Loocam 900MHz Point-to-Point Wireless Bridge Outdoor User Manual

1. Киришүү

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Loocam 900MHz Point-to-Point Wireless Bridge Outdoor. This device is designed to extend network connectivity over long distances in outdoor environments, utilizing Wi-Fi HaLow technology. Please read this manual thoroughly before using the product to ensure proper setup and optimal performance.

2. Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз. Эгерде кандайдыр бир нерселер жок болсо же бузулса, кардарларды колдоо менен байланышыңыз.

2 x Wireless Bridge Units (one Transmitter (TX), one Receiver (RX))
2 x WiFi антенналары
2 х Power адаптерлери
2 x Ethernet кабелдери
Mounting Screws (for installation)
Продукт боюнча колдонмо (бул документ)

Image showing the contents of the Loocam Wireless Bridge package: two bridge units, two antennas, two power adapters, two Ethernet cables, and mounting screws.

2.1-сүрөт: Пакеттин мазмуну

Деталдаштырылган view of the Loocam Wireless Bridge unit showing ports and indicators.

Figure 2.2: Wireless Bridge Unit Details (Ports and Indicators)

3. Орнотуу жана орнотуу

The Loocam Wireless Bridge is designed for plug-and-play operation with automatic pairing. Follow these steps for initial setup.

3.1 Connecting to a PC (Exampле)

Антенналарды тиркөө: Screw the provided antennas onto the TX and RX bridge units.
Power On TX Unit: Connect the power adapter to the TX bridge unit and plug it into a power outlet.
Connect TX to Router: Use one Ethernet cable to connect the TX bridge unit to a LAN port on your router.
Power On RX Unit: Connect the power adapter to the RX bridge unit and plug it into a power outlet.
Connect RX to PC: Use the second Ethernet cable to connect the RX bridge unit to your computer's Ethernet port (you may need a USB to Ethernet adapter for laptops without a built-in port).
Байланышты текшерүү: Once both units are powered and connected, they will automatically pair. The computer connected to the RX unit should now be able to access the internet.

Diagram showing two Loocam wireless bridge units, one connected to a router (TX) and the other to a laptop (RX), extending network wirelessly.

Figure 3.1: Basic PC Connection Diagram

Image illustrating the Loocam wireless bridge extending network from a main building to a second building, eliminating dead zones.

Figure 3.2: Extending Network to a Second Building

3.2 Connecting to an NVR (Exampле)

The wireless bridge can also be used to extend network connectivity for IP cameras and Network Video Recorders (NVRs).

Антенналарды тиркөө: Screw the provided antennas onto the TX and RX bridge units.
Power On TX Unit: Connect the power adapter to the TX bridge unit and plug it into a power outlet.
Connect TX to IP Camera: Use one Ethernet cable to connect the TX bridge unit to your IP camera.
Power On RX Unit: Connect the power adapter to the RX bridge unit and plug it into a power outlet.
Connect RX to NVR: Use the second Ethernet cable to connect the RX bridge unit to an available Ethernet port on your NVR.
Байланышты текшерүү: The NVR should now detect the IP camera connected via the wireless bridge.

Diagram showing a Loocam wireless bridge extending network from an IP camera (TX) to an NVR (RX), enabling remote surveillance.

Figure 3.3: NVR Connection Diagram

3.3 Физикалык орнотуу

The bridge units can be mounted to a wall or other suitable surface using the provided screws.

Mark Positions: Hold the bridge unit against the desired mounting surface and mark the positions for the two screw holes.
Бургулоо тешиктери: Белгиленген позицияларда пилоттук тешиктерди бургула.
Коопсуздук бирдиги: Align the bridge unit with the holes and secure it using the provided screws.

Step-by-step guide on how to install the Loocam wireless bridge by connecting antennas, Ethernet, and power, then drilling and screwing it to a wall.

3.4-сүрөт: Орнотуу кадамдары

3.4 Identifying TX and RX Units

The units are pre-paired. One unit acts as the Transmitter (TX) and the other as the Receiver (RX). You can identify them by observing the indicator lights after powering on:

The RX light on the Receiver (RX) unit should be illuminated.
The RX light on the Transmitter (TX) unit should be off.

Diagram illustrating how to identify the TX (Transmitter) and RX (Receiver) units by observing their indicator lights when connected to a router and a computer/NVR.

Figure 3.5: TX and RX Identification

3.5 Видеону орнотуу

For a visual guide on connecting the Loocam Wireless Bridge, please watch the official setup video below.

Video 3.1: How to Connect Loocam Wireless Bridge. This video demonstrates the step-by-step process of connecting the wireless bridge units to a router and a computer, as well as to an NVR and camera, showing the physical connections and power-on sequence.

4. Операция

The Loocam Wireless Bridge operates on a point-to-point principle, extending your network wirelessly.

Жыштык тилкеси: Operates in the 902MHz-928MHz band, offering strong penetration capabilities.
Өткөрүү расстояние: Achieves up to 2000 feet wireless transmission distance in open areas.
Wi-Fi HaLow Technology: Utilizes 802.11ah Wi-Fi HaLow for extended coverage and improved obstacle penetration (up to 350 feet through one wall).
Дайындардын ылдамдыгы: Supports speeds up to 16Mbps. Note that Wi-Fi HaLow is optimized for range and penetration rather than high bandwidth.
Тиркемелер: Ideal for extending network coverage between buildings, for video surveillance systems, and for expanding Wi-Fi coverage in areas where traditional Wi-Fi signals are weak.

Image showing two Loocam wireless bridge units communicating over a long distance in an open area, indicating a 2000ft range.

Figure 4.1: Ultra Long Range Transmission

Image illustrating the 902MHz-928MHz band capabilities of the Loocam wireless bridge, highlighting 16Mbps network speed, Sub-1 GHz WiFi HaLow, obstacle penetration, stable transmission, wide-area coverage, and high-quality image support.

Figure 4.2: 900MHz Band Features

Image demonstrating the superior obstacle penetration of the Loocam wireless bridge using Wi-Fi HaLow technology, showing a signal passing through a wall to connect a camera.

Figure 4.3: Superior Obstacle Penetration

Image showing the Loocam wireless bridge extending monitoring range for a security camera system, providing long-distance surveillance.

Figure 4.4: Extended Monitoring Range

Image depicting various indoor and outdoor scenarios where the Loocam wireless bridge can provide network extension coverage, including garages, shops, warehouses, elevators, farms, and yards.

Figure 4.5: Indoor & Outdoor Network Extension Coverage

5. Техникалык тейлөө

The Loocam Wireless Bridge is designed for outdoor use with a weather-resistant (IP65) rating. To ensure longevity and optimal performance:

Экологиялык шарттар: The device operates effectively in temperatures ranging from -5°F to 120°F (-20°C to 48°C). Avoid exposing the device to conditions outside this range for extended periods.
Тазалоо: Periodically clean the exterior of the units with a soft, dry cloth to remove dust and debris. Do not use liquid cleaners or solvents.
Кабелдин бүтүндүгү: Regularly inspect all connected cables (power and Ethernet) for any signs of wear or damage. Replace damaged cables immediately.
Антеннанын абалы: Ensure antennas are securely attached and positioned for optimal signal strength.

Image showing the Loocam wireless bridge with icons representing various weather conditions like sun, rain, thunder, snow, wind, and frost, indicating its weatherproof design and operating temperature range from -4°F (-20°C) to 158°F (70°C).

Figure 5.1: Weatherproof Design

6. Кыйынчылыктарды

If you encounter issues with your Loocam Wireless Bridge, refer to the following common problems and solutions:

Көйгөй	Мүмкүн себеп	Чечим
Тармак туташуусу жок	Кубат туташкан жок Ethernet cables loose or faulty Жупташпаган бирдиктер Out of range or significant obstacles	Эки блоктун тең күйгүзүлгөнүн текшериңиз. Бардык Ethernet кабелдеринин туташууларын текшериңиз. Verify TX/RX lights as per Section 3.4. Relocate units closer or adjust antenna alignment.
Тармактын ылдамдыгы жай	Inherent limitation of Wi-Fi HaLow (max 16Mbps) кийлигишүү же тоскоолдуктар Эскирген микропрограмма	Understand that this technology prioritizes range over speed. Minimize obstacles between units. Өндүрүүчүнүн микропрограммасынын жаңыртууларын текшериңиз webсайт (эгер бар болсо).
үзгүлтүктүү байланыш	Сигналдын күчү начар Тышкы кийлигишүү Кубаттын өзгөрүшү	Мүмкүн болсо, көздүн так сызыгын камсыз кылыңыз. Check for other 900MHz devices nearby. Туруктуу кубат булагын колдонуңуз.

If the issue persists after trying these solutions, please contact Loocam customer support.

7. Техникалык шарттар

Өзгөчөлүк	Деталь
Бренд	Loocam
Модел	B0BQ2R66S4
Зымсыз байланыш стандарты	900 MHz Radio Frequency (Wi-Fi HaLow 802.11ah)
Маалыматтарды өткөрүү ылдамдыгы	Секундасына 16 Мегабитке чейин
Жыштык тилкесинин классы	Бир тилкелүү (902MHz-928MHz)
Өзгөчөлүктөр	Кирүү чекитинин режими, WPS
Туташтыргыч түрү	RJ45
Шайкеш түзмөктөр	Personal Computer, NVR, IP Cameras, Network Switches
Диапазон	Up to 2000 feet (open areas), up to 350 feet (through one wall)
Аба ырайына каршылык	IP65 рейтинги
Иштөө температурасы	-5°F – 120°F (-20°C – 48°C)

8. Кепилдик жана колдоо

Loocam is committed to providing high-quality products and excellent customer service.

Кепилдик: Бул продукт 1 жылдык кепилдик менен келет.
Акчаны кайтаруу кепилдиги: 30 күндүк акчаны кайтарып берүү кепилдигинен жана акысыз кайтарып берүүдөн ырахат алыңыз.
Техникалык колдоо: Өмүр бою техникалык колдоо бар.
Онлайн колдоо: 24/7 online support is provided for any queries or assistance.

For further assistance, please visit the official Loocam webсайтка же кардарларды тейлөө тобуна кайрылыңыз.

Loocam B0BQ2R66S4