HPBS 2000A Portable Jump Starter User Manual

1. Киришүү

Thank you for choosing the HPBS 2000A Portable Jump Starter. This device is designed to provide a reliable power source for jump-starting vehicles with dead batteries, as well as charging various electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Коопсуздук маалыматы

Always observe the following safety precautions to prevent injury or damage to the device and your vehicle:

• Кызыл жана кара кл жол бербеampбири-бирине тийүү.
• Do not jump-start a vehicle if the battery voltage 12Vдан төмөн.
• Шайманды туташтырганда туура полярдуулукту камсыз кылыңызamps унаанын аккумуляторуна.
• Аппаратты экстремалдык температурага, түз күндүн нуруна же сууга калтырбаңыз.
• Балдар жетпеген жерде сактаңыз.
• If the device becomes excessively hot during use, discontinue operation immediately.
• Ар дайым cl ажыратыңызamps from the vehicle battery in reverse order of connection (black first, then red).

3. Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

Image: All components included in the HPBS 2000A Portable Jump Starter package, laid out neatly.

• HPBS 2000A Portable Jump Starter
• Smart Jumper кабелдери
• USB-C заряддоо кабели
• 12V DC унаа заряддагыч адаптер
• User Manual
• Сактоочу куту

4. Продукт бүтүп калдыview

Familiarize yourself with the various parts and functions of your HPBS Jump Starter:

Сүрөт: деталдуу view of the HPBS jump starter highlighting its various ports and buttons, including the power button, indicator lights, USB outputs, USB-C input, EC5 output, DC output, and LED flashlight.

1. Кубат баскычы
2. Indicator Lights (for battery level and status)
3. EC5 Output Port (for jumper cables)
4. USB-C Input (for charging the jump starter)
5. USB чыгаруу 1
6. USB чыгаруу 2
7. LED фонарик
8. DC чыгышы 12-16V/6A

5. Стартерди кубаттоо

Before first use, fully charge the jump starter. It is recommended to recharge the device every 3-6 months to maintain optimal battery health.

Image: The HPBS jump starter being charged via a wall adapter, indicating a charging time of approximately 4.5 hours from 0% to 100%.

• Connect the provided USB-C charging cable to the USB-C Input port (4) on the jump starter.
• Connect the other end of the USB-C cable to a suitable USB wall adapter (not included) or the 12V DC car charger adapter.
• The digital display will show the charging progress. The device is fully charged when the display shows 100%.

6. Секирип баштоо үчүн орнотуу

Ensure the jump starter is adequately charged before attempting to jump-start a vehicle.

Image: A step-by-step illustration showing how to insert the jumper cable into the booster, connect the clamps to the car battery, and start the car engine.

• Connect the smart jumper cables to the EC5 Output Port (3) on the jump starter. Ensure a firm connection.
• кызыл (оң) cl туташтырууamp унаанын өлүп калган аккумуляторунун оң (+) терминалына.
• кара (терс) cl туташтырууamp to the negative (-) terminal of the vehicle's dead battery.
• The smart jumper cable indicator light will show green if the connection is correct and safe to proceed. If it shows red or flashes, check the connections.

7. Operating the Jump Starter

Once the setup is complete and the smart cable indicator is green:

Image: The HPBS jump starter positioned next to a car engine, with jumper cables connected to the battery terminals, illustrating its use for starting dead batteries.

• Унааңыздын кыймылдаткычын иштетиңиз.
• If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.
• Once the vehicle starts, immediately disconnect the black (negative) clamp унаанын аккумуляторунан.
• Then, disconnect the red (positive) clamp унаанын аккумуляторунан.
• Finally, disconnect the smart jumper cables from the jump starter.

8. Power Bank функциясы

The HPBS Jump Starter can also function as a power bank to charge your electronic devices.

Image: The HPBS jump starter connected via USB cables to charge a smartphone, a tablet, and a smartwatch, demonstrating its 20000mAh power bank capability.

• Connect your device's USB charging cable to either USB Output 1 (5) or USB Output 2 (6) on the jump starter.
• Секирип баштоочу түзмөгүңүздү автоматтык түрдө кубаттай баштайт.
• Санарип дисплей батареянын калган пайызын көрсөтөтtagсекирүү стартер.
• The DC Output port (8) can be used to power 12-16V/6A compatible devices.

9. LED Flashlight Functionality

The built-in LED flashlight provides illumination for various situations.

Сүрөт: жакын план view of the HPBS jump starter, focusing on the integrated LED flashlight, which is illuminated.

• Press and hold the Flashlight Button (7) for 3 seconds to turn on the LED light.
• Press the Flashlight Button (7) again to cycle through the modes: solid light, strobe, and SOS signal.
• Press and hold the Flashlight Button (7) for 3 seconds to turn off the LED light.

10. Техникалык тейлөө

Proper maintenance ensures the longevity and performance of your jump starter:

• Аппаратты күн тийбеген, салкын, кургак жерде сактаңыз.
• Recharge the jump starter at least once every 3-6 months, even if not in use, to prevent deep discharge and extend battery life.
• Сыртын жумшак менен тазалаңыз, гamp кездеме. Катуу химиялык заттарды же абразивдүү материалдарды колдонбоңуз.
• Портторду чаңдан жана таштандылардан таза кармаңыз.

11. Кыйынчылыктарды

If you encounter issues with your HPBS Jump Starter, refer to the following common solutions:

• Түзмөк күйбөй жатат: Ensure the device is charged. Press and hold the Power Button (1) for a few seconds.
• Унаа от албай жатат: Check that the smart jumper cables are securely connected to both the jump starter and the vehicle battery terminals. Ensure correct polarity (red to positive, black to negative). The smart cable indicator should be green.
• Кол чырак иштебей жатат: Press and hold the Flashlight Button (7) for 3 seconds to activate. If it still doesn't work, ensure the device has sufficient charge.
• Түзмөк кубатталбай жатат: Verify that the USB-C cable and wall adapter are functioning correctly. Ensure the cable is firmly inserted into the USB-C Input port (4).

12. Техникалык шарттар

Image: The HPBS 2000A Portable Jump Starter displaying a 100% charge level on its screen, with jumper cables and a charging adapter visible.

13. Кепилдик жана колдоо

For warranty information, product registration, or technical support, please refer to the product packaging or visit the official HPBS webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.