1. Киришүү
This manual provides essential information for the installation, operation, and maintenance of your new compatible refrigerator icemaker. This icemaker is designed as a replacement part for various Whirlpool refrigerator models, including GI6FDRXXY07, GI6SDRXXQ06, GI6FARXXF05, GI6SARXXF06, and GZ25FSRXYY2. Please read these instructions carefully before installation and use to ensure proper function and safety.
Note: This is a compatible replacement part and is not an OEM (Original Equipment Manufacturer) product. It is not covered under any OEM manufacturer's warranty. Any use of OEM brand names or model designations is solely for demonstrating compatibility.
2. Коопсуздук маалыматы
- Кубатты өчүрүү: Always disconnect power to the refrigerator before attempting any installation, maintenance, or repair. Failure to do so can result in serious injury or electrical shock.
- Кесиптик орнотуу сунушталат: If you are unsure about any step, it is recommended to seek assistance from a qualified appliance technician.
- Этияттык менен мамиле кылуу: The icemaker contains delicate components. Handle it carefully to avoid damage.
- Суу менен камсыздоо: Ensure the refrigerator's water supply is turned off before disconnecting any water lines.
- Аймакты таза кармоо: Keep the work area clear of obstructions and ensure adequate lighting during installation.
3. Кутуда эмне бар
Мазмунун кылдаттык менен ачып, бардык буюмдардын бар экенин жана бузулбаганын текшериңиз.
- One (1) Compatible Refrigerator Icemaker (Eight (8) Cube)
- One (1) Wiring Harness
- One (1) Metal Shut-off Arm (Bail Wire)
Сүрөт 1: View of the compatible icemaker, showing the main unit, wiring harness, and the metal shut-off arm (bail wire) detached.
Сүрөт 2: жогорудан ылдыйга view of the icemaker with the metal shut-off arm in place, ready for installation.
4. Орнотуу боюнча нускамалар
4.1. Баштоодон мурун
- Муздаткычтын электр розеткасынан суурулганын текшериңиз.
- Муздаткычка суу берүүнү өчүрүңүз.
- Gather necessary tools (e.g., screwdriver, pliers, flashlight).
4.2. Кадам-кадам орнотуу
- Access the Icemaker Compartment: Open the freezer door and locate the existing icemaker. Depending on your refrigerator model, you may need to remove a cover or shelf.
- Зымдарды ажыратыңыз: Carefully disconnect the wiring harness from the old icemaker. Note its orientation for reinstallation.
- Remove Old Icemaker: Unscrew any mounting screws or release clips holding the old icemaker in place. Gently slide or pull the old icemaker out of its position.
- Install New Icemaker: Position the new icemaker in the same location as the old one. Ensure it fits securely into the mounting brackets or screw holes.
- Зымдарды туташтыруу: Connect the provided wiring harness to the new icemaker and then to the refrigerator's electrical connector. Ensure a firm and secure connection.
- Install Shut-off Arm: Insert the metal shut-off arm (bail wire) into its designated slots on the icemaker. Ensure it can move freely up and down.
- Secure Icemaker: Fasten any mounting screws or engage clips to secure the new icemaker firmly in place.
- Суу жана электр кубатын калыбына келтирүү: Turn the water supply back on to the refrigerator. Plug the refrigerator back into the power outlet.
- Алгачкы текшерүү: Listen for the icemaker to fill with water. This may take a few minutes.
5. Иштөө нускамалары
Your new icemaker operates automatically. Once installed and connected to power and water, it will begin producing ice when the freezer temperature is below 20°F (-6.7°C).
- Алгачкы муз өндүрүү: New ice may take up to 24 hours to produce the first batch.
- Биринчи партияларды жокко чыгаруу: It is recommended to discard the first 3 batches of ice after installation to ensure any air or impurities from the water line are flushed out.
- Shut-off Arm: The metal shut-off arm (bail wire) controls ice production. When the ice bin is full, the arm will be pushed up by the ice, stopping production. Lowering the arm will resume ice production.
6. Техникалык тейлөө
- Тазалоо: Periodically clean the ice bin and the exterior of the icemaker with a mild soap and water solution. Rinse thoroughly and dry before placing back in the freezer. Do not use abrasive cleaners or harsh chemicals.
- Суу чыпкасы: Ensure your refrigerator's water filter is replaced regularly according to the manufacturer's recommendations to maintain ice quality.
- Суу түтүгүн текшерүү: Суу түтүгүнүн ийилген жерлерин, агып кетүүлөрүн же бузулууларын мезгил-мезгили менен текшерип туруңуз.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Icemaker not producing ice. |
|
|
| Муз өндүрүү жай жүрүп жатат. |
|
|
| Муздун өзгөчө даамы же жыты бар. |
|
|
| Icemaker is making unusual noises. |
|
|
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бөлүмдүн номери | W10882923 (replaces AP6037857, WPW10377151, WPW10377147, W10377147, W10377151, PS11769140) |
| Шайкеш муздаткыч моделдери | Whirlpool GI6FDRXXY07, GI6SDRXXQ06, GI6FARXXF05, GI6SARXXF06, GZ25FSRXYY2 |
| Ice Cube Capacity | Eight (8) Cube |
| Продукциянын өлчөмдөрү | Болжол менен 13"D x 6.5"W x 6.5"H |
| Материал | Металл жана пластик |
| Элемент Салмагы | Болжол менен 3 фунт |
| UPC | 054047533281 |
9. Кепилдик жана колдоо
As a compatible replacement part, this icemaker is not covered by the original equipment manufacturer's warranty. For specific warranty information, return policies, or technical support, please refer to the seller from whom you purchased this product.
Separate protection plans may be available for purchase through third-party providers. Please consult your purchase documentation for details on any such plans.
