Hyzom Wi-Fi Repeater (Model B0BL2DRCST) User Manual

1. Киришүү

The Hyzom Wi-Fi Repeater is designed to extend the coverage of your existing wireless network. It eliminates Wi-Fi dead zones and improves signal strength, allowing for a more stable and reliable internet connection throughout your home or office. This device supports both Repeater and Access Point (AP) modes, offering flexibility for various networking needs.

Сүрөт 1: Алдыңкы view of the Hyzom Wi-Fi Repeater, showing its four external antennas and LED indicators.

2. Коопсуздук маалыматы

Please read and follow these safety instructions carefully to prevent damage to the device or injury to yourself.

• Аппаратты сууга же нымга тийгизбеңиз.
• Аппаратты өзүңүз ачпаңыз же оңдоого аракет кылбаңыз. Бардык тейлөөлөрдү квалификациялуу кызматкерлерге тапшырыңыз.
• Бул түзмөк үчүн көрсөтүлгөн кубат булагын гана колдонуңуз.
• Аппаратты жылуулук булактарынан жана түз күн нурунан алыс кармаңыз.
• Түзмөктүн айланасында жакшы желдетүүнү камсыз кылыңыз. Желдетүү тешиктерин жаппаңыз.
• Бул аппарат имараттын ичинде гана колдонууга арналган.

3. Орнотуу

The Hyzom Wi-Fi Repeater offers two primary setup methods: WPS (Wi-Fi Protected Setup) and Web Browser Configuration.

3.1. Физикалык орнотуу

1. Аппаратты таңгактан чыгаруу: Carefully remove the Wi-Fi Repeater from its packaging.
2. Жайгашкан жерди тандаңыз: Select a central location between your main router and the area where you need improved Wi-Fi coverage. Ensure it is within the range of your existing Wi-Fi signal.
3. Плагин: Plug the Wi-Fi Repeater into a standard electrical outlet. The power LED indicator should light up.

Figure 2: The Hyzom Wi-Fi Repeater is designed for wall-plug installation, blending into home decor.

3.2. Configuration via WPS (Recommended for quick setup)

WPS allows for a quick and easy connection without needing to enter network passwords.

1. Күйгүзүү: Plug the Wi-Fi Repeater into an electrical outlet.
2. Press WPS on Repeater: Press the WPS button on the side of the Hyzom Wi-Fi Repeater. The WPS LED indicator should start blinking.
3. Роутерде WPS баскычын басыңыз: Эки мүнөттүн ичинде негизги Wi-Fi роутериңиздеги WPS баскычын басыңыз.
4. Байланышты күтүңүз: The repeater will automatically connect to your router. Once connected, the signal strength LEDs on the repeater will light up, indicating a successful connection.

Figure 3: The WPS button on the side of the repeater simplifies the setup process.

3.3. аркылуу конфигурациялоо Web Browser (For advanced settings or if WPS fails)

1. Connect to Repeater's Network: Plug in the repeater. On your computer or mobile device, connect to the repeater's default Wi-Fi network (e.g., "Hyzom_Extender" or similar, usually found on a label on the device). No password is required initially.
2. Мүмкүнчүлүк Web Интерфейс: ачуу а web браузерди жана демейки IP даректи киргизиңиз (мисалы, 192.168.1.254 or repeater.local) into the address bar. Refer to the device label or quick start guide for the exact address.
3. Кирүү: Enter the default username and password (usually "admin" for both, or as specified on the device label).
4. Режимди тандоо: Choose either "Repeater Mode" or "AP Mode" based on your needs.
   • Кайталоо режими: Extends your existing Wi-Fi network. Select your main Wi-Fi network from the list, enter its password, and configure the extended network's name (SSID) and password.
   • AP режими: Transforms your wired network connection into a wireless access point. Connect an Ethernet cable from your router to the repeater's LAN port. Configure the new wireless network's name (SSID) and password.
5. Орнотууларды колдонуу: Save the settings and wait for the repeater to restart.
6. Кайра туташуу: Reconnect your devices to the new extended or AP network.

4. Операция

Once configured, the Hyzom Wi-Fi Repeater operates automatically to provide extended wireless coverage.

4.1. LED көрсөткүчтөрү

The LEDs on the front panel provide information about the device's status:

• Power LED: Түзмөктүн күйүп турганын көрсөтөт.
• WPS LED: Blinks during WPS setup, solid when WPS connection is established.
• Сигнал күчү LEDs: Indicate the strength of the signal received from your main router. More LEDs lit means a stronger signal. Aim for at least two or three LEDs for optimal performance.
• LAN/WAN LED: Ethernet портундагы активдүүлүктү көрсөтөт.

4-сүрөт: Арткы view of the Hyzom Wi-Fi Repeater, showing the power plug for direct wall insertion.

4.2. Network Coverage and Performance

The repeater is designed to provide up to 7000 square feet of extended Wi-Fi coverage. Its four external high-gain antennas help to achieve 360-degree full signal coverage, reducing signal loss when passing through walls and focusing signal strength towards your devices.

Figure 5: Illustration of how the Wi-Fi Repeater extends network coverage throughout a multi-story home, eliminating dead zones.

Figure 6: The repeater can connect up to 40 devices, supporting a wide range of compatible devices for various activities.

Figure 7: The extended Wi-Fi network supports multiple users and activities simultaneously.

4.3. Зымдуу туташуу

The repeater includes a WAN/LAN Ethernet port that supports both network output and input. This allows for a faster and more stable wired connection for devices like smart TVs, gaming consoles, or desktop computers, reducing wireless interference.

Figure 8: The Ethernet port provides options for both wired device connection and AP mode setup.

5. Техникалык тейлөө

Proper maintenance ensures the longevity and optimal performance of your Wi-Fi Repeater.

• Тазалоо: Аппараттын сыртын тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Суюк тазалагычтарды же аэрозолдорду колдонбоңуз.
• Оптималдуу жайгаштыруу: Periodically check the signal strength LEDs. If the signal is weak, consider repositioning the repeater closer to your main router or in a more open area.
• Программалык камсыздоонун жаңыртуулары: Өндүрүүчүнү текшериңиз website periodically for firmware updates. Updating the firmware can improve performance, add new features, and fix bugs. Follow the instructions provided by the manufacturer for any updates.
• Кайра иштетилүүдө: Эгерде сиз тармакта көйгөйлөргө туш болсоңуз, кайталагычты розеткадан 10 секундга сууруп, андан кийин кайра сайып, кайра күйгүзүп көрүңүз.

6. Кыйынчылыктарды

If you encounter problems with your Hyzom Wi-Fi Repeater, refer to the following common issues and solutions:

If problems persist, consider performing a factory reset on the repeater by pressing and holding the reset button (usually a small pinhole) for 5-10 seconds while the device is powered on. This will revert all settings to their default values.

7. Техникалык шарттар