iMaihom BDD130D-3

iMaihom 130W Dusk to Dawn Outdoor LED Flood Light

Model: BDD130D-3

1. Продукт бүтүп калдыview

The iMaihom 130W Dusk to Dawn Outdoor LED Flood Light is designed to provide powerful and efficient illumination for various outdoor spaces. Featuring 154 high-quality LED chips, it delivers up to 13000 lumens of 6500K daylight white light, equivalent to a 500W halogen bulb, offering significant energy savings. Its robust construction and intelligent features make it suitable for diverse applications.

  • Жогорку жарыктык жана энергиянын үнөмдүүлүгү: 130W power, 13000LM output, saving over 80% on electricity bills compared to traditional halogen bulbs.
  • Күүгүмдөн таңга чейин функция: Integrated photocell sensor automatically turns the light on at dusk and off at dawn.
  • Жөнгө салынуучу баштар: Three light heads can be rotated to direct light precisely where needed, covering up to 1850 sq. ft.
  • Узак жана аба ырайы: IP65 waterproof rating and full aluminum construction ensure resistance to rain, sleet, snow, and efficient heat dissipation for extended lifespan.
  • Ар тараптуу орнотуу: Suitable for wall, eave, soffit, ceiling, and pole mounting.

2. Коопсуздук маалыматы

Бул продуктуну орнотуудан же иштетүүдөн мурун бардык көрсөтмөлөрдү окуп чыгып, түшүнүп алыңыз. Бул көрсөтмөлөрдү аткарбоо электр тогуна урунууга, өрткө же мүлккө зыян келтирүүчү же жеке жаракатка алып келүүчү башка коркунучтарга алып келиши мүмкүн.

  • Электр коопсуздугу: Installation must be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved. Ensure power is turned off at the circuit breaker before installation or servicing.
  • Негиздөө: This fixture must be properly grounded to prevent potential electrical shock.
  • Зымдар: Use only UL-approved wire connectors. Ensure all connections are secure.
  • Монтаждоо: Mount the fixture securely to a suitable junction box or surface. Do not mount on unstable surfaces.
  • Жылуулук: The LED light heads can become hot during operation. Avoid touching them directly.
  • Көздү коргоо: Do not stare directly into the LED light source when illuminated, as it may cause eye damage.
  • Иштөө чөйрөсү: This product is designed for outdoor use and is IP65 rated for water resistance. However, avoid submerging it in water.

3. Орнотуу жана орнотуу

The iMaihom 130W LED Flood Light is designed for hardwired installation. Ensure you have a suitable junction box (minimum 4 inches / 10 cm diameter) and appropriate wiring before beginning.

Камтылган компоненттер:

  • iMaihom 130W LED Flood Light Fixture
  • Mounting Hardware (screws, anchors, wire nuts, safety cable)
  • Black Silicone Cap (for switch-controlled mode)

Орнотуу кадамдары:

  1. Кубатты өчүрүү: Before starting, ensure the power to the installation area is completely turned off at the circuit breaker.
  2. Монтаждоо бетин даярдоо: This light can be mounted to a junction box on a wall or under eaves/soffits. Ensure the surface is sturdy enough to support the fixture.
  3. Монтаждоо плитасын бекитүү: Secure the mounting plate to your existing junction box using the provided screws.
  4. Зым байланыштары: Арматуранын зымдарын үйүңүздүн зымдарына туташтырыңыз:
    • туташтыруу кара зым (Live) from the fixture to the кара зым туташтыргыч кутучасынан.
    • туташтыруу ак зым (Neutral) from the fixture to the ак зым туташтыргыч кутучасынан.
    • туташтыруу жашыл зым (Ground) from the fixture to the green or bare copper wire туташтыргыч кутучасынан.
    Use the provided wire nuts to secure all connections.
  5. Коопсуз арматура: Carefully tuck the wires into the junction box and attach the light fixture to the mounting plate, ensuring it is firmly secured.
  6. Жарык баштарын тууралоо: Loosen the adjustment screws on each light head to position them as desired. Tighten the screws once adjusted.
  7. Күчтү калыбына келтирүү: Электрди өчүргүчтөн кайра күйгүзүңүз.
Diagram showing hardwired installation steps for the iMaihom flood light.
Figure 3.1: Hardwired Easy Installation Diagram. Shows the three steps for connecting the light to a junction box.
Detailed wiring diagram for the iMaihom flood light showing neutral, earth, and live wire connections.
Figure 3.2: Easy Installation Wiring. Illustrates the connection of neutral, earth, and live wires.
Image showing the flood light installed under an eave and on a wall, demonstrating installation flexibility.
Figure 3.3: Eave and Wall Installation Examples. The light can be mounted under an eave or directly on a wall.

4. Иштөө нускамалары

The iMaihom 130W LED Flood Light offers two operating modes:

4.1. Dusk to Dawn Mode (Default)

This mode utilizes the built-in sensitive photocell sensor to automatically control the light. The light will turn on when ambient light levels drop at dusk and turn off when daylight returns at dawn. No manual intervention is required.

Image illustrating the Dusk to Dawn mode, showing the light automatically turning on at night and off during the day.
Figure 4.1: Dusk to Dawn Mode. The light automatically activates at dusk and deactivates at dawn.
Comparison image of a house with the flood light off during the day and on at night, demonstrating dusk to dawn functionality.
Figure 4.2: Automatic On/Off Function. The light is off during the day and on at night.

4.2. Switch Controlled Mode

To operate the flood light using a traditional wall switch, cover the photocell sensor with the provided black silicone cap. This will bypass the automatic dusk to dawn function, allowing you to manually turn the light on and off via your wall switch.

Diagram showing how to use the black cap to switch between dusk to dawn and switch-controlled modes, and troubleshooting flickering.
Figure 4.3: Mode Selection and Troubleshooting. Instructions for using the transparent and black caps for different operating modes.

4.3. Жарык баштарын жөндөө

The three light heads are independently adjustable. Loosen the screws at the base of each head, pivot them to your desired angle (up to 350° horizontally and 135° vertically for the center head, 90° for side heads), and then securely tighten the screws to lock them in place. This allows for wide and customizable light coverage.

Diagram showing hardwired installation steps for the iMaihom flood light.
Figure 4.4: Adjustable Design. Illustrates the range of motion for each light head.

5. Техникалык тейлөө

Regular maintenance ensures optimal performance and longevity of your iMaihom LED Flood Light.

  • Тазалоо: Periodically clean the light fixture and photocell sensor with a soft, damp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents. Ensure the photocell is clear for proper dusk to dawn operation.
  • Текшерүү: Annually inspect the wiring and connections for any signs of wear, damage, or corrosion. Ensure all mounting screws are tight.
  • Жылуулук таркатылышы: Ensure the fin-shaped aluminum housing remains clear of obstructions to allow for proper heat dissipation. This helps maintain the LED's lifespan.
  • Аба ырайын коргоо: While IP65 rated, extreme weather conditions may require additional checks. After heavy storms, inspect the fixture for any dislodged components or damage.
Жакын план view of the flood light's fin-shaped aluminum design for efficient heat dissipation.
Figure 5.1: Full Metal Design for Heat Dissipation. The fin design helps cool the LEDs.

6. Кыйынчылыктарды

If you encounter issues with your iMaihom LED Flood Light, refer to the following troubleshooting guide:

КөйгөйМүмкүн себепЧечим
Түнкүсүн жарык күйбөйт.1. Электр өчүк.
2. Photocell sensor is obstructed or faulty.
3. Зымдар маселеси.		1. Ажыраткычты жана дубалды өчүргүчтү текшериңиз.
2. Clean the photocell sensor. Ensure no external light source (e.g., street light, other fixtures) is shining directly on it. If using switch-controlled mode, ensure the black cap is correctly installed.
3. Verify all wiring connections are secure. Consult a qualified electrician if unsure.
Жарык күндүзү күйүп турат.1. Photocell sensor is obstructed or faulty.
2. Insufficient ambient light reaching the sensor.		1. Clean the photocell sensor. Ensure no debris is covering it. If using dusk-to-dawn mode, ensure the transparent cap is correctly installed.
2. Relocate the fixture to an area with more direct daylight, or ensure no overhangs are blocking light from the sensor.
Light flickers or cycles on/off rapidly.1. Photocell sensor interference.
2. Бошогон зымдар байланышы.
3. Кубаттын өзгөрүшү.		1. Ensure the photocell is not receiving intermittent light (e.g., from passing car headlights, reflections). If flickering persists, try replacing the transparent cap with the higher black cap, or add the EVA ring if included, as shown in Figure 4.3.
2. Check all wiring connections for tightness.
3. Consult an electrician to check for power supply issues.
Жарыктын чыгышы күңүрт.1. Dirt or debris on light heads.
2. Электр энергиясы менен камсыздоо маселеси.		1. Clean the surface of the LED light heads.
2. Verify the fixture is receiving adequate voltage.

If the problem persists after trying these solutions, please contact iMaihom customer support.

7. Техникалык шарттар

ӨзгөчөлүкСпецификация
БрендiMaihom
Модель номериBDD130D-3
Ватtage130 Ватт
Жарыктык13000 Lumens
Ачык түсКүндүзгү ак (6500K)
Power SourceAC (120 вольт)
МатериалАлюминий
Сууга туруктуулук деңгээлиIP65 суу өткөрбөйт
Башкаруу ыкмасыPhotocell (Dusk to Dawn) / Switch Controlled
Жарык булактарынын саны154 LED чиптери
Элементтин өлчөмдөрү (L x W x Y)15.78" x 6.18" x 4.64"
Элемент Салмагы2.4 фунт
Монтаж түрүWall Mount, Eave Mount, Soffit Mount, Ceiling Mount, Pole Mount
Dimensional drawing of the iMaihom 130W LED Flood Light with measurements in millimeters and inches.
Figure 7.1: Product Dimensions. Detailed measurements of the flood light fixture.

8. Кепилдик жана колдоо

iMaihom provides a manufacturer's warranty for this product. For specific details regarding the warranty period and coverage, please refer to the warranty card included with your purchase or contact iMaihom customer support directly.

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact iMaihom customer support through their official channels. Contact information can typically be found on the product packaging or the iMaihom brand webсайт.

Бул колдонмого киргизүү үчүн сатуучунун эч кандай расмий продукт видеолору жеткиликтүү эмес.

© 2024 iMaihom. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.