NYXI Joypad Wireless Controller for Nintendo Switch/Lite/OLED

1. Киришүү

Thank you for choosing the NYXI Joypad Wireless Controller. This manual provides detailed instructions on how to set up, operate, and maintain your controller for an optimal gaming experience on Nintendo Switch, Switch Lite, and Switch OLED consoles.

2. Пакеттин мазмуну

Сураныч, кутудан чыкканда пакеттин мазмунун текшериңиз:

• NYXI Joypad Wireless Controller (Left & Right)
• USB-C заряддоо кабели
• User Manual

3. Controller Layout

Familiarize yourself with the buttons and features of your NYXI Joypad Controller:

• Сол Джойпад: Left Analog Stick, D-Pad, L/ZL Buttons, Capture Button, Minus (-) Button, Programmable Button (M1)
• Оң Джойпад: Right Analog Stick, A/B/X/Y Buttons, R/ZR Buttons, Home Button, Plus (+) Button, Programmable Button (M2)
• Both Joypads: RGB LED Indicators, USB-C Charging Port, Sync Button

Эскертүү: Баскычтын белгилүү бир функциялары оюнга жараша ар кандай болушу мүмкүн.

4. Орнотуу

4.1 Алгачкы заряддоо

Before first use, fully charge the controllers. Connect the USB-C charging cable to the charging port on each joypad and then to a USB power source (e.g., Nintendo Switch dock, USB wall adapter). The RGB LED indicators will show charging status and turn off when fully charged.

4.2 Nintendo Switch менен жупташтыруу

There are two methods to pair your NYXI Joypad controllers with your Nintendo Switch console:

1. Method 1: Direct Attachment

   Slide the left and right Joypads onto the side rails of your Nintendo Switch console until you hear a click. The console will automatically detect and pair the controllers. Once paired, you can detach them for wireless play.
2. Method 2: Wireless Pairing
   • From the Nintendo Switch HOME Menu, select "Controllers" > "Change Grip/Order".
   • On each NYXI Joypad, press and hold the small Синхрондоо баскычы (usually located on the side or bottom) for a few seconds until the RGB LED indicators start flashing rapidly.
   • The console will detect the controllers. Once paired, the LED indicators will light up steadily.

Ensure your Nintendo Switch console is updated to the latest system software version for optimal compatibility.

5. Иштөө нускамалары

5.1 Wake Up Function

When the console is in sleep mode, press the Башкы бет баскычы on the right Joypad to wake up the Nintendo Switch console wirelessly.

5.2 Турбо функциясы

Turbo функциясы баскычты басууну тез, үзгүлтүксүз киргизүүгө мүмкүндүк берет. Жандыруу үчүн:

1. Press and hold the desired action button (e.g., A, B, X, Y, L, R, ZL, ZR).
2. Аракет баскычын кармап туруп, басыңыз Турбо баскычы (refer to controller diagram if available, or typically a dedicated button).
3. Release both buttons. The action button will now continuously input until Turbo is deactivated.

To deactivate Turbo, repeat the process: hold the action button and press the Turbo Button again.

5.3 RGB LED Adjustment

The NYXI Joypads feature adjustable RGB LED lighting. Specific controls for changing colors or modes are usually found by pressing a dedicated LED button or a combination of buttons (e.g., L3 + R3 + A). Refer to the quick start guide or product packaging for exact button combinations.

5.4 Adjustable Vibration

The vibration intensity can be adjusted to your preference. This is typically done through a button combination (e.g., Turbo + D-Pad Up/Down) or via the Nintendo Switch system settings under "Controllers and Sensors".

5.5 Programmable Buttons (M1/M2)

The M1 (left Joypad) and M2 (right Joypad) buttons can be programmed to mimic other button inputs or sequences. Follow these general steps to program them:

1. басып, кармап туруңуз Программа баскычы (often a small button on the back or side, or a combination like SET + M1/M2) until an indicator light flashes.
2. Press the button or sequence of buttons you wish to assign to M1/M2.
3. Press the M1 or M2 button to confirm the assignment. The indicator light will stop flashing.

To clear a programmed button, repeat the programming process without inputting any new buttons, or refer to specific instructions for a reset function.

6. Техникалык тейлөө

6.1 Тазалоо

To clean your controllers, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or solvents. Ensure no liquid enters the controller's openings.

6.2 Сактоо

Store the controllers in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If storing for an extended period, ensure they are fully charged to preserve battery life.

7. Кыйынчылыктарды

7.1 Controller Not Pairing

• Ensure the controllers are sufficiently charged.
• Nintendo Switch консолу эң акыркы тутумдук программалык камсыздоого жаңыртылганын текшериңиз.
• Try re-pairing using both direct attachment and wireless pairing methods.
• Nintendo Switch консолуңузду өчүрүп-күйгүзүңүз.
• Reset the controllers by pressing the small reset button (if available, often a pinhole) or holding the Sync button for an extended period.

7.2 Киргизүү артта калуу же ажыратуулар

• Консоль менен башкаруу элементтеринин ортосунда эч кандай тоскоолдуктар жок экенин текшериңиз.
• Консолго жакыныраак жылыңыз.
• Тоскоолдук жаратышы мүмкүн болгон башка зымсыз түзмөктөрдү текшериңиз.
• Ensure controllers are fully charged.

7.3 Баскычтар жооп бербейт

• Check if the button is stuck or obstructed.
• Test the button in the Nintendo Switch "Test Input Devices" settings.
• Perform a controller reset.

8. Техникалык шарттар

9. Кепилдик жана колдоо

NYXI products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the product packaging or visit the official NYXI webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

Please note that warranty terms may vary by region and retailer.