Радиалдык кайраamp HP пассивдүү кайраampТүзмөктүн колдонуучу колдонмосун

Introduction

Image: The Radial Reamp HP пассивдүү кайраamping Device, a compact black box with white lettering for "Reamp HP Studio Reamper" and "Radial Engineering" logo. It features input and output jacks, a level knob, and switches for mono and ground lift.

Радиалдык Реamp HP is a flexible, passive reamping device designed to convert a line-level signal from a headphone output into an instrument-level signal suitable for reamping through guitar amplifiers, pedals, or other instrument-level equipment. This device allows engineers and musicians to re-record tracks through different setups without needing to re-perform the original part, offering creative flexibility and time-saving benefits in the studio.

It features inputs for both 1/4-inch and 3.5mm plugs, making it compatible with a wide range of audio interfaces, smartphones, and tablets. The built-in isolation transformer and ground lift switch help eliminate noise and hum, ensuring a clean signal path.

Өзгөчөлүктөрү

Passive ReampТүзмөк: Converts line-level signals to instrument-level without requiring external power.
1/4" and 3.5mm Inputs: Versatile connectivity for audio interfaces, smartphones, and tablets.
Isolation Transformer: Helps eliminate ground loops and noise.
Жер көтөргүчтү которгуч: Further reduces hum and buzz from ground loop issues.
Моно которуу: Allows summing stereo headphone outputs to a mono signal for reamping.
Деңгээлди көзөмөлдөө: Adjustable output level to fine-tune the signal sent to the amplifier or pedal.

Жайгашуу

Before connecting the Reamp HP, ensure all audio equipment is powered off to prevent potential damage from sudden signal spikes.

Аудио интерфейсине туташуу

Connect the headphone output of your audio interface to the 1/4" INPUT or 3.5mm MINI IN jack on the Reamp HP. Use the appropriate cable (TRS 1/4" or 3.5mm stereo cable).
Connect the OUTPUT of the Reamp HP to the input of your guitar amplifier, effects pedal chain, or instrument-level input on another device using a standard 1/4" TS instrument cable.
If your audio interface's headphone output is stereo and you wish to reamp a mono signal, engage the MONO switch on the Reamp HP. This sums the stereo signal to mono.
Adjust the LEVEL knob on the Reamp HP to control the signal strength sent to your amplifier or pedals. Start with the knob fully counter-clockwise and slowly increase it.
If you experience hum or buzz, try engaging the LIFT switch. This disconnects the ground connection between the Reamp HP and the connected equipment, often resolving ground loop issues.

Радиалдык кайраamp HP connected to an audio interface and guitar ampөмүрлүү

Image: The Radial Reamp HP connected to a red audio interface, with a cable running from the Reamp HP's output to a guitar amplifier. This illustrates a typical reampорнотуу.

Diagram showing Radial Reamp HP connection with audio interface, monitors, and ampөмүрлүү

Image: A block diagram illustrating the signal flow for reamping. An audio interface connects to studio monitors and a laptop. The headphone output of the interface connects to the Reamp HP. The Reamp HP's output goes through a pedalboard to a guitar amplifier, which is then miked and returned to the audio interface. This visualizes the complete reamping chain.

Смартфонго же планшетке туташуу

Connect the headphone output of your smartphone or tablet to the 3.5mm MINI IN jack on the Reamp HP using a standard 3.5mm stereo cable.
Connect the OUTPUT of the Reamp HP to the input of your guitar amplifier or effects pedal chain.
Engage the MONO switch if you are reamping a mono signal from a stereo source.
Adjust the LEVEL knob on the Reamp HP and the volume on your smartphone/tablet to achieve the desired signal level.
Use the LIFT switch if ground hum is present.

Diagram showing Radial Reamp HP connection with tablet and ampөмүрлүү

Image: A block diagram showing a tablet connected to the Reamp HP via its headphone output. The Reamp HP's output then feeds a pedalboard and a guitar amplifier, illustrating how mobile devices can be used for reamping.

Operating the Reamp HP

Радиалдык Реamp HP is designed for straightforward operation. Once connected, its primary function is to convert the signal and provide necessary impedance matching and ground isolation.

Input (1/4" and 3.5mm Mini In): These are the inputs for your line-level source (e.g., headphone output of an audio interface, smartphone, or tablet).
Моно которуу: When engaged, this switch sums the left and right channels of a stereo input into a single mono signal. This is crucial when reamping a stereo track through a mono amplifier or pedal.
Деңгээл баскычы: This control adjusts the output level of the Reamp HP. Use it to fine-tune the signal sent to your amplifier or effects pedals, ensuring optimal gain staging and preventing clipping.
Lift Switch: This is a ground lift switch. If you encounter hum or buzz in your audio signal, engaging this switch can break a ground loop, often resolving the noise.
Чыгуу: This 1/4" TS output delivers the reamped instrument-level signal to your amplifier, pedalboard, or other instrument-level input.

Side view of Radial Reamp HP showing Level, Lift, and Output controls

Сүрөт: Жакын пландан жасалган тарап view of the Radial Reamp HP, highlighting the Level knob, Lift button, and 1/4" Output jack. This view helps identify the controls on the output side of the device.

Side view of Radial Reamp HP showing Input, Mono, and Mini In controls

Сүрөт: Жакын пландан жасалган тарап view of the Radial Reamp HP, highlighting the 1/4" Input jack, Mono switch, and 3.5mm Mini In jack. This view helps identify the input controls on the device.

Техникалык тейлөө

Радиалдык Реamp HP is a passive device designed for durability and requires minimal maintenance. Following these guidelines will help ensure its longevity:

Тазалоо: Аппараттын сыртын сүртүү үчүн жумшак, кургак чүпүрөктү колдонуңуз. Абразивдүү тазалоочу каражаттарды, эриткичтерди же ашыкча нымдуулукту колдонуудан алыс болуңуз, анткени алар капталына же ички компоненттерине зыян келтириши мүмкүн.
Сактагыч: Аппаратты күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
Колдонуу: While robust, avoid dropping the unit or subjecting it to severe impacts, which could damage internal circuitry or connectors.
Байланыштары: Periodically check all cable connections for wear and tear. Ensure cables are securely plugged in but do not overtighten.

Проблемаларды чечүү

Көйгөй	Мүмкүн себеп	Чечим
No sound or very low output.	Туура эмес кабель туташуусу. Түзмөктүн үнүнүн булагы өтө төмөн. Reamp HP Level knob too low. Бузулган кабель.	Ensure all cables are correctly and securely connected. Increase the volume on your audio interface, smartphone, or tablet. Turn the LEVEL knob on the Reamp HP clockwise to increase output. Башка кабелди колдонуп көрүңүз.
Hum or Buzz (Ground Loop).	Ground loop between connected equipment.	Engage the LIFT switch on the Reamp HP. Ensure all equipment is plugged into the same power outlet or power conditioner.
Distorted or clipped sound.	Киргизүү сигналы өтө ысык. Reamp HP Level knob too high. Amplifier/pedal input overloaded.	Reduce the output volume from your source device (audio interface, smartphone). Turn the LEVEL knob on the Reamp HP counter-clockwise to decrease output. Киргизүү күчөтүүсүн тууралаңыз amplifier or pedals.
Stereo signal sounds incorrect or phasey when reampред.	Mono switch not engaged for mono reamping.	Engage the MONO switch on the Reamp HP to sum the stereo input to mono.

Техникалык шарттар

Өзгөчөлүк	Деталь
Түзмөк түрү	Passive Reampтүзмөк
Киргизүүлөр	1 x 1/4" TRS (Input), 1 x 3.5mm TRS (Mini In)
Чыгуу	1 x 1/4" TS (Output)
Controls	Level, Mono Switch, Ground Lift Switch
Изоляция	Built-in Isolation Transformer
Өлчөмдөр	5.15 x 2.95 x 2.3 дюйм
Салмагы	0.011 унция
Модель номери	R800 1038

Кепилдик жана колдоо

Radial Engineering products are designed and manufactured to the highest standards. For specific warranty information and technical support, please refer to the official Radial Engineering webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

For the most up-to-date information, visit: www.radialeng.com

	Radial JDI Passive Direct Box Колдонуучунун колдонмосу Radial JDI пассивдүү түз кутусу үчүн комплекстүү колдонуучу колдонмосу, анын өзгөчөлүктөрү, спецификациялары, тиркемелери жана бузулууларды жоюу. Анын Йенсен трансформатору, киргизүү/чыгыш импедансы жана аудионун оптималдуу иштешине кантип жетүүнү үйрөнүңүз.
	Radial HotShot MD Stage Mic Switcher Колдонуучу колдонмосу Radial HotShot MD үчүн колдонуучу көрсөтмөсү, сыяктууtagЭлектрондук микрофонду которгуч динамикалык микрофондорду бир нече багыттарга көз ирмемде өзгөртүү үчүн иштелип чыккан, вокалисттерди жана топтун байланышын оңой башкарууну камтыган.
	Radial J48 Active Direct Box Колдонуучунун колдонмосу Radial J48 Active Direct Box үчүн кеңири колдонуучу колдонмосунда анын өзгөчөлүктөрү, функциялары, мүнөздөмөлөрү жана кесипкөй аудио колдонмолор үчүн кепилдик жөнүндө маалымат камтылган.
	Radial LX-3 Passive Line Splitter User Guide User guide for the Radial LX-3 passive line-level audio splitter, covering features, setup, ground lift, mounting, and specifications.
	Radial StageBug SB-2 Passive Direct Box Quick Start Guide Quick start guide for the Radial StageBug SB-2, a compact passive direct box for active basses and keyboards. Learn how to connect and use the device with instruments and PA systems, including setup diagrams.
	Radial LX-3 Passive Line Splitter User Guide Comprehensive user guide for the Radial LX-3 passive line-level audio splitter. Learn about features, connections, ground lift, mounting options, and specifications.

Радиалдык инженерия R800 1038