SURFOU зымсыз эшик коңгуроосунун N98 нускамасы

Introduction

Thank you for choosing the SURFOU Wireless Doorbell N98. This manual provides detailed instructions for the installation, operation, and maintenance of your new doorbell system. Please read this manual thoroughly before use to ensure proper functionality and safety.

The SURFOU Wireless Doorbell N98 offers a reliable and convenient solution for your home, featuring a long wireless range, multiple melodies, adjustable volume, and a durable, waterproof design.

Пакеттин мазмуну

Before installation, please verify that all components are present in your package:

• 2 x сайылуучу кабыл алгычтар
• 3 x Transmitters (Push Buttons)
• 3 x 12V23A Batteries (for transmitters)
• 1 x Screwdriver
• 4 x Sets of Screws
• 4 x Эки тараптуу жабышчаак ленталар
• 1 х Колдонуучунун колдонмосу (бул документ)

Image: Illustration of the SURFOU Wireless Doorbell N98 kit components, including receivers, transmitters, and installation accessories.

Орнотуу жана орнотуу

1. Өткөргүчтү (баскычты) орнотуу

1. Батарея салыңыз: Open the back cover of the transmitter and insert the provided 12V23A battery, ensuring correct polarity.
2. Жайгашкан жерди тандоо: Select a flat, vertical surface near your door. Ensure the surface is clean and dry for optimal adhesion.
3. Орнотуу ыкмасы:
   • Скотч: Peel off one side of the double-sided adhesive tape and stick it to the back of the transmitter. Peel off the other side and firmly press the transmitter onto the desired location for at least 30 seconds.
   • Бурамалар: For a more secure installation, use the provided screws. Mark the screw holes on the wall, drill pilot holes if necessary, and then secure the transmitter using the screws.
4. Сыноо: Press the transmitter button to ensure it activates the receiver.

Image: Visual guide demonstrating the two installation methods for the transmitter: using double-sided adhesive tape or screws.

2. Кабылдагычты орнотуу

1. Плагин: Simply plug the receiver into any standard electrical outlet within range of the transmitter.
2. Жайгашкан жери: Choose an outlet in a central location or where you are most likely to hear the chime. The compact design ensures it does not block adjacent outlets.

Image: The compact design of the receiver, showing it plugged into an outlet without obstructing the adjacent one.

Иштөө нускамалары

1. Өткөргүчтөрдү кабыл алгычтар менен жупташтыруу

Your doorbell kit comes pre-paired. If you need to re-pair or add new transmitters, follow these steps:

1. Жупташтыруу режимине кирүү: Кабыл алгычтагы баскычын басып, кармап туруңуз Үн баскычы (usually indicated by a speaker icon) for 5-8 seconds until the receiver emits a "ding" sound and its LED indicator flashes. This indicates it is in learning mode.
2. Send Signal: Quickly press the push button on the desired transmitter. The receiver will emit two "ding" sounds and its LED will flash, confirming successful pairing.
3. Жупташтыруу режиминен чыгуу: The receiver will automatically exit learning mode after 8 seconds if no further signal is received.

Image: Diagram illustrating the steps for pairing a transmitter with a receiver, showing the volume button, forward button, and the process of sending a signal from the push button.

2. Мелодияларды өзгөртүү

Эшиктин коңгуроосу 55 ар кандай обонду сунуштайт. Обонду өзгөртүү үчүн:

1. Обон тандаңыз: Кабыл алгычтагы баскычын басыңыз Алга баскычы (usually indicated by a music note icon) to cycle through the available melodies. Each press will play the next melody.
2. Set Melody: Once you find your preferred melody, stop pressing the button. The receiver will remember this selection.

Note: The doorbell features a memory function, retaining your last chosen melody even after a power outage.

Image: Receiver displaying icons for 55 different melodies and 5 volume levels, indicating customization options.

3. Үндү тууралоо

The doorbell has 5 adjustable volume levels, with a maximum of 110 dB.

1. Үндү тууралоо: Кабыл алгычтагы баскычын басыңыз Үн баскычы (speaker icon) to cycle through the 5 volume levels.
2. Үнсүз режим: One of the volume levels is a silent mode (0 dB) where only the LED indicator flashes, providing a visual notification without sound.

Image: Receiver in silent mode (0 dB), showing only the LED indicator flashing, suitable for quiet environments or hearing-impaired users.

Техникалык тейлөө

1. Батареяны алмаштыруу (өткөргүч)

The transmitter uses a 12V23A alkaline battery. When the LED indicator on the transmitter no longer lights up or the signal range decreases significantly, it's time to replace the battery.

1. Open Transmitter: Use the provided screwdriver or a small flat-head screwdriver to carefully open the back cover of the transmitter.
2. Батареяны алмаштыруу: Remove the old battery and insert a new 12V23A alkaline battery, ensuring the positive (+) and negative (-) terminals are correctly aligned.
3. Мукабаны жабуу: Арткы капкакты коопсуз жабыңыз.
4. Сыноо: Press the transmitter button to confirm it is working.

Сүрөт: жарылды view of the transmitter, showing the internal circuit board, battery compartment, LED indicator, and waterproof silicone ring.

2. Тазалоо

• Wipe the surfaces of the transmitter and receiver with a soft, dry cloth.
• Do not use abrasive cleaners or solvents, as these may damage the finish or internal components.

Проблемаларды чечүү

Техникалык шарттар

Image: Diagram illustrating the extensive 400-meter (1300 feet) wireless coverage of the doorbell system in an unobstructed area, showing signal reach across a house and garden.

Image: Close-up of the IP55 waterproof transmitter, highlighting its durability against water splashes and its wide operating temperature range from -22°F to 158°F.

Кепилдик жана колдоо

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official SURFOU webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.