multicomp PRO MP700005 Handheld Loop Calibrator User Manual

1. Киришүү

This manual provides comprehensive instructions for the safe and effective operation of the multicomp PRO MP700005 Handheld Loop Calibrator. Please read this manual thoroughly before using the device and retain it for future reference.

2. Коопсуздук маалыматы

Always observe standard safety precautions when operating electrical equipment.

• Do not operate the calibrator if it appears damaged.
• Батареяны туура орнотууну камсыз кылыңыз.
• Refer to local regulations for proper disposal of batteries and the device.

3. Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизде бар экенин текшериңиз:

• MP700005 Handheld Loop Calibrator
• Сыноо Лидер
• PP3 Battery

4. Продукт бүтүп калдыview

The multicomp PRO MP700005 is a versatile handheld loop calibrator designed for measuring and sourcing DC voltage, DC current, and 4-20mA loop current. It features manual stepping, automatic stepping, and ramping output capabilities, along with 24V loop power provision.

Сүрөт 1: Алдыңкы view of the multicomp PRO MP700005 Handheld Loop Calibrator, showing the LCD display, function buttons, and input/output terminals. The device has a green protective casing.

4.1. Негизги өзгөчөлүктөрү

• Measures: DC voltage, DC current, 4-20mA loop current
• Output functions: DC current, analog transmitter, 24V loop
• Manual stepping, automatic stepping, and ramping output
• Stores and recalls setup configurations
• Provides 24V loop power to transmitters while simultaneously measuring mA current
• Автоматтык рamp for DC current output

5. Орнотуу

5.1. Батареяны орнотуу

1. Locate the battery compartment cover on the rear of the calibrator.
2. Отсекти ачуу үчүн бурагычты колдонуңуз.
3. Insert the supplied PP3 9V battery, observing correct polarity.
4. Батарея бөлүгүнүн капкагын бекем жабыңыз.

5.2. Баштапкы күйгүзүү

Press the power button (typically marked with a ⑁ symbol) to turn on the calibrator. The LCD display will illuminate and show the default measurement or source mode.

6. Иштөө нускамалары

6.1. Сыноо линияларын туташтыруу

Connect the test leads to the appropriate input/output terminals (24V, V, COM, mA) on the calibrator based on the desired measurement or sourcing function. Ensure connections are secure.

6.2. DC Voltage/Current

1. Select the desired measurement mode (e.g., V for voltage, mA for current) using the MEAS/SOURCE button or dedicated function buttons.
2. Сыноо өткөргүчтөрүн сыналган схемага туташтырыңыз.
3. LCD дисплейдеги өлчөө маанисин окуңуз.

6.3. Sourcing DC Current (4-20mA Loop)

1. Select the source mode for mA output.
2. Use the directional buttons (25%, 0%, 100%) or 100% коюу/0% коюу buttons to adjust the output current.
3. The calibrator supports manual stepping, automatic stepping, and ramping output for precise control. Refer to the on-screen indicators for current output status.

6.4. Providing 24V Loop Power

The calibrator can provide 24V loop power to a transmitter while simultaneously measuring the mA current. Connect the transmitter to the designated 24V and mA terminals.

6.5. Storing and Recalling Setups

The device allows users to store and recall frequently used setup configurations. Consult the on-screen menu or dedicated buttons for these functions.

7. Техникалык тейлөө

7.1. Тазалоо

Калибраторду жумшак, d менен сүртүңүзamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.

7.2. Батареяны алмаштыруу

When the low battery indicator appears on the display, replace the 9V battery as described in the "Battery Installation" section.

8. Кыйынчылыктарды

• Кубат жок: Check battery installation and ensure the battery is not depleted.
• Туура эмес окуулар: Verify test lead connections and ensure the correct measurement mode is selected.
• Output Not Functioning: Check connections to the device under test and ensure the calibrator is in the correct source mode.

Эгер көйгөйлөр чечилбесе, кардарларды колдоо кызматына кайрылыңыз.

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information or technical support, please refer to the documentation provided with your purchase or contact multicomp PRO customer service.