: Improves system efficiency and longevity.
• Комплекстүү коргоо функциялары: Includes overcurrent, open circuit, reverse polarity, and short-circuit protection.
• Adjustable LCD Display: Provides clear, intuitive monitoring of system parameters.
• Dual USB Ports (5V/2A): Supports charging of mobile phones and other 5V devices.
• Automatic 12V/24V System Identification: Системанын томун автоматтык түрдө аныктайтtage.
• ABS Engineering Plastic Shell: High strength, impact resistance, anti-aging, and corrosion resistance for enhanced durability.

3.2. Продукциянын компоненттери

Сүрөт 3.2.1: Алдыңкы view of the Flutesan Solar Battery Controller, highlighting the LCD display, control buttons, and dual USB ports.

Figure 3.2.2: Product dimensions of the solar charge controller (approximately 13.3cm/5.23in length, 7cm/2.75in width, 5cm/1.96in height).

3.2.3-сүрөт: Детальдуу view of the LCD display and control buttons, showing indicators for Voltage, Hour, Amper, Load, Output, and Floating Charge.

4. Орнотуу жана орнотуу

Follow these steps for proper installation of your solar charge controller. Ensure all power sources are disconnected before making any connections.

1. Орнотуу сайтын даярдоо: Choose a dry, well-ventilated location away from direct sunlight and moisture. Ensure there is sufficient space around the controller for air circulation.
2. Батареяны туташтыруу: Connect the battery to the controller's battery terminals (marked with battery symbols). Ensure correct polarity (+ to + and - to -). The LCD display will light up if the connection is successful.
3. Күн панелин туташтыруу: Connect the solar panel to the controller's solar panel terminals (marked with solar panel symbols). Ensure correct polarity.
4. Жүктөөнү туташтыруу (кошумча): Connect your DC load to the controller's load terminals (marked with light bulb symbols). Ensure correct polarity. Do not connect AC loads directly to the controller.
5. Байланыштарды текшерүү: Double-check all connections for tightness and correct polarity before applying power.

Figure 4.1: System Connection Diagram. Always connect battery first, then solar panel, then load.

5. Иштөө нускамалары

The controller features an intuitive LCD display and three buttons for easy operation and parameter adjustment.

5.1. Баскыч функциялары

• MENU баскычы: Short press to cycle through various display interfaces and parameters. Long press for 5 seconds to enter or exit parameter setting mode.
• UP баскычы: Used to increase parameter values in setting mode.
• DOWN/ON/OFF Button: Used to decrease parameter values in setting mode. Short press to turn the load ON/OFF when on the main display interface.

Figure 5.1: Browsing Interface and Parameter Setting. Short press MENU to cycle, long press to set.

5.2. Browsing Display Interfaces

баскычын кыска басыңыз МЕНЮ key to cycle through the following interfaces:

• Main Page (Battery Voltage, Solar Charge Status, Load Status)
• Float Voltage (F01)
• Discharge Recovery Voltage (F02)
• Бошотуунун кесилиши Voltage (F03)
• Load Working Mode (F04)
• Battery Type (F05)

5.3. Параметр орнотуу

To adjust parameters:

1. Navigate to the desired parameter interface (e.g., F01, F02, F03, F04, F05) by short pressing the МЕНЮ баскычы.
2. көпкө басыңыз МЕНЮ key for 5 seconds until the number on the display starts flashing. This indicates you are in setting mode.
3. колдонуу UP жана ылдый keys to adjust the parameter value.
4. Once the desired value is set, long press the МЕНЮ key for 5 seconds again to save the setting and exit the setting mode. The number will stop flashing.
5. To restore default values, long press the UP key for 5 seconds when in interfaces 2-5.

Эскертүү: The controller automatically identifies 12V/24V systems. Ensure your battery type setting (F05) matches your battery for optimal charging.

6. Техникалык тейлөө

Үзгүлтүксүз тейлөө сиздин күн зарядын контроллериңиздин узак мөөнөттүү жана оптималдуу иштешин камсыз кылат.

• Тазалык: Башкаргычты таза, чаң менен таштандылардан таза кармаңыз. Бетин кургак чүпүрөк менен сүртүңүз.
• Байланыштары: Periodically check all wiring connections to ensure they are tight and free from corrosion. Loose connections can cause overheating and damage.
• Вентиляция: Контроллердин ысып кетишине жол бербөө үчүн, орнотуу аянтынын жакшы желдетилгенин текшериңиз.
• Экологиялык шарттар: Protect the controller from extreme temperatures, direct water exposure, and high humidity.
• Батареянын ден соолугу: Monitor your battery's health and ensure it is properly maintained according to its manufacturer's guidelines.

7. Кыйынчылыктарды

Бул бөлүмдө сиз күн зарядын контролдоочу менен кабылышы мүмкүн болгон жалпы маселелерди карайт.

8. Техникалык шарттар

9. Кепилдик жана колдоо

Flutesan products are manufactured with high-quality materials and undergo strict quality control. For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer.

For technical support, troubleshooting assistance, or any inquiries regarding your Flutesan Solar Battery Controller, please contact our customer service team through the retailer's support channels or visit the official Flutesan store page on Amazon.

Онлайн колдоо: Flutesan Store on Amazon