FLIPSKY Dual Electric Speed Controller FSESC6.7 User Manual

1. Киришүү

This manual provides essential information for the proper installation, operation, and maintenance of your FLIPSKY Dual Electric Speed Controller FSESC6.7. This controller is designed for electric skateboards, e-bikes, scooters, robots, and similar applications, offering precise motor control and robust protection features. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. Продукциянын өзгөчөлүктөрү

• Бир нече башкаруу режимдери: Supports Current, Dutycycle, Speed, and Position control modes for versatile application.
• Advanced Firmware: Utilizes the latest firmware version, offering rich control interface and sensor support.
• Balancing Car Functionality: Supports balancing car applications by connecting an IMU module via the IIC interface. Compatible IMU modules include MPU9250, MPU9150, MPU6050, LSM6DS3, and BMI160.
• Күчтү бекем башкаруу: Features a continuous current of 140A and an instantaneous current of 400A.
• Wide Voltage диапазону: Operates within a voltage range of 14V-60V (4-13S cells), safely supporting 4S to 12S battery configurations. Note: Voltage spikes must not exceed 60V.
• Компакт дизайн: Dimensions of 79.8mm x 66.8mm x 17.8mm make it suitable for various installations.

3. Техникалык шарттар

Note: It is recommended to keep firmware 5.2 from factory shipment. New firmware upgrades may potentially damage the ESC.

4. Орнотуу жана зымдар

Proper wiring is crucial for the safe and effective operation of the FLIPSKY Dual Electric Speed Controller. Refer to the diagrams below for connection details.

4.1-сүрөт: Жогорку view of the FLIPSKY Dual Electric Speed Controller FSESC6.7, showing the main board, capacitors, and connected motor and power wires. This image provides a general overview of the component layout.

4.2-сүрөт: Төмөнкү view of the FLIPSKY Dual Electric Speed Controller FSESC6.7, illustrating the integrated aluminum anodized heat sink designed for efficient thermal management.

4.3-сүрөт: Physical dimensions of the FLIPSKY Dual Electric Speed Controller FSESC6.7, indicating a length of 79.8mm, a width of 66.8mm, and a height of 17.8mm. These measurements are important for installation planning.

4.1. Байланыш бүттүview

The controller features various ports for power, motor connections, and communication with external devices. Ensure all connections are secure and correctly oriented.

4.4-сүрөт: Comprehensive wiring diagram illustrating the connection points for the battery, two motors, and a receiver. Numbered labels correspond to specific ports on the ESC.

4.5-сүрөт: Detailed pinout diagram for the various communication and sensor ports on the FSESC6.7. This includes pin assignments for SWD (1, 6), COMM (2, 7), CAN (3, 8), USB (4, 9), and SENSE (5, 10) interfaces.

4.2. Connection Points

• Батарея туташуу: Connect your battery pack (4-13S, 14V-60V) to the main power cables (14AWG with XT90 connector). Ensure correct polarity.
• Мотор байланыштары: Connect the two motors to the designated motor wire outputs (12AWG).
• Алуучу туташуусу: Connect your PPM receiver to the appropriate input port for control signals.
• USB порт: Use the USB port for configuration and firmware updates (if applicable).
• CAN автобус: For multi-ESC setups or communication with other CAN-enabled devices.
• UART, SPI, IIC: These ports support various sensors and communication protocols, including IMU modules for balancing applications.

5. Иштөө нускамалары

The FLIPSKY FSESC6.7 offers flexible control options and is programmable to suit various motor types and application requirements.

5.1. Башкаруу режимдери

The controller supports four primary control modes:

• Учурдагы башкаруу: Regulates the motor current.
• Dutycycle Control: Controls the motor speed based on the PWM duty cycle.
• Ылдамдыкты көзөмөлдөө: Maintains a desired motor RPM.
• Позицияны көзөмөлдөө: Controls the motor to a specific angular position.

5.2. Микропрограмма жана конфигурация

The ESC is programmable, allowing for customization of parameters. It is strongly recommended to maintain the factory-shipped firmware version 5.2. Upgrading to newer firmware versions carries a risk of damaging the ESC. Consult official FLIPSKY resources for any firmware-related guidance.

6. Техникалык тейлөө

To ensure the longevity and reliable performance of your FLIPSKY Dual Electric Speed Controller, follow these general maintenance guidelines:

• Таза жана кургак кармаңыз: Regularly inspect the ESC for dust, dirt, or moisture. Clean with a soft, dry brush or compressed air. Avoid exposure to water or high humidity.
• Байланыштарды текшерүү: Periodically check all wiring connections for looseness, corrosion, or damage. Secure any loose connections.
• Жылуулук башкаруу: Ensure adequate airflow around the heat sink, especially during operation. Avoid obstructing the heat sink.
• Физикалык зыянды болтурбоо: Protect the ESC from impacts or excessive vibrations.

7. Кыйынчылыктарды

The FLIPSKY FSESC6.7 incorporates several protection functions to safeguard the unit and connected components. Understanding these can help in diagnosing issues.

7.1. Коргоо функциялары

• Low Voltage Коргоо: Activates if the battery voltage drops below a safe threshold, preventing over-discharge.
• Жогорку Voltage Коргоо: Engages if the input voltage exceeds the maximum limit (60V), protecting against over-voltage.
• Ашыкча ток коргоо: Limits current flow to prevent damage from excessive load.
• Temperature Abnormality Protection: Monitors internal temperature and reduces power or shuts down if temperatures become critical.
• MOSFETs Over-Temperature Protection: Specifically protects the MOSFETs from overheating.

7.2. General Troubleshooting Steps

• Кубат жок: Check battery connections, battery charge level, and main power switch.
• Мотор жооп бербейт: Verify motor connections, sensor connections (if applicable), and receiver signal. Check ESC configuration for correct motor type and control mode.
• Үзгүлтүксүз иштөө: Inspect all wiring for loose connections or damage. Check for signs of overheating.
• Error Codes/LED Indicators: Refer to the FLIPSKY software documentation for specific error codes or LED blink patterns, if available.

8. Кепилдик маалыматы

The FLIPSKY Dual Electric Speed Controller FSESC6.7 comes with a warranty period of 2 months or more. Please retain your proof of purchase for warranty claims. The warranty typically covers manufacturing defects but may not cover damage resulting from improper installation, misuse, unauthorized modifications, or firmware upgrades not explicitly recommended by the manufacturer.

9. Колдоо

For technical assistance, product inquiries, or warranty support, please contact FLIPSKY customer service. Our support team is available to help resolve any issues you may encounter with your product.

Байланыш маалыматы: Please refer to the official FLIPSKY webакыркы байланыш маалыматы үчүн сайтка же сатып алуу документтериңизге кайрылыңыз.