SOLVTIN S6 Pro Max секирүүчү стартер колдонуучусунун колдонмосу

Продукт бүттүview

The SOLVTIN S6 Pro Max is a powerful and versatile portable battery jump starter designed to revive dead vehicle batteries quickly and efficiently. With a peak current of 3000A, it can start 12V vehicles with up to 10L gas or 8L diesel engines in seconds, even in extreme temperatures ranging from -4°F to 140°F. It offers up to 60 starts on a single charge.

Beyond its primary function, this device features a 100W two-way fast charging port, allowing it to be fully recharged in approximately one hour. It also serves as a 20000mAh portable power bank for charging various USB devices, including laptops, and includes a 400-lumen LED light with multiple modes (flashlight, strobe, SOS) for emergencies.

Safety is paramount, with 8 built-in safety protections and an IP65 water and dust resistant enclosure ensuring durable and reliable operation.

Image: The SOLVTIN S6 Pro Max Jump Starter connected to a car battery, demonstrating its ability to revive vehicles quickly.

Image: A chart illustrating the powerful jump performance of the SOLVTIN S6 Pro Max, showing compatibility with various engine sizes from 1.5L motorcycles to 10L gas and 8L diesel vehicles.

Эмне камтылган

Upon unboxing your SOLVTIN S6 Pro Max Jump Starter, please ensure all the following items are present:

• 1x SOLVTIN S6 PRO MAX Jump Starter Battery Pack
• 1x SC 100W Car Charger
• 1x Heavy Duty Jumper Cables
• 1x DC 12V Cigarette Lighter Adapter
• 1x USB-A to C Cable
• 1x USB-C - C кабели
• 1x Колдонуучунун колдонмосу
• 1x Кепилдик картасы

Image: A flat lay of all components included in the SOLVTIN S6 Pro Max Jump Starter package, including the main unit, cables, charger, and manual.

Жайгашуу

Баштапкы заряддоо

Before first use, it is recommended to fully charge your SOLVTIN S6 Pro Max. The device features a 100W two-way fast charging port for rapid replenishment.

1. Connect the provided SC 100W car charger or your own compatible charger to the 100W in/out port on the jump starter.
2. Заряддагычты кубат булагына сайыңыз.
3. The LED display will show the charging status. A full charge from 0% to 100% typically takes about 1 hour. A 3-minute charge can bring the device to 20% capacity.

Image: The SOLVTIN S6 Pro Max Jump Starter connected via its Type-C port for 100W super fast charging, with charging times displayed on the screen.

Image: An illustration highlighting the blazing-fast 100W charging speed of the SOLVTIN S6 Pro Max, showing it can reach 100% charge in just 1 hour.

LED дисплейди түшүнүү

The 3.2-inch LED screen provides crucial information about the device's status and jump-starting instructions.

• Battery Storage Level: Shows the current charge percentagсекирүү стартер.
• Small Current Mode: Indicates when the device is in low-power charging mode for small electronics.
• Тескери туташуу жөнүндө эскертүү: Alerts if the clampс батарея терминалдарына туура эмес туташтырылган.
• Төмөн температура эскертүүсү: Indicates if the operating temperature is too low for optimal performance.
• "READY" Solid: Means the unit is ready to start the vehicle.
• "READY" Blinks: Means the car battery voltage is too low, and the override mode may need to be activated (refer to troubleshooting).

Сүрөт: деталдуу view of the 3.2-inch Smart LED Screen on the SOLVTIN S6 Pro Max, showing battery percentage жана заряддоо абалы.

Image: A diagram labeling the various indicators and buttons on the SOLVTIN S6 Pro Max, including Battery Storage Level, Small Current Mode, and the BOOST button.

Иштөө нускамалары

Унааны секирип баштоо

Унааңызды коопсуз от алдыруу үчүн төмөнкү кадамдарды аткарыңыз:

1. Унааны даярдоо: Ensure the vehicle is in PARK (automatic) or NEUTRAL (manual) and the parking brake is engaged. Turn off all accessories (headlights, radio, AC, etc.).
2. Jumper кабелдерин туташтыруу:
   • кызыл (оң, +) cl туташтырууamp унаанын аккумуляторунун оң терминалына туташтырыңыз.
   • кара (терс, -) cl туташтырууamp унаанын аккумуляторунун терс терминалына.
   • Батарея терминалдарында коррозия жок экенин текшериңиз.
3. Jump Starterге туташыңыз: Plug the jumper cable connector into the jump starter's insulated port.
4. Дисплейди текшерүү: The LED display should show "READY" solid. If it blinks, the battery voltage is very low, and you may need to press the "BOOST" button (refer to troubleshooting).
5. Унаа баштоо: Once "READY" is solid, start your vehicle's engine.
6. Ажыратуу: After the vehicle starts, immediately disconnect the jumper cables from the jump starter, then from the vehicle battery (negative first, then positive).

Kindly Reminders:

• ● Батарея терминалдарында коррозия жок экенин текшериңиз.
• ● Ensure the battery power is higher than 20% before jump starting the vehicle.
• ● Ensure the vehicle is in PARK gear and all accessories (headlights, audio, etc.) are turned off.
• ● эки кл камсыз кылууampлар тийиштүү терминалдарга туташтырылган.
• ● Унаанын аккумуляторун туура туташтырардан мурун BOOST баскычын БАСБАҢЫЗ.

Image: A visual guide demonstrating the three main steps to jump start a car using the SOLVTIN S6 Pro Max: Connect Vehicle Battery, Wait for READY (solid), and Start Vehicle Engine.

Portable Power Bank катары колдонуу

The SOLVTIN S6 Pro Max doubles as a 20000mAh portable power bank, capable of charging various electronic devices.

• Connect your USB devices (phones, tablets, laptops, headsets, smartwatches, etc.) to the available USB output ports.
• The 15V/12A DC output port can power car accessories (under 15V).
• For low-current devices like headsets or smartwatches, switch to the small current mode if available (refer to the LED display section for indicator).

Image: The SOLVTIN S6 Pro Max functioning as a portable power bank, simultaneously charging a smartphone and a laptop, demonstrating its versatility.

LED жарык функциялары

The integrated 400-lumen LED light provides illumination in various situations:

• Кол чырак режими: Provides steady illumination for general use.
• Emergency Strobe Mode: Flashes rapidly to attract attention.
• SOS режими: Emits the international Morse code signal for distress (three short, three long, three short flashes).

Image: The 400-lumen LED light of the SOLVTIN S6 Pro Max illuminating an engine bay, showcasing its utility as a flashlight, emergency strobe, and SOS light.

Тейлөө жана сактоо

Proper maintenance and storage will extend the lifespan of your SOLVTIN S6 Pro Max Jump Starter.

• Кадимки заряддоо: To maintain battery health, it is recommended to recharge the device every 3 months, even if not in use.
• Тазалоо: Түзмөктү кургак, жумшак чүпүрөк менен сүртүңүз. Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонбоңуз.
• Сактагыч: Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures. The IP65 rating provides water and dust resistance, but avoid prolonged exposure to harsh conditions.
• Кабельге кам көрүү: Ensure jumper cables are clean and free of damage before and after each use. Store them neatly to prevent tangling or crimping.

Image: The SOLVTIN S6 Pro Max Jump Starter covered in water droplets, emphasizing its IP65 water and dust resistance and built-in safety protections.

Проблемаларды чечүү

Техникалык мүнөздөмөлөр

Кепилдик жана колдоо

Your SOLVTIN S6 Pro Max Jump Starter comes with a 2 ЖЫЛ гарантия сатып алынган күндөн тартып.

For technical assistance, troubleshooting, or warranty claims, SOLVTIN offers 24-hour online Lifetime Expert Technical Support.

Please refer to the warranty card included in your package for detailed terms and conditions.

For additional information or to download the official user manual, please visit the SOLVTIN User Manual (PDF).