1. Продукт бүтүп калдыview
This document provides instructions for the uxcell DC12V 60W 60RPM 8N.M Reversible Worm Gear Motor, model JCF63R. This electric gear motor is designed for applications requiring high torque and speed reduction. Its worm gear design offers self-locking capabilities, preventing back-driving when power is removed.
Негизги өзгөчөлүктөрү:
- Rated Voltage: DC 12V
- Номиналдуу ылдамдык: 60 RPM
- Номиналдуу кубаттуулугу: 60 Вт
- Номиналдуу момент: 8Н.М
- Дизайн: Right Angle, Reversible Worm Gear
- Монтаждоо: M6 screw holes
Типтүү колдонмолор: Garage doors, label printers, automatic shutters, automatic stabilizer voltage supplies, grills, ovens, cleaning machines, garbage disposers, household appliances, slot machinery, money detectors, automatic actuators, coin-refund devices, peristaltic pumps, remote control curtains, locks, paper shredders, copying machines, and safes.
2. Техникалык шарттар
| Спецификация | Нарк |
|---|---|
| Бренд | uxcell |
| Модел | JCF63R |
| Rated Voltage | DC 12V |
| Номиналдык ылдамдык | 60 RPM |
| Номиналдуу кубаттуулук | 60 Вт |
| Номиналдуу момент | 8Н.М |
| Мотор көлөмү | 63мм x 100мм (2.5" x 3.9") |
| Валдын диаметри | 10мм (0.39") |
| Кабелдин узундугу | 30см (11.8") |
| Монтаждоо | M6 screw holes |
| Материал | Металл, пластик |
| Элемент Салмагы | 1350 грамм |
| Сертификаттар | CE, RoHS |
Figure 1: Motor dimensions (front view). This image illustrates the overall length and width of the motor, including the gearbox and motor body, with measurements in millimeters.
Figure 2: Motor dimensions (side view). This image provides measurements for the shaft length, shaft diameter, and the depth of the gearbox assembly.
3. Орнотуу жана орнотуу
3.1 Моторду монтаждоо
- Identify the four M6 screw holes on the gearbox housing for secure mounting.
- Ensure the mounting surface is flat and rigid enough to support the motor's weight and operational torque.
- Use appropriate M6 screws (not included) of sufficient length to firmly attach the motor to your application. Avoid over-tightening to prevent damage to the motor housing.
Figure 3: Gearbox with mounting holes. This image highlights the four M6 threaded holes on the gearbox face, used for securing the motor to a surface.
Figure 4: Output shaft and mounting detail. A closer view of the output shaft, showing its diameter and the surrounding M6 mounting holes.
3.2 Электрдик туташуу
- Connect the motor to a stable DC 12V power supply.
- The motor has two wires (typically red and black). Connecting them one way will cause rotation in one direction, and reversing the polarity will cause rotation in the opposite direction.
- Кыска туташуунун алдын алуу үчүн бардык туташуулардын коопсуз жана изоляцияланганын текшериңиз.
- It is recommended to use a fuse or circuit breaker appropriate for the motor's 60W power rating to protect the circuit.
Figure 5: Motor with electrical connections. This image shows the motor from a side angle, clearly displaying the red and black power wires extending from the motor housing.
4. Иштөө нускамалары
- Күйгүзүү: Apply DC 12V power to the motor's terminals. The motor will begin to rotate at its rated speed of 60 RPM.
- Багыт көзөмөлдөө: To reverse the direction of rotation, reverse the polarity of the DC power supply connected to the motor's wires.
- Жүктөө тиркемеси: Apply the load gradually. Ensure the load does not exceed the motor's rated torque of 8N.M to prevent damage or stalling.
- Үзгүлтүксүз иштөө: The motor is designed for continuous operation within its specified limits. Monitor the motor's temperature during extended use.
Коопсуздук эскертүүсү: The temperature of the motor will rise during use. Avoid touching the motor surface with bare hands during or immediately after operation to prevent burns.
5. Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө оптималдуу иштөөнү камсыз кылат жана моторуңуздун иштөө мөөнөтүн узартат.
- Тазалоо: Periodically clean the exterior of the motor to remove dust and debris. Use a soft, dry cloth. Do not use solvents or immerse the motor in liquids.
- Текшерүү: Regularly inspect the motor for any signs of wear, loose connections, or damage to the wiring. Ensure mounting screws remain tight.
- Вентиляция: Ensure the motor has adequate ventilation to dissipate heat, especially during prolonged operation. Do not obstruct the motor's cooling surfaces.
- Майлоо: The gearbox is typically sealed and pre-lubricated for its lifespan. No additional lubrication is generally required. If unusual noises or resistance are observed, consult a qualified technician.
6. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Мотор иштебейт | Электр менен камсыздоо жок; Туура эмес көлөмtage; Loose wiring; Motor overload; Internal fault. | Check power supply (DC 12V); Verify wiring connections; Reduce load; Consult support if internal fault is suspected. |
| Мотор жай же азайтылган момент менен иштейт | Жетишсиз томtage; Excessive load; Friction in application; Worn components. | Электр менен камсыздоону текшерүү томtage; Reduce load; Inspect application for friction; Consult support. |
| Адаттан тыш ызы-чуу же титирөө | Loose mounting; Damaged gears; Bearing wear; Foreign object. | Tighten mounting screws; Inspect for damage; Consult support. |
| Мотор ысып кетет | Excessive load; Insufficient ventilation; Prolonged operation. | Reduce load; Ensure adequate airflow around motor; Allow motor to cool periodically. |
7. Кепилдик жана колдоо
For warranty information, please refer to the specific terms and conditions provided at the point of purchase or contact your retailer. uxcell products are typically covered by a standard manufacturer's warranty against defects in materials and workmanship.
For technical support, troubleshooting assistance beyond this manual, or inquiries regarding parts and service, please contact uxcell customer service through their official website or your product retailer. When contacting support, please have your product model (JCF63R) and purchase details readily available.
Онлайн ресурстар:
- зыярат кылыңыз uxcell Store on Amazon продукт маалымат жана жаңыртуу үчүн.