Акча P110

Acmount P110 Car Jump Starter User Manual

Модел: P110

1. Киришүү

Thank you for choosing the Acmount P110 Car Jump Starter. This device is designed to provide a powerful and reliable solution for starting vehicles with dead batteries, as well as serving as a portable power bank and emergency light source. Please read this manual thoroughly before use to ensure safe and optimal operation.

Acmount P110 Car Jump Starter in use, showing 6000A peak current capability for various vehicles.

Image 1.1: The Acmount P110 Car Jump Starter demonstrating its 6000A peak current for starting vehicles up to 10.0L gas or 8.0L diesel engines.

2. Коопсуздук маалыматы

Түзмөккө же унаага жаракат алуунун же бузулуунун алдын алуу үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:

  • Тоңуп калган батареяны секирип баштоого аракет кылбаңыз.
  • Туура полярдуулукту камсыз кылыңыз (кызыл түстөгүamp оң, кара клamp to negative) to avoid sparks and damage.
  • Оң жана терс кл байланыштырбаampбирге.
  • Аппаратты балдардан алыс кармаңыз.
  • Аппаратты экстремалдык температурага же нымдуулукка дуушар кылбаңыз.
  • If the device becomes excessively hot during use, discontinue operation immediately.
  • Өзгөчө секирип баштоо процедуралары үчүн унааңыздын ээсинин нускамасынан караңыз.
Acmount P110 Car Jump Starter highlighting 10 protection technologies including spark-proof, reverse-polarity, and over-charge protection.

Image 2.1: The Acmount P110 features 10 protection technologies for safe operation, including spark-proof, reverse-charge, high/low-temp, over-charge, short-circuit, reverse-polarity, AI-software monitoring, over-current, over-voltage, жана ашыкча жүк коргоо.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

  • Acmount P110 Jump Starter
  • Smart Jump Cables (with integrated battery and intelligent clamps)
  • USB Type-C кубаттоочу кабель
  • Сактоочу куту
  • User Manual
Contents of the Acmount P110 Car Jump Starter package, including the jump starter unit, smart jump cables, USB-C charging cable, storage case, and user manual.

Image 3.1: All components included in the Acmount P110 Car Jump Starter package.

4. Продукттун өзгөчөлүктөрү жана компоненттери

Familiarize yourself with the main parts of your Acmount P110 Jump Starter:

Diagram of Acmount P110 Car Jump Starter components, including Jump Start Output, Compass, Power Button, Indication Display, LED Light (Torch/Strobe/SOS), and USB-C input/output ports.

Image 4.1: Key components of the Acmount P110 Jump Starter.

  • Jump Start чыгаруусу: Port for connecting the smart jump cables.
  • Компас: Integrated for navigation assistance.
  • Кубат баскычы: Activates the device and controls LED light modes.
  • Indication Display: Батареянын деңгээлин жана чыгуу абалын көрсөтөт.
  • LED жарык: Functions as a flashlight, strobe, and SOS signal.
  • USB-C Киргизүү/Чыгуу: For charging the jump starter and charging external devices.
  • USB 3.0 Outputs: Dual ports (5V/3A, 9V/2A, 15V/1.5A) for charging smartphones and other USB devices.

5. Орнотуу

5.1 Стартерди кубаттоо

Before initial use, fully charge the Acmount P110 Jump Starter. It is recommended to charge the device every 2-3 months to maintain battery health, even when not in use.

  1. Connect the provided USB Type-C charging cable to the jump starter's USB-C port.
  2. Connect the other end of the USB Type-C cable to a suitable USB wall adapter (not included) or car charger.
  3. The indication display will show the charging progress. The device is fully charged when the display indicates 100%.

Note: Do not charge the starter immediately after a jump-starting operation. Allow the starter to cool down first.

6. Иштөө нускамалары

6.1 Унаанын секирип от алдыруу

Унааңызды коопсуз от алдыруу үчүн төмөнкү кадамдарды аткарыңыз:

  1. Унааны даярдоо: Унаанын от алдыруу системасы өчүрүлгөнүнө жана кол тормозу иштеп турганына ынаныңыз.
  2. Connect the Smart Jump Cables: Insert the blue end of the smart jump cable into the jump start output port on the Acmount P110. Ensure a firm connection.
  3. ClampБатареяга:
    • туташтыруу кызыл оң (+) clamp унаанын оң (+) батарея терминалына туташтырыңыз.
    • туташтыруу кара терс (-) clamp унаанын терс (-) батарея терминалына туташтырыңыз.

    Эскертүү: кызыл жана кара cl тийбегилеamps together once connected to the jump starter.

  4. Текшерүү көрсөткүчү: The smart jump cable's indicator light will show its status. A solid green light indicates a safe connection and readiness to jump start. If any other light or sound occurs, refer to the troubleshooting section.
  5. Унааны баштоо: Once the indicator is green, start your vehicle's engine.
  6. Clamps: After the engine starts, immediately remove the smart jump cables in reverse order: first the black negative (-) clamp, then the red positive (+) clamp.
  7. Disconnect from Jump Starter: Disconnect the smart jump cable from the Acmount P110.
Three-step diagram showing how to jump start a vehicle: 1. Insert the jumper cable into the booster. 2. Connect the clamps to your car battery. 3. Start your car engine.

Image 6.1: Visual guide for jump starting your vehicle.

6.2 Электрондук түзмөктөрдү кубаттоо

The Acmount P110 can also function as a portable power bank for your electronic devices.

  1. Connect your device's USB charging cable to one of the USB output ports (USB 3.0 or USB-C) on the Acmount P110.
  2. The jump starter will automatically begin charging your device. The indication display will show the output status.
  3. Кубаттоо аяктагандан кийин түзмөгүңүздү ажыратыңыз.
Acmount P110 Car Jump Starter being used as a portable power bank, showing its capacity to charge multiple devices like iPhones, iPads, Kindles, and smartwatches.

Image 6.2: The Acmount P110 as a portable power supply for various electronic devices.

6.3 LED фонарьды колдонуу

The integrated LED flashlight has three modes: Flashlight, Strobe, and SOS.

  1. Кол чыракты күйгүзүү үчүн: Кубат баскычын көпкө басып туруңуз.
  2. To cycle through modes (Strobe, SOS): Short press the power button while the flashlight is on.
  3. To turn off the flashlight: Long press the power button again.
Acmount P110 Car Jump Starter demonstrating its LED flashlight with three modes: Flashlight (long press), SOS (short press), and Strobe (short press).

Image 6.3: Instructions for operating the LED flashlight modes.

7. Техникалык тейлөө

Proper maintenance ensures the longevity and reliability of your Acmount P110 Jump Starter:

  • Кадимки заряддоо: It is recommended to charge the jump starter every 2-3 months to keep the battery in a healthy state, even if not used. This helps prevent deep discharge and extends battery life.
  • Сактагыч: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. The device can hold power for about 12 months when not in use.
  • Тазалоо: Аппаратты жумшак, кургак чүпүрөк менен сүртүңүз. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.
  • Температура диапазону: The device is designed to work in extreme environments, from -4°F (-20°C) to +140°F (+60°C).
Acmount P110 Car Jump Starter showing a 24-month standby time compared to 6-18 months for other devices, emphasizing long battery life.

Image 7.1: The Acmount P110 offers extended standby time, requiring less frequent charging.

8. Кыйынчылыктарды

If you encounter issues with your Acmount P110 Jump Starter, refer to the following common problems and solutions:

КөйгөйМүмкүн себепЧечим
Унаа башталбайтLow charge on jump starter, incorrect clamp connection, severely discharged vehicle battery, vehicle issue.Ensure jump starter is fully charged. Verify clamps are connected correctly (red to +, black to -). Try jump starting again after 30 seconds. If the vehicle still doesn't start, there might be another issue with the vehicle.
Smart clamp indicator light is not greenIncorrect connection, short circuit, reverse polarity, or other safety protection activated.Ажыратуу clamps from both the jump starter and the vehicle battery. Re-read safety instructions and reconnect carefully, ensuring correct polarity. If the issue persists, the vehicle battery might be faulty.
Стартер заряддалбай жататБузук кубаттоочу кабель, адаптер же порт.Try a different USB-C cable and wall adapter. Ensure the cable is fully inserted into the jump starter's USB-C port.
Jump starter gets hot during useNormal operation under heavy load, or potential overload.A slight warmth is normal. If it becomes excessively hot, disconnect immediately and allow it to cool down. Ensure the vehicle's engine size is within the jump starter's specifications.

Бул чечимдерди колдонуп көргөндөн кийин көйгөй чечилбесе, кардарларды колдоо менен байланышыңыз.

9. Техникалык шарттар

ӨзгөчөлүкСпецификация
БрендАкча
Модель номериP110
Чыгуу токунун чокусу6000 Amps
Батарея сыйымдуулугу20000 миллионamp Саат
Батарея клеткасынын курамыЛитий ион
Тtage14.8 вольт
Мотор шайкештиги10.0 литрге чейин газ же 8.0 литр дизелдик кыймылдаткыч
Продукциянын өлчөмдөрү (D x W x Y)4"D x 5"W x 9"H
Элемент Салмагы1 килограмм
USB чыгаруу 15V/3A
USB чыгаруу 29V/2A
USB чыгаруу 315V/1.5A
LED чырак режимдериFlashlight, Strobe, SOS
Иштөө температурасы-4°F (-20°C) менен +140°F (+60°C)

10. Кепилдик жана колдоо

The Acmount P110 Car Jump Starter comes with a 12 айлык кепилдик. Acmount also provides lifetime reliable technical support.

If you have any questions, concerns, or require assistance with your product, please contact our professional after-sales team. We are committed to providing a satisfactory solution.

For support, please refer to the contact information provided on the Acmount official webсайт же сатып алуу документтери.

© 2026 Acmount. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.