1. Киришүү
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your VONROC Hydrophore Water Pump Set, Model GP500. This powerful 1000W pump with a 19L stainless steel tank is designed for various water supply applications, including garden irrigation, domestic water supply, and drawing water from wells or ponds. Please read these instructions carefully before using the product and keep them for future reference.
2. Коопсуздук нускамалары
Always observe the following safety precautions to prevent electric shock, injury, or damage to the pump.
- Колдонмону окуу: Иштетүүдөн мурун, ушул колдонмодогу бардык көрсөтмөлөрдү кылдат окуп чыгып, түшүнүңүз.
- Электр коопсуздугу: Ensure the power supply matches the pump's specifications (230V). Always connect the pump to a properly grounded outlet. Do not operate the pump with damaged cables or plugs.
- Суунун температурасы: Do not pump liquids hotter than 35°C (95°F).
- үшүктөн коргоо: Protect the pump from frost. Drain all water from the pump and hoses during winter or when temperatures drop below freezing.
- Жайгашкан жери: Install the pump on a stable, level surface, protected from direct weather exposure.
- Көзөмөл: Иштеп жаткан учурда насосту кароосуз калтырбаңыз.
- Тейлөө: Кандайдыр бир тейлөө же тазалоо иштерин жүргүзүүдөн мурун электр менен жабдууну өчүрүңүз.
- Балдар жана үй жаныбарлары: Балдарды жана үй жаныбарларын иштеп жаткан соргучтан алыс кармаңыз.
3. Продукт бүтүп калдыview
3.1 Компоненттер
The VONROC Hydrophore Water Pump Set consists of the following main components:
- Насос блогу: The electric motor and pump housing, providing 1000W of power.
- Басым багы: A 19-liter stainless steel tank that maintains water pressure and reduces pump cycling.
- басым которуштуруу: Automatically starts and stops the pump based on water pressure.
- Басым өлчөгүч: Displays the current system pressure.
- Suction Connection: G1 female threaded inlet for connecting the suction hose.
- басым туташуу: G1 female threaded outlet for connecting the discharge hose.
- Дренаждык сайгыч: For easy draining of water from the pump.
Figure 1: ашыкview of the VONROC Hydrophore Water Pump Set.
3.2 Техникалык мүнөздөмөлөр
| Бренд | ВОНРОК |
| Модель номери | GP500 |
| Күч | 1000 Вт |
| Максималдуу агым ылдамдыгы | саатына 3500 литр |
| Макс басым | 4.4 бар |
| Соруунун максималдуу бийиктиги | 8 метр |
| Максималдуу жеткирүү башчысы | 44 метр |
| Танк көлөмү | 19 литр |
| Тtage | 230 вольт |
| Коргоо классы | IPX4 (чачууга каршы) |
| Продукциянын өлчөмдөрү (L x W x Y) | 45L x 27W x 47.5H см |
| Материал | Stainless Steel (Pump and Tank) |
Figure 2: Product dimensions of the pump set.
4. Орнотуу
4.1 Орнотуу
- Place the pump on a firm, level, and stable surface to prevent vibrations and ensure proper operation.
- Ensure the pump is protected from rain, direct sunlight, and extreme temperatures.
- Maintain adequate ventilation around the pump motor.
4.2 Шлангдарды туташтыруу
- Соруу линиясы: Connect a robust, vacuum-resistant suction hose (minimum 1 inch diameter) to the pump's suction inlet (G1 female thread). Ensure all connections are airtight to prevent air ingress, which can impair pump performance. It is highly recommended to install a non-return valve at the end of the suction hose to prevent water from flowing back.
- Басым сызыгы: Connect the discharge hose (G1 female thread) to the pump's pressure outlet. This hose will lead to your irrigation system, tap, or other water consumption points.
Figure 3: Suction and pressure connections.
4.3 Насосту толтуруу
Before initial use or after the pump has run dry, it is crucial to prime the pump:
- Ensure the suction hose is fully submerged in the water source.
- Open the priming port (usually a screw on top of the pump housing) and slowly fill the pump housing with water until it overflows.
- Праймер портун бекем жабыңыз.
- Open any taps or valves in the pressure line to allow air to escape during startup.
5. Иштөө нускамалары
5.1 Насосту ишке киргизүү
- After priming, plug the pump into a suitable electrical outlet.
- Switch on the pump. The pump will start to draw water and build pressure.
- Once the pressure reaches the set cut-off point (visible on the pressure gauge), the pump will automatically switch off.
- When water is drawn (e.g., by opening a tap), the pressure will drop, and the pressure switch will automatically restart the pump.
Figure 4: Pump in operation, delivering water.
5.2 Басымды көзөмөлдөө
The integrated pressure gauge allows you to monitor the system pressure. The pump is designed to operate within a specific pressure range, automatically switching on and off to maintain consistent water supply.
Figure 5: Pressure gauge displaying system pressure.
5.3 Өчүрүү
To turn off the pump, simply switch it off at the power switch and disconnect it from the electrical outlet.
6. Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө насосуңуздун узак мөөнөттүү иштешин жана оптималдуу иштешин камсыздайт. Ар кандай техникалык тейлөөдөн мурун насосту ар дайым электр булагынан ажыратыңыз.
- Байланыштарды текшерүү: Periodically inspect all hose connections for leaks and ensure they are tight.
- Таза чыпка: If a pre-filter is installed on the suction line, clean it regularly to prevent blockages.
- Насос корпусу: Keep the pump housing clean and free from dirt and debris.
- Кыштоо: Before the first frost, completely drain all water from the pump and hoses using the drain plug. Store the pump in a dry, frost-free location. Failure to do so will void the warranty.
7. Кыйынчылыктарды
Жалпы маселелер жана аларды чечүү үчүн төмөнкү таблицага кайрылыңыз.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Насос иштебейт. | No power supply; thermal overload protection activated; motor fault. | Check power connection; allow pump to cool down; contact service. |
| Насос иштейт, бирок суу берилбейт. | Pump not primed; air in suction line; suction hose blocked or leaking; water source empty. | Prime the pump; check suction line for leaks/blockages; ensure water source is adequate. |
| Төмөн басым же үзгүлтүктүү агым. | Air in system; partial blockage; worn pump components; pressure switch setting. | Check for air leaks; clean filters; contact service; adjust pressure switch (if applicable and knowledgeable). |
| Насос үзгүлтүксүз иштейт. | Leak in pressure system; pressure switch faulty; tank pre-charge pressure too low. | Check for leaks in pipes/fittings; contact service; check tank pre-charge pressure (refer to specific tank instructions). |
The pump is equipped with thermal protection to prevent overheating. If the pump stops unexpectedly, allow it to cool down before attempting to restart.
8. Сактоо
When storing the pump for extended periods, especially during winter:
- Completely drain all water from the pump, tank, and connected hoses.
- Clean the exterior of the pump.
- Store the pump in a dry, frost-free, and well-ventilated area, away from direct sunlight and corrosive substances.
9. Кепилдик жана колдоо
VONROC products are designed and manufactured to high-quality standards. This product comes with a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official VONROC webсайт.
For technical support, spare parts, or service inquiries, please contact VONROC customer service through their official channels. Always have your model number (GP500) and purchase date available when contacting support.