1. Киришүү
The Artograph LED Tracer Opaque Art Projector is designed to assist artists and crafters in enlarging and tracing images. This portable device allows you to project flat artwork from 2 times up to 14 times its original size onto a vertical surface such as a wall or easel. It is suitable for various applications including sketching, outlining, creating murals, and transferring patterns.
This manual provides essential information for the safe and effective use of your LED Tracer projector. Please read it thoroughly before operation.
Figure 1: Artograph LED Tracer Opaque Art Projector, front-side view.
2. Коопсуздук маалыматы
- Электр камсыздоо: Use only the provided low voltage power adapter (12V, 1.5 AMP) and 6.5-foot long cord. Ensure the power outlet is easily accessible and properly grounded.
- Вентиляция: Do not block the ventilation openings on the projector. Adequate airflow is necessary to prevent overheating.
- Жылуулук: The projector's casing may become warm to the touch after extended use. This is normal. If it becomes excessively hot, discontinue use and allow it to cool down.
- Жайгашкан жери: Place the projector on a stable, flat surface to prevent it from falling.
- Нымдуулук: Проекторду суудан же башка суюктуктардан алыс кармаңыз. г менен операция жасабагылаamp чөйрөлөр.
- Балдар: Бул түзмөк оюнчук эмес. Кичинекей балдар жетпеген жерде сактаңыз.
3. Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- Artograph LED Tracer Opaque Art Projector
- 6.5-foot long power cord with standard 120V grounded plug
- Төмөн үнtage power adapter (12V, 1.5 AMP)
- Integrated 200mm optical glass lens
4. Орнотуу
- Таңылганын ачуу: Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
- Позиция проектору: Place the LED Tracer on a stable, flat surface. Ensure there is enough space for your artwork underneath and a clear path for the projection onto your desired vertical surface (wall, easel, canvas).
- Туташуу кубаты: Төмөнкү көлөмдү туташтырууtage power adapter to the projector's power input port. Plug the 6.5-foot power cord into a standard 120V grounded electrical outlet.
- Prepare Artwork: Place the artwork you wish to project directly underneath the projector's opening. The maximum copy size for the artwork is 5 inches by 5 inches.
Figure 2: Projector setup with artwork placed underneath.
5. Иштөө нускамалары
- Күйгүзүү: Press the power button, typically located on the top of the projector, to turn on the LED light source.
- Adjust Projection Distance: Move the projector closer to or further away from the vertical surface to adjust the size of the projected image. The projector can enlarge images from 2 times up to 14 times the original size.
- Focus Image: Rotate the lens barrel at the front of the projector to bring the projected image into sharp focus.
- Издөө: Once the image is focused and at the desired size, you can begin tracing or outlining on your chosen surface.
Мыкты натыйжалар үчүн кеңештер:
- Караңгы чөйрө: For maximum visibility and clarity of the projected image, operate the projector in a dark room. Ambient light significantly impacts projection performance.
- Large Designs: When working with larger designs or prints, it is recommended to work in sections.
- Сүрөт контраст: Images with good contrast and clarity will project more effectively.
Figure 3: Easy operation steps: Place, Project, Trace.
Figure 4: Adjusting the focus lens for a clear projection.
6. Техникалык тейлөө
- Линзаны тазалоо: Проектордун линзасын акырын сүртүү үчүн атайын оптикалык линзалар үчүн жасалган жумшак, түксүз кездемени колдонуңуз. Абразивдүү материалдардан же катуу химиялык заттардан алыс болуңуз.
- Тазалоо Casing: Проектордун сыртын жумшак, кургак чүпүрөк менен сүртүңүз. Суюк тазалоочу каражаттарды түз эле түзмөккө колдонбоңуз.
- Сактагыч: Колдонулбай турган учурда, проекторду салкын, кургак жерде, күндүн түз нурунан жана ашыкча чаңдан алыс сактаңыз.
- LED өмүрү: The integrated LED light source has a lifespan of up to 10,000 hours and does not require replacement.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Сүрөт чагылдырылган жок | Projector not powered on; Power cord not connected; Power outlet issue. | Ensure power button is pressed. Check power cord connections. Test outlet with another device. |
| Сүрөт бүдөмүк | Lens out of focus; Projector too close/far from surface. | Rotate the lens barrel to adjust focus. Adjust the distance between the projector and the projection surface. |
| Projected image is dim | Too much ambient light; Low contrast artwork. | Operate in a darker room. Use artwork with higher contrast. |
| Projector feels hot | Extended use; Blocked ventilation. | Discontinue use and allow to cool. Ensure ventilation openings are clear. |
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | 25370 |
| Продукциянын өлчөмдөрү | 12.75" W x 9" D x 9" H (32.39 cm x 22.86 cm x 22.86 cm) |
| Элемент Салмагы | 3 фунт (1.36 кг) |
| Объектив | 200 mm Optical Glass Lens |
| Жарык булагы | Жогорку интенсивдүү LED |
| LED жарыктыгы | 5,000 Lux |
| LED өмүрү | 10,000 саатка чейин |
| Көчүрүү өлчөмү | 5" x 5" (12.7 см x 12.7 см) |
| Проекция диапазону | 2X to 14X Enlargement |
| Камтылган компоненттер | Projector unit, 6.5-foot power cord, 12V 1.5 AMP электр адаптери |
| Монтаж түрү | Стол орнотуу |
Figure 5: Artograph LED Tracer specifications overview.
Figure 6: Artograph LED Tracer dimensions.
9. Кепилдик жана колдоо
For information regarding warranty coverage, product support, or service, please refer to the official Artograph website or contact Artograph customer service directly. Contact details can typically be found on the manufacturer's packaging or webсайт.