Introduction
Thank you for choosing the BONTEC Monitor Wall Mount Bracket. This product is engineered to provide a secure, flexible, and ergonomic solution for mounting your computer monitor or small TV screen. Its gas spring system allows for smooth and effortless adjustments, helping to optimize your workspace and improve your viewing comfort. Please read this manual thoroughly before installation and use to ensure proper setup and safe operation.
Image: The BONTEC Monitor Wall Mount Bracket, showcasing its dual arm design and sleek black finish.
Коопсуздук маалыматы
Always adhere to the following safety guidelines during installation and operation:
- Ensure the wall structure can safely support the combined weight of the mount and your monitor. Consult a professional if unsure.
- Ар бир кол үчүн 8 кг (17.6 фунт) салмактан ашпаңыз.
- Verify your monitor's VESA pattern (75x75mm or 100x100mm) before installation.
- Use appropriate tools and follow all installation steps precisely.
- Балдарды жана үй жаныбарларын орнотуу аянтынан алыс кармаңыз.
- Жөндөө учурунда манжаларды же кабелдерди чымчып алуудан качыңыз.
- Do not attempt to modify the mount. Any modifications will void the warranty and may cause damage or injury.
Пакеттин мазмуну
Орнотууну баштоодон мурун, бардык компоненттердин бар экендигин текшериңиз:
- Monitor Wall Mount Bracket Assembly
- VESA плитасы(лары)
- Дубалга орнотуучу жабдуулар (бурамалар, якорьлор)
- Monitor Mounting Hardware (various screw sizes)
- Hex Keys (for assembly and gas spring adjustment)
- Көрсөтмө (бул документ)
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | GWM02 |
| Экрандын өлчөмүнүн шайкештиги | 13 - 27 дюйм |
| Салмак сыйымдуулугу (бир кол үчүн) | 17.6 фунтка чейин (8 кг) |
| VESA шайкештиги | 75x75мм, 100x100мм |
| Материал | Алюминий |
| Тит бурч | ±35 градус |
| Swivel Angle | 180 degrees (wall plate), 360 degrees (arm joint), ±80 degrees (monitor plate) |
| Айлануу | 360 degrees (portrait/landscape) |
| Бийиктигин тууралоо | 290 мм чейин |
| Arm Extension (Min/Max) | 87мм / 564мм |
Image: Diagram illustrating the universal compatibility, VESA sizes, and weight capacity of the mount.
Орнотуу жана орнотуу
Follow these steps carefully for a secure installation. It is recommended to have assistance during certain steps.
- Step 1: Mount the Wall Plate. Choose a suitable location on a sturdy wall. Use the provided wall mounting hardware to securely attach the wall plate. Ensure it is level and firmly fixed.
- Step 2: Mount the VESA Plate to your Monitor. Attach the VESA plate to the back of your monitor using the appropriate screws from the provided hardware kit. Ensure the screws are tightened securely but do not overtighten.
- Step 3: Hang your Monitor onto the Wall Bracket. Carefully lift your monitor with the attached VESA plate and slide it onto the arm's VESA head. Ensure it clicks into place or is secured with the locking mechanism.
- Step 4: Adjust the Gas Spring Tension. Use the provided hex key to adjust the gas spring tension. Turn clockwise to increase tension for heavier monitors (+) or counter-clockwise to decrease tension for lighter monitors (-). Adjust until the monitor stays at the desired height without drifting.
- Step 5: Tidy the Cables. Route your monitor cables through the integrated cable management channels along the arm. This helps maintain a clean and organized workspace.
- Step 6: Adjust Monitor Angle. Fine-tune the tilt, swivel, and rotation of your monitor to achieve your preferred viewбурч.
Image: A visual guide detailing the six steps for easy and fast installation of the monitor wall mount.
Image: Close-up of the gas spring adjustment mechanism, showing the plus and minus indicators for tension control.
Image: Illustration of the hidden cable management system, demonstrating how cables are routed through the arm for a tidy setup.
Иштөө нускамалары
The BONTEC Monitor Wall Mount Bracket offers a range of adjustments for optimal viewсооронуч:
- Бийиктигин тууралоо: Gently push or pull the monitor up or down to adjust its vertical position. The gas spring mechanism will hold it in place.
- Эңкейүүнү тууралоо: Grasp the top and bottom edges of your monitor and tilt it forwards or backwards to reduce glare and find your preferred viewing angle (up to ±35 degrees).
- Айланууну жөндөө: Rotate the monitor horizontally at the arm joints or the wall plate to change its viewing direction. The arm allows for 180-degree swivel at the wall and 360-degree swivel at the arm joint. The monitor plate itself can swivel ±80 degrees.
- Айлануу: Пейзаж жана портрет багыттарын которуу үчүн мониторду 360 градуска буруңуз.
Image: Diagram illustrating the full range of motion, including 180-degree swivel, 360-degree rotation, ±35-degree tilt, and height adjustment up to 290mm.
Техникалык тейлөө
To ensure the longevity and proper functioning of your BONTEC Monitor Wall Mount Bracket, follow these simple maintenance tips:
- Бардык бурамаларды жана туташууларды бекем жана бекем кармап туруу үчүн үзгүлтүксүз текшерип туруңуз. Зарыл болсо, кайра бекемдеңиз.
- Орноткучту жумшак, d менен тазалаңызamp кездеме. Финишке зыян келтирүүчү абразивдүү тазалагычтардан же эриткичтерден качыңыз.
- Periodically check the gas spring tension and adjust as needed, especially if you change monitors or notice the monitor drifting from its set position.
- Газ пружинанын механизмин майлабагыла.
Проблемаларды чечүү
If you encounter any issues with your monitor mount, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Монитор ийилип же каалаган бийиктикте турбайт. | Газ пружинанын чыңалуусу монитордун салмагы үчүн өтө төмөн. | Increase gas spring tension by turning the adjustment screw clockwise with the hex key. |
| Monitor is difficult to move up or down. | Газ пружинанын чыңалуусу монитордун салмагы үчүн өтө жогору. | Decrease gas spring tension by turning the adjustment screw counter-clockwise with the hex key. |
| Монитор солкулдап же өзүн туруксуз сезет. | Mounting screws are loose or wall is not sturdy enough. | Check all wall mounting screws and VESA plate screws. Ensure they are securely tightened. Verify wall integrity. |
| Кабелдер чачырап же чаташып калган. | Cables not routed through management system. | Route all cables through the integrated cable management channels on the arm. |
Кепилдик жана колдоо
BONTEC products are manufactured to high standards and undergo rigorous quality control. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official BONTEC webсайт.
If you require technical assistance, have questions about installation, or need to report a missing part, please contact BONTEC customer support. You can typically find contact information on the product packaging or on the BONTEC brand store page on Amazon.
Көбүрөөк маалымат алуу үчүн, киргиле BONTEC Store on Amazon.