LEQISMART S11 Electric Scooter Instruction Manual

1. Орнотуу жана чогултуу

The LEQISMART S11 Electric Scooter comes mostly pre-assembled, requiring minimal setup before its first use. Follow these steps to prepare your scooter for riding.

1.1 Кутудан чыгаруу жана алгачкы текшерүү

Carefully remove all components from the packaging. Ensure all parts are present and undamaged. The main components include the folded scooter body, handlebars (left and right), charger, and hex keys for assembly.

Image: The LEQISMART S11 Electric Scooter in its initial state, partially assembled within its packaging.

1.2 Скутерди ачуу

Locate the folding mechanism at the base of the handlebar stem. Lift the buckle lock and pull the stem upwards until it clicks securely into the upright position. Ensure the locking lever is fully engaged for safety.

1.3 Рулду бекитүү

The handlebars are labeled 'L' for left and 'R' for right. Carefully screw each handlebar into its corresponding side of the stem. Use the provided hex keys to tighten them securely. Ensure the brake lever (left side) and throttle (right side) are positioned comfortably for easy access.

Image: The scooter in its folded state, highlighting its compact design for portability.

1.4 Алгачкы заряддоо

Before your first ride, fully charge the scooter's battery. Connect the charger to the charging port located on the scooter's deck. The charging indicator on the charger will show the charging status. A full charge typically takes approximately 4.5 hours.

Video: An unboxing and test video of the LEQISMART S11 Electric Scooter, demonstrating assembly and initial features.

2. Иштөө нускамалары

Familiarize yourself with the scooter's controls and operating modes for a safe and enjoyable ride.

2.1 Powering On/Off and Headlight Control

Press and hold the power button (located on the display unit) to turn the scooter on or off. Double-press the power button to toggle the LED headlight on or off. The headlight is adjustable to direct illumination as needed.

Image: The scooter's display panel illustrating the three available speed modes (10km/h, 20km/h, 25km/h).

2.2 Ылдамдык режимдери

The scooter features three distinct speed modes, which can be cycled through by pressing the 'M' (Mode) button on the display unit:

• 1-режим (төмөн ылдамдык): Approximately 6 MPH (10 km/h). Ideal for beginners or crowded areas.
• Mode 2 (Medium Speed): Approximately 12 MPH (20 km/h). Suitable for general riding.
• Mode 3 (High Speed): Approximately 15.5 MPH (25 km/h). For experienced riders on open paths.

The current speed and battery level are displayed on the LED screen.

2.3 Throttle and Braking

The scooter uses a non-zero start mechanism for safety. To engage the motor, push off with your foot to gain a slight initial speed, then press the thumb throttle on the right handlebar. The scooter is equipped with a dual braking system for effective stopping:

• Электрондук тормоз: Activated by the brake lever on the left handlebar.
• барабан тормоз: A mechanical brake located on the rear wheel, also activated by the left brake lever.

Image: Close-up of the scooter's 8.5-inch pneumatic tires and the dual braking system for enhanced stability and safety.

Video: A detailed instructional video on operating the LEQISMART Electric Scooter, including controls and riding tips.

3. Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your LEQISMART S11 Electric Scooter.

3.1 Батареяга кам көрүү

The scooter is equipped with a 270Wh lithium-ion battery. To maximize battery life:

• Биринчи колдонуудан мурун толук кубаттаңыз.
• Avoid completely draining the battery. Recharge when the battery indicator shows low power.
• Store the scooter in a cool, dry place when not in use, and ensure it has some charge.

Сүрөт: деталдуу view of the scooter's integrated battery system.

3.2 Дөңгөлөктөрдү тейлөө

The 8.5-inch pneumatic tires require regular pressure checks. Maintain appropriate tire pressure for optimal ride comfort and range. Refer to the tire sidewall for recommended PSI. Regularly inspect tires for wear and tear or punctures.

3.3 Жалпы тазалоо жана сактоо

Скутерди жарнама менен сүртүңүзamp cloth after use. Avoid using excessive water or high-pressure sprays. Store the scooter in a dry environment, away from direct sunlight and extreme temperatures. The foldable design allows for easy storage.

4. Кыйынчылыктарды

Бул бөлүмдө скутериңиз менен кездешиши мүмкүн болгон кеңири таралган көйгөйлөр каралат.

4.1 Scooter Not Powering On

• Батареянын заряддалганын текшериңиз. Заряддоочу түзүлүштү туташтырып, индикатордун жарыгын текшериңиз.
• Verify that the power button is pressed and held correctly.

4.2 Кыскартылган аралык же ылдамдык

• Дөңгөлөктөрдүн басымын текшериңиз. Жетишсиз үйлөтүлгөн дөңгөлөктөр аралыкты жана ылдамдыкты бир топ төмөндөтүшү мүмкүн.
• Riding habits and terrain (e.g., frequent uphill climbs, heavy rider weight) can affect performance.
• Батарея толугу менен заряддалганын текшериңиз.

4.3 Ката коддору

If an error code appears on the display, consult the full user manual for specific code meanings and troubleshooting steps. Common codes may indicate motor, battery, or sensor issues.

5. Техникалык шарттар

Image: The LEQISMART S11 Electric Scooter with its core specifications highlighted.

6. Кепилдик жана колдоо

6.1 Кепилдик маалыматы

The LEQISMART S11 Electric Scooter comes with a 2-year manufacturer's limited warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the full user manual or contact customer support.

6.2 Кардарларды колдоо

For technical support, troubleshooting assistance, or warranty inquiries, please contact LEQISMART customer service. Contact information can typically be found in the full user manual or on the official LEQISMART webсайт.