Дорман 956-401

Dorman 956-401 Battery Fuse and Terminal Kit User Manual

Модели: 956-401

Продукт бүттүview

This manual provides essential information for the installation, operation, and maintenance of the Dorman 956-401 Battery Fuse and Terminal Kit. This kit is designed as a direct replacement for the original battery fuse and terminal in specified Nissan models, ensuring reliable electrical system performance.

комплект камтыйт:

  • 1 Батареянын сактагычы
  • 1 Батарея терминалы
Dorman 956-401 Battery Fuse and Terminal Kit

Image: The Dorman 956-401 Battery Fuse and Terminal Kit, showing both the fuse assembly and the battery terminal.

Шайкештик

The Dorman 956-401 Battery Fuse and Terminal Kit is compatible with the following Nissan vehicle models and years:

  • Nissan Altima: 2007, 2008, 2009, 2010, 2011, 2012, 2013
  • Nissan Maxima: 2009, 2010, 2011, 2012, 2013, 2014
  • Nissan Murano: 2008, 2009, 2010, 2011, 2012, 2013, 2014

It is recommended to verify fitment for your specific vehicle trim using a vehicle compatibility tool before installation.

Коопсуздук маалыматы

ЭСКЕРТҮҮ: Бул продукт Калифорния штатына рак жана тубаса кемтиктерди же башка репродуктивдик зыян келтирерин белгилүү болгон химиялык заттарды камтыйт. Көбүрөөк маалымат алуу үчүн, төмөнкү дарекке кириңиз: www.P65Warnings.ca.gov.

Always disconnect the negative battery terminal before working on any electrical components of your vehicle. Wear appropriate personal protective equipment, including safety glasses and gloves. Consult a qualified automotive technician if you are unsure about any installation steps.

Орнотуу (Орнотуу)

This section outlines the general steps for replacing the battery fuse and terminal. Specific vehicle procedures may vary. Refer to your vehicle's service manual for detailed instructions.

  1. Даярдоо:
    • Унаанын от алдыруу системасы өчүрүлгөнүнө жана кол тормозу иштеп турганына ынаныңыз.
    • Locate the vehicle's battery, typically under the hood.
    • Gather necessary tools: wrench set, battery terminal cleaner, wire brush.
  2. Батареяны ажыратыңыз:
    • Using a wrench, loosen the nut on the negative (-) battery terminal and remove the cable. Isolate the cable to prevent accidental contact.
    • Next, loosen the nut on the positive (+) battery terminal and remove the cable.
  3. Remove Old Fuse/Terminal Assembly:
    • Carefully inspect the existing battery fuse and terminal assembly. Note how it is mounted and connected.
    • Disconnect any additional wires or connectors attached to the old assembly.
    • Remove the mounting bolts or clips securing the old assembly to the vehicle.
    Жогорку view of Dorman 956-401 Battery Fuse and Terminal Kit

    Сүрөт: Жогорку view of the Dorman 956-401 kit, showing the fuse block and terminal from above, useful for understanding connections.

  4. Install New Fuse/Terminal Assembly:
    • Clean the battery posts and any connecting surfaces with a battery terminal cleaner and wire brush to ensure good electrical contact.
    • Position the new Dorman 956-401 battery fuse and terminal kit in the correct location.
    • Secure the assembly using the appropriate mounting hardware.
    • Connect any additional wires or connectors that were removed from the old assembly.
    Side view of Dorman 956-401 Battery Fuse and Terminal Kit

    Сүрөт: каптал view of the Dorman 956-401 kit, illustrating the profile and connection points of the fuse block and terminal.

  5. Батареяны кайра туташтыруу:
    • Connect the positive (+) battery cable to the new terminal and tighten the nut securely.
    • Connect the negative (-) battery cable to the new terminal and tighten the nut securely.
    • Бардык туташуулардын бекем жана коррозияга учурабагандыгын текшериңиз.
    Close-up of the battery terminal component

    Image: A detailed close-up of the battery terminal component, highlighting its design and connection point.

  6. Акыркы текшерүү:
    • Verify that all tools are removed from the engine bay.
    • Start the vehicle and check for proper electrical function.

Операция

The Dorman 956-401 Battery Fuse and Terminal Kit functions as a critical component of your vehicle's electrical system. Its primary role is to protect the vehicle's electrical circuits from overcurrent conditions, which can be caused by short circuits or excessive electrical load. The integrated fuse is designed to blow, or open, when current exceeds a safe level, thereby preventing damage to more expensive electrical components and wiring.

Once installed, the kit operates passively, continuously monitoring the electrical current flow from the battery. No user interaction is required for its normal operation.

Техникалык тейлөө

Regular maintenance of your vehicle's electrical system, including the battery fuse and terminal, can extend its lifespan and ensure reliable performance.

  • Мезгилдүү текшерүү: Annually, or during routine vehicle service, inspect the battery fuse and terminal for signs of corrosion, loose connections, or physical damage.
  • Тазалоо: If corrosion is present on the battery terminals or the fuse assembly, disconnect the battery (negative first, then positive) and clean the affected areas with a battery terminal brush and a solution of baking soda and water. Rinse with clean water and dry thoroughly before reconnecting.
  • Тыюулугун текшерүү: Ensure all connections to the battery terminal and fuse assembly are tight. Loose connections can lead to poor electrical contact, heat buildup, and potential system malfunctions.
  • Сактагычты алмаштыруу: If the fuse within the assembly blows, it indicates an electrical issue. Replace the fuse with an identical type and rating. Investigate the cause of the blown fuse before replacing to prevent recurrence.

Проблемаларды чечүү

If you experience electrical issues after installing or while using the Dorman 956-401 kit, consider the following troubleshooting steps:

СимптомМүмкүн себепЧечим
Vehicle has no power (dead battery symptoms)Blown battery fuse; Loose or corroded battery terminals; Dead batteryCheck the fuse within the assembly and replace if blown. Clean and tighten battery terminals. Test battery charge.
Intermittent electrical issuesLoose connections at the fuse or terminal; Corroded connectionsInspect and tighten all connections. Clean any corrosion present.
Флюс кайра-кайра күйөтShort circuit in vehicle's electrical system; Overload on a circuitThis indicates a deeper electrical problem. Consult a qualified automotive technician for diagnosis and repair. Do not install a higher-rated fuse.
Kit does not fit specified Nissan modelIncorrect part for vehicle trim; Manufacturing defectDouble-check vehicle compatibility. Contact Dorman customer support or the retailer for assistance.

Техникалык шарттар

АтрибутНарк
Модель номери956-401
БрендДорман
Элемент Салмагы6.1 унция
Продукциянын өлчөмдөрү6.49 x 5.11 x 2.16 дюйм
Келип чыккан өлкөЖапония
OEM бөлүктүн номериFH40; 24380-JA00A
Тtage Рейтинг600 вольт
Камтылган компоненттер1 Battery Fuse, 1 Battery Terminal

Кепилдик жана колдоо

Dorman products are engineered for reliable performance and durability. For specific warranty information regarding the Dorman 956-401 Battery Fuse and Terminal Kit, please refer to the warranty documentation included with your purchase or visit the official Dorman webсайт.

For technical support, installation assistance, or inquiries about product compatibility, please contact Dorman customer service. You can find contact information on the Dorman webсайты же продукт сатуучу аркылуу.

Дорман расмий Webсайт: www.dormanproducts.com

© 2024 Dorman Products. Бардык укуктар корголгон.

Бул колдонмо маалыматтык максаттар үчүн гана. Татаал оңдоолор үчүн ар дайым квалификациялуу адиске кайрылыңыз.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.