Jambo KL-217

Jambo 16-inch Liquid Motion Lamp (Model KL-217) User Manual

Модели: KL-217

Introduction

Thank you for choosing the Jambo 16-inch Liquid Motion Lamp. This manual provides essential information for the safe and proper use, setup, operation, and maintenance of your lamp. Сураныч, колдонуудан мурун аны жакшылап окуп чыгыңыз жана келечекте маалымат үчүн сактап коюңуз.

Jambo 16-inch Liquid Motion Lamp with blue base and cap, purple liquid, and orange wax.
Jambo 16-inch Liquid Motion Lamp with blue base and cap, purple liquid, and orange wax.

The Jambo Liquid Motion Lamp creates a mesmerizing visual display as heated wax slowly rises and falls within a liquid-filled glass vessel. This dynamic effect provides a calming and decorative ambiance for any indoor space.

Коопсуздук маалыматы

Коопсуз эксплуатацияны камсыз кылуу жана зыян келтирбөө үчүн төмөнкү коопсуздук чараларын сактаңыз:

  • Үй ичинде гана колдонуу: Бул лamp is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
  • Электр коопсуздугу: l камсыз кылууamp is connected to a 120-volt power outlet. Do not overload electrical outlets.
  • Жылуулук жөнүндө эскертүү: лamp and its contents become hot during operation. Do not touch the glass or base while the lamp is on or immediately after turning it off. Allow sufficient time for cooling.
  • Туруктуу жайгаштыруу: l коюңузamp on a flat, stable, and heat-resistant surface away from edges where it could be easily knocked over.
  • Avoid Shaking: Do not shake, drop, or move the lamp while it is operating or hot, as this can damage the internal components and cause the liquid to become cloudy.
  • Балдардан жана үй жаныбарларынан алыс болуңуз: Due to the heat generated, keep the lamp балдар жана үй жаныбарлары жетпеген жерде.
  • Вентиляция: л айланасында адекваттуу аба айлануусун камсыз кылууamp to prevent overheating. Do not cover the lamp.
  • Бузулган шнур: Электр зымы бузулган болсо, коркунучтарды болтурбоо үчүн аны өндүрүүчү же квалификациялуу тейлөө агенти алмаштырышы керек.

Пакеттин мазмуну

Таңгактан чыгарууда бардык компоненттер бар экенин текшериңиз:

  • 1 x Jambo Liquid Motion Lamp Unit (Base, Glass Vessel, Cap)
  • 1 x 30-Watt Incandescent Bulb (E17 base)
Diagram showing the components of the Jambo Liquid Motion Lamp: liquid lamp, 30-watt bulb, standard plug, high-quality durable glass, and sleek blue base and cap.
Components of the Jambo Liquid Motion Lamp, including the glass vessel, base, cap, and bulb.

Жайгашуу

Follow these steps to set up your Jambo Liquid Motion Lamp:

  1. Таңылганын ачуу: Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
  2. Лампаны орнотуу: If the bulb is not pre-installed, gently screw the included 30-watt E17 incandescent bulb into the socket located in the lamp base. Do not overtighten.
  3. Place Glass Vessel: Carefully place the glass vessel onto the lamp base, ensuring it sits securely.
  4. Капкакты бекитүү: Place the decorative cap onto the top of the glass vessel.
  5. Позициясы Лamp: Чогултулган лamp on a flat, stable, and heat-resistant surface, away from direct sunlight, extreme temperatures, or drafts.
  6. Туташуу кубаты: Электр шнурын стандарттуу 120 вольттук электр розеткасына сайыңыз.
Image illustrating the simplicity of setting up the Jambo Liquid Motion Lamp, emphasizing 'Ready to Use' by just plugging it in.
The Jambo Liquid Motion Lamp is ready for use after simple assembly and plugging into a power source.

Иштөө нускамалары

Operating your Jambo Liquid Motion Lamp түз:

  1. Күйгүзүү: Locate the rotary switch on the power cord or base (depending on model) and turn it to the 'ON' position. The bulb will illuminate.
  2. Жылытуу убактысы: For the first use, or after extended periods of inactivity, the lamp may take 2-4 hours to fully warm up and for the wax to begin flowing smoothly. This is normal.
  3. Wax Movement: Once warmed, the wax will begin to soften, rise, and fall in captivating patterns. The lamp operates best at room temperature (20-25°C / 68-77°F).
  4. Иштөө узактыгы: For optimal performance and longevity, it is recommended to operate the lamp for no more than 8-10 hours at a time. Allow it to cool down completely before restarting.
  5. Өчүрүү: l өчүрүү үчүнamp, rotate the switch to the 'OFF' position and unplug it from the power outlet when not in use for extended periods.
The Jambo Liquid Motion Lamp illuminated in a bedroom setting, casting a soft glow.
The Jambo Liquid Motion Lamp creating a calming ambiance in a room.
The Jambo Liquid Motion Lamp displayed on a side table in a modern living room, adding a decorative accent.
The Jambo Liquid Motion Lamp as a decorative accent in a modern living space.

Техникалык тейлөө

Туура кам көрүү сиздин л узак өмүрүн жана аткарууну камсыз кылатamp:

  • Тазалоо: l камсыз кылууamp is unplugged and completely cool before cleaning. Wipe the exterior of the glass and base with a soft, damp кездеме. Абразивдүү тазалоочу каражаттарды колдонбоңуз же лампанын эч бир бөлүгүн сууга салбаңыз.amp сууда.
  • Лампаны алмаштыруу: If the bulb burns out, unplug the lamp and allow it to cool. Carefully remove the old bulb and replace it with a new 30-watt, E17 base incandescent bulb. Ensure the replacement bulb matches the original specifications.
  • Сактагыч: Эгерде лamp for an extended period, ensure it is clean, dry, and stored upright in a cool, dark place.
  • Ачпа: Never attempt to open the sealed glass vessel or tamper with its contents. This will void any warranty and can be dangerous.

Проблемаларды чечүү

If you encounter issues with your Jambo Liquid Motion Lamp, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз:

КөйгөйМүмкүн себепЧечим
Lamp күйбөйт.No power, faulty bulb, or loose connection.l экендигин текшериңизamp is properly plugged in. Ensure the power outlet is functional. Verify the rotary switch is in the 'ON' position. Replace the bulb if it is burnt out.
Wax is not moving or moving slowly.Insufficient warm-up time, cold room temperature, or incorrect bulb wattage.Allow 2-4 hours for the lamp to fully warm up. Ensure the room temperature is between 20-25°C (68-77°F). Confirm the bulb is a 30-watt E17 incandescent type.
Liquid is cloudy.Initial cloudiness, lamp shaken, or improper storage.Initial cloudiness often clears after several hours of continuous operation. Avoid shaking or dropping the lamp. If cloudiness persists after multiple uses, contact customer support.
Wax is stuck at the top or bottom.Not fully warmed up, lamp tilted, or excessive heat/cold.l камсыз кылууamp has had sufficient warm-up time. Verify the lamp is placed on a level surface. Avoid placing the lamp near heat sources or in very cold areas.

Техникалык шарттар

Key technical specifications for the Jambo 16-inch Liquid Motion Lamp (Model KL-217):

ӨзгөчөлүкДеталь
Модель номериКЛ-217
Өлчөмдөр (D x W x H)11.4 см x 11.4 см x 39.4 см (болжол менен 4.5 x 4.5 x 15.5 дюйм)
Shade Height16 дюйм
Power SourceЭлектр зымдары
Тtage120 вольт
Ватtage30 Ватт
Лампанын түрүЖылытуу
Лампанын базасыE17
Которуу түрүРотари
Негизги материалАлюминий
Көлөкө материалыАйнек
Аяктоо түрүMetallic
Ички/тышкы колдонууIndoor
Сууга туруктуулук деңгээлиСуу өткөрбөйт
UPC850019692297

Кепилдик жана колдоо

Jambo is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding parts and service, please contact Jambo customer support through the retailer where you purchased the product or visit the official Jambo webбайланыш маалыматы үчүн сайт.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.