Cxy T18

Cxy T18 Jump Starter Power Bank User Manual

Model: T18 | Brand: Cxy

Introduction

The Cxy T18 Jump Starter Power Bank is a versatile device designed to provide emergency jump-starting for 12V vehicles, including cars, motorcycles, boats, and more, with up to 6L gas or 3.0L diesel engines. It also functions as a portable power bank for charging electronic devices and features an integrated LED flashlight for various lighting needs.

Пакеттин мазмуну

Сураныч, кутудан чыгарганда пакеттин мазмунун текшерип, бардык буюмдар бар экенин текшериңиз:

  • Cxy T18 Jump Starter Power Bank
  • 12V Smart Battery Clamp
  • USB-C Cable
  • C кабели
  • User Manual
Cxy T18 Jump Starter Package Contents
Image: Contents of the Cxy T18 Jump Starter package, including the jump starter unit, smart battery clamps, USB cables, and user manual.

Техникалык шарттар

ӨзгөчөлүкСпецификация
Жогорку ток1000 Amps
Батарея сыйымдуулугу12800mAh
Унаа шайкештиги12V vehicles (up to 6L Gas / 3.0L Diesel engines)
Бир зарядка секирип баштооUp to 25 times (when fully charged)
ДисплейDigital LED Screen (3-inch)
USB чыгаруу 1Quick Charge (18W)
USB чыгаруу 2Стандарттык USB чыгышы
LED жарык режимдериSOS, Spotlight, Strobe
Өлчөмдөр22 x 9 x 5 см
Салмагы1.36 килограмм

Коопсуздук маалыматы

Always observe the following safety precautions when using the Cxy T18 Jump Starter:

  • Read the entire user manual before first use.
  • Колдонуудан мурун секирүү стартер толук заряддалганын текшериңиз.
  • Do not attempt to jump start vehicles with voltag12Vдан башка.
  • cl туташтырууamps correctly: Red to positive (+), Black to negative (-). Incorrect connection can cause damage.
  • Кызыл жана кара кл тийбегилеampбирге.
  • Балдар жетпеген жерде сактаңыз.
  • Аппаратты экстремалдык температурага, түз күндүн нуруна же сууга калтырбаңыз.
  • If the device becomes excessively hot during use, disconnect it immediately.
  • Акылдуу батареяны бекитүүamp includes over 10 types of protection, including reverse polarity, spark-proof, overcharge, high/low temperature, over-voltage, overload, over-current, and short circuit protection.
Smart Clamps Protections
Image: Diagram illustrating the various safety protections integrated into the smart battery clamps, such as reverse polarity, spark-proof, and overcharge protection.

Орнотуу жана заряддоо

Баштапкы заряддоо

Before first use, fully charge the Cxy T18 Jump Starter. Use the provided USB-C cable to connect the jump starter to a USB power adapter (not included). The digital LED screen will display the charging status and battery percentage. Charging is complete when the screen shows 100%.

Санариптик дисплейди түшүнүү

The 3-inch digital LED screen provides real-time information:

  • Батарея деңгээли: Калган батареянын пайызын көрсөтөтtage.
  • Output Discharge (OUT): Indicates when the device is discharging power.
  • Input Charge (IN): Indicates when the device is being charged.
  • ДАЯР: Appears when the device is ready to jump start a vehicle.
  • Эскертүү белгилери:
    • Ашыкча жылуулук
    • Батарея аз
    • Clamps Reversely (Incorrect connection)
Comprehensive Digital Display
Image: Close-up of the Cxy T18's digital display, showing battery level, charge/discharge indicators, "READY" status, and various warning icons.

Колдонуу боюнча нускамалар: Унааны от алдыруу

Унааңызды коопсуз от алдыруу үчүн төмөнкү кадамдарды аткарыңыз:

  1. Cl туташууamp to the Jump Starter: Акылдуу батареяны салыңыз clamp cable into the "Car Jump Start Output" port on the jump starter. Ensure it is firmly connected. The display should show "READY".

    Connect Clamp to Jump Starter
    Image: Step 1 - Connecting the smart battery clamp to the jump starter unit.
  2. Cl туташууamp to the Car Battery:

    • тиркөө КЫЗЫЛ (+) clamp унааңыздын аккумуляторунун оң терминалына.
    • тиркөө КАРА (-) clamp унааңыздын аккумуляторунун терс терминалына.
    Ensure a secure connection. The jump starter's display should indicate "READY" if connections are correct and safe. If any error icons appear, check connections and battery status.

    Connect Clamps to Car Battery
    Image: The Cxy T18 Jump Starter connected to a car battery, showing the correct positive (red) and negative (black) clamp байланыштар.
  3. Start Your Engine: Once the jump starter shows "READY", return to your vehicle and attempt to start the engine. If the engine does not start on the first attempt, wait at least 30 seconds before trying again.

    Engine Start
    Image: Step 3 - A hand pressing the engine start button in a vehicle after connecting the jump starter.
  4. Remove and Go: Кыймылдаткыч иштетилгенден кийин, кара (-) клапанды дароо ажыратыңызamp from the car battery, then disconnect the red (+) clamp. Finally, remove the smart battery clamp cable from the jump starter. Store the jump starter in a safe place.

    Clamps
    Image: Step 4 - A hand removing the battery clamps from the car battery after a successful jump start.
Jump Starter кантип колдонсо болот
Image: A visual guide demonstrating the four steps to use the Cxy T18 Jump Starter: connect to jump starter, connect to car battery, start engine, and remove clamps.

Multifunction Features

Power Bank функциясы

The Cxy T18 can charge your electronic devices. It features two USB-A output ports: one Quick Charge (18W) and one standard USB output. Simply connect your smartphone, tablet, or other USB-powered devices using their respective USB cables.

Power Bank функциясы
Image: The Cxy T18 Jump Starter being used to charge a smartphone via its USB output ports.

LED фонарик

The integrated LED flashlight offers three modes for various situations:

  • Көңүл бурчу: Жалпы жарыктандыруу үчүн.
  • SOS режими: Өзгөчө кырдаалдарда Морзе коду боюнча SOS сигналын чыгарат.
  • Strobe режими: Provides a flashing light for signaling or warning.

To activate the flashlight, press the dedicated LED Light button. Press again to cycle through modes.

LED чырак режимдери
Image: The Cxy T18 Jump Starter with its LED flashlight activated, demonstrating its use for emergency lighting, night walking, and rescue lighting.

Техникалык тейлөө

  • Сактагыч: Секирүү стартерди күн тийбеген жана нымдуулуктан алыс салкын, кургак жерде сактаңыз.
  • Заряддоо: For optimal battery life, recharge the unit every 3-6 months, even if not used, to maintain its charge level.
  • Тазалоо: Аппаратты жумшак, кургак чүпүрөк менен сүртүңүз. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.
  • Clamp Кам көрүү: After each use, inspect the clamps for any damage or corrosion. Clean them if necessary.

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Түзмөк күйбөй жатат.Батарея толугу менен түгөнүп калган.Аппаратты толук заряддаңыз.
"Clamps Reversely" warning on display.Clampтуура эмес батарея терминалдарына туташтырылган.Ажыратуу clamps and re-connect Red to positive (+), Black to negative (-).
Секирүүгө аракет кылгандан кийин унаа от албайт.Jump starter battery low; vehicle battery severely discharged; other vehicle issues.Ensure jump starter is fully charged. Wait 30 seconds and try again. If still no start, consult a mechanic.
"Over Heat" warning.Device has overheated due to prolonged use or high ambient temperature.Disconnect the device and allow it to cool down before attempting further use.
USB кубаттоо иштебей жатат.Device battery low; incorrect cable; device not activated for charging.Check battery level. Ensure cable is properly connected. Some devices may require pressing the power button to initiate USB output.
What if the Car Flameout?
Image: Scenarios where the Cxy T18 Jump Starter can be useful, such as a car laid idle for a long time, battery aging, or voltage insufficient, preventing the need to push the car or borrow power.

Кепилдик жана колдоо

Cxy offers a 24-month warranty and lifetime expert technical support for the T18 Jump Starter Power Bank. For any issues or inquiries, please contact Cxy customer service.

Please refer to the contact information provided in your product packaging or visit the official Cxy webколдоо үчүн сайт.

© 2024 Cxy. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.