1. Киришүү
The MEET Pen Type Smart Multimeter is designed for accurate and safe electrical measurements. This device is suitable for both professional and DIY applications, offering features such as auto-ranging voltage measurement, resistance, diode, and continuity testing. It also includes Non-Contact Voltage (NCD) detection and Single Probe Test (SPT) for enhanced utility. The multimeter features Bluetooth connectivity for real-time data transmission to a smartphone or tablet application.
2. Пакеттин мазмуну
Төмөндө тизмеленген нерселердин баары пакетиңизде бар экенин текшериңиз:
- 1 x Digital Multimeter Detector with attached Test Lead
- 1 x Колдонуу боюнча колдонмо (бул документ)
- 2 x 1.5V Batteries (L1154/LR44/AG13)
3. Продукциянын өзгөчөлүктөрү
- Smart Multimeter with TX Function: Connects to Android/iOS apps for real-time measurement data viewкиргизүү жана жаздыруу.
- Автоматтык диапазон: Automatically selects the correct range for DC/AC voltagд, каршылык жана үзгүлтүксүздүк өлчөө.
- High Efficiency Single Probe Test (SPT): Patented numerical digital display for AC voltage in a circuit, improving measurement efficiency.
- Бир нече функциялар: Measures AC/DC 300V voltage, continuity, resistance, diode, Non-Contact AC (NCD), and Single Probe Test AC (SPT).
- Өркүндөтүлгөн коопсуздук: Features 250V Anti-Burn Protection, dual insulation, and overload protection, meeting CAT III 300V safety standards.
- Дисплей жана кубат: Digital display with backlight for dimly lit areas, 'OL' over-range display, low battery warning.
- Ыңгайлуулугу: Software calibrated, Freeze/Hold reading function, and auto power-off after 5 minutes of inactivity (can be set to always 'On').
Figure 1: ашыкview of the MEET Pen Type Smart Multimeter and its core functions, including AC/DC Voltage, Resistance, Diode, Continuity, NCD, SPT, Data Hold, and Bluetooth integration.
4. Орнотуу
4.1 Батареяны орнотуу
- Мультиметрдин артындагы батарея бөлүкчөсүнүн капкагын табыңыз.
- Use a small screwdriver to open the battery compartment.
- Insert the two 1.5V (L1154/LR44/AG13) batteries, ensuring correct polarity (+/-).
- Батарея уясынын капкагын ордуна коюңуз жана аны бурама менен бекитиңиз.
Figure 2: Illustration of the battery compartment for installing 1.5V batteries.
4.2 Колдонмону жүктөп алуу жана Bluetooth туташуусу
- Scan the QR code provided in the physical manual (or search for the "MEET Multimeter" app) to download the companion application for your iOS or Android smartphone/tablet.
- Смарт түзмөгүңүздө Bluetooth иштетилгенин текшериңиз.
- Turn on the multimeter. The Bluetooth indicator on the multimeter display will activate.
- Open the MEET Multimeter app on your smart device and follow the in-app instructions to pair with the multimeter. The connection range is approximately 15 meters.
Figure 3: The multimeter transmitting data wirelessly to a smartphone application.
5. Иштөө нускамалары
Before operation, ensure the multimeter is powered on. The device features auto-ranging for most measurements, simplifying usage.
5.1 Күйгүзүү/өчүрүү
- Күйгүзүү үчүн, которгучту "ON" абалына жылдырыңыз.
- The device will automatically power off after 5 minutes of inactivity to conserve battery. This feature can be disabled if continuous operation is required.
- To manually power off, slide the switch to the 'OFF' position.
5.2 Өлчөө AC/DC Voltage
- Ensure the multimeter is in the voltage measurement mode (indicated by 'V' on the display). The device automatically detects AC or DC voltage.
- Connect the test lead to the circuit or component you wish to measure.
- Томду окуңузtage мааниси экранда көрсөтүлөт.
Figure 4: The multimeter displaying a voltage measurement, indicating 109V.
5.3 Resistance, Diode, and Continuity Testing
- Press the 'Select' button to cycle through Resistance (Ω), Diode (→|), and Continuity (•))) modes.
- For resistance, connect the test lead across the component. The resistance value will be displayed.
- For diode testing, connect the test lead across the diode. The forward voltage тамчы көрсөтүлөт.
- For continuity, connect the test lead across the circuit. A buzzer will sound if continuity is detected (typically below 50Ω).
5.4 Non-Contact AC Detection (NCD)
- Select the NCD mode.
- Bring the tip of the multimeter close to an AC voltage source (e.g., a live wire).
- The device will indicate the presence and strength of the AC signal (typically for voltages >25V AC) without direct contact.
Figure 5: The multimeter's NCD function detecting AC voltagд физикалык байланышсыз.
5.5 Single Probe Test AC (SPT)
- Select the SPT mode.
- Use the single probe to test AC voltage in a circuit. The patented numerical digital display will show the AC voltage (for voltages >25V AC).
5.6 Маалыматтарды кармоо
- Press the 'Hold' button to freeze the current reading on the display.
- Press 'Hold' again to release the reading and resume live measurements.
Продукциянын демонстрациясы
Video 1: Official demonstration of the MEET Pen Type Digital Multimeter, highlighting its features and Bluetooth connectivity. This video is provided by MEET Electronics.
6. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Санариптик дисплей | 3 ½ digits, 1999 counts |
| AC/DC Voltage | Auto-ranging up to 300V |
| Каршылык | Auto-ranging up to 20MΩ |
| Үзгүлтүксүздүк | Buzzer sounds for <50Ω |
| Диод текшерүү | Алга томtage drop up to 2.0V |
| NCD (Non-contact AC Detector) | Detects >25V AC with numerical display |
| SPT (Single Probe Test AC) | Detects >25V AC with numerical display |
| Маалыматтарды кармоо | Ооба |
| Авто өчүрүү | 5 мүнөт (өчүрүлүшү мүмкүн) |
| Relative Reading | Ооба |
| Киргизүү импедансы | 10МΩ |
| Anti-Burn Protection (ABP) | Up to 250V (AC/DC) on full range |
| Батареянын аздыгы жөнүндө эскертүү | Yes (<2.6V approx) |
| TX Connectivity | Bluetooth to iOS/Android apps |
| Иштөө температурасы | 0°C - 50°C (32°F - 122°F) |
| Иштөө нымдуулугу | 80% RH макс |
| Батарея түрү | 2 x 1.5V (L1154/LR44/AG13) |
| Өлчөмдөрү (LxWxD) | х 161mm 24 х 24 (6.34 х 0.94 х 0.94 дюйм) |
| Модел | MS-BDTP1A |
| UPC | 842301100771 |
7. Техникалык тейлөө
7.1 Тазалоо
Wipe the multimeter's exterior with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз. Тазалоодон мурун аппараттын өчүрүлгөнүн жана бардык чынжырлардан ажыратылганын текшериңиз.
7.2 Батареяны алмаштыруу
When the low battery indicator appears on the display, replace the batteries promptly to ensure accurate measurements. Refer to section 4.1 for battery installation instructions. Always use two new 1.5V (L1154/LR44/AG13) batteries.
7.3 Сактоо
Мультиметр узак убакыт бою колдонулбай турган болсо, батарейкалардын агып кетүүсүнө жана бузулушуна жол бербөө үчүн алып салыңыз. Аппаратты салкын, кургак жерде, тике күн нурунан жана экстремалдык температурадан алыс сактаңыз.
8. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Мультиметр күйбөйт. | Өлүк же туура эмес орнотулган батарейкалар. | Батареянын полярдуулугун текшериңиз жана керек болсо батарейкаларды алмаштырыңыз. |
| "OL" (Over Load) displayed. | The measured value exceeds the selected range. | The multimeter is auto-ranging, but if the value is extremely high, it may still show "OL". Ensure the measurement is within the device's maximum capabilities (e.g., 300V for voltagжана). |
| Туура эмес окуулар. | Low battery, poor connection, or incorrect mode. | Replace batteries, ensure test lead has good contact, and verify the correct measurement mode is selected. |
| Bluetooth байланышы ишке ашпай калды. | Bluetooth disabled on smart device, app not open, or out of range. | Ensure Bluetooth is on, the app is running, and the multimeter is within 15m of the smart device. Restart both devices if needed. |
9. Коопсуздук маалыматы
- Ар дайым жергиликтүү жана улуттук коопсуздук эрежелерин сактаңыз.
- Do not use the multimeter if it appears damaged or if the test lead is compromised.
- Баалангандан ашык колдонбоңузtage (300V AC/DC) between the terminals or between any terminal and ground.
- Том менен иштөөдө өтө этият болуңузtag30V AC RMS, 42V пик же 60V DC жогору. Бул томtagшок коркунучун жаратат.
- Өлчөөлөрдү жүргүзүүдөн мурун, туура функция жана диапазон тандалганын текшериңиз.
- The device is rated CAT III 300V. Do not use it for measurements exceeding this category or voltage.
- Keep fingers behind the finger guards on the test lead during measurements.
- Replace batteries immediately when the low battery indicator appears to prevent inaccurate readings.
10. Кепилдик жана колдоо
MEET Electronics is committed to customer satisfaction. If you encounter any issues or are not 100% satisfied with your product, please contact our support team. We strive to resolve all problems and our professional support team aims to respond within 24 hours.
For support, please refer to the contact information provided with your purchase or visit the official MEET Electronics webсайт.