Sigma Tile Cutter Art. 4FN 155 cm Instruction Manual

Introduction

Thank you for choosing the Sigma Art. 4FN Tile Cutter. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tile cutter. Please read these instructions carefully before use and keep them for future reference.

The Sigma Art. 4FN is a hand-powered tile cutter designed for precise and clean cuts on various tile types. It features an aluminum structure, a push-scoring mechanism, adjustable cutting thickness from 0-19 mm, a rotating breaking foot, and an adjustable measuring bar up to 155x155 cm.

Коопсуздук нускамалары

Always prioritize safety when operating any tool. Failure to follow these safety guidelines may result in injury or damage to the tool.

• Колдонмону окуу: Always read and understand this entire instruction manual before operating the tile cutter.
• Коргоочу шаймандарды кийүү: Ар дайым коопсуздук көз айнегин, кол капты жана бышык бут кийимди кошо алганда, тиешелүү жеке коргонуу каражаттарын (ЖКК) кийиңиз.
• Туруктуу иш бети: Ensure the tile cutter is placed on a stable, level, and non-slip work surface.
• Аймакты таза кармоо: Maintain a clean and well-lit work area. Remove any clutter that could interfere with operation.
• Колдонуудан мурун текшерүү: Before each use, inspect the tile cutter for any signs of damage or wear. Do not use if any components are damaged.
• Proper Tile Placement: Ensure the tile is correctly positioned and secured before scoring and breaking.
• Этияттык менен мамиле кылуу: The scoring wheel is sharp. Handle the scoring unit with care to avoid cuts.
• Балдар жана байкоочулар: Балдарды жана жанында жүргөндөрдү жумуш аймагынан алыс кармаңыз.
• Сактагыч: Store the tile cutter in a dry, secure location, out of reach of children.

Компоненттер бүттүview

Familiarize yourself with the main components of your Sigma Art. 4FN Tile Cutter:

• Aluminum Structure: The robust frame providing stability and support.
• NEX Handle: Ergonomically shaped handle, specifically designed for push-scoring.
• Scoring Unit: Contains the 16 mm diameter scoring wheel. It is clearly visible to the operator and features double springing for cushioned scoring of structured tiles. The scoring wheel rotates on a roller bearing, guided laterally by an anti-friction metal shell inserted into a CNC-milled housing, to prevent friction and lateral wear.
• Breaking Foot: A rotating mechanism used to apply pressure and break the tile along the scored line.
• Adjustable Measuring Bar: An orientable bar for precise measurement and positioning of tiles, up to 155x155 cm.
• Cutting Thickness Adjustment: Mechanism to adjust the cutting depth for tiles between 0-19 mm.

Image: The Sigma Art. 4FN Tile Cutter, showcasing its robust aluminum frame, scoring unit, and measuring bar. This image provides a general view буюмдун дизайны жана негизги өзгөчөлүктөрү.

Жайгашуу

The Sigma Art. 4FN Tile Cutter typically requires minimal assembly. Follow these steps to prepare your tool for use:

1. Пакеттен чыгаруу: Таңгактан бардык компоненттерди этияттык менен алып салыңыз. Жеткирүүдө кандайдыр бир бузулуулар бар-жогун текшериңиз.
2. Жайгашкан жери: Place the tile cutter on a sturdy, flat, and stable workbench or surface. Ensure it does not wobble.
3. Компоненттерди текшерүү: Verify that all included components, especially the scoring wheel and measuring bar, are present and undamaged. The scoring wheel (16 mm diameter) is included.
4. Adjust Measuring Bar: If not already attached, secure the adjustable measuring bar. Ensure it can rotate freely and lock into desired positions for accurate measurements.
5. Check Scoring Unit: Ensure the scoring unit moves smoothly along its track and the scoring wheel rotates freely.

Иштөө нускамалары

Follow these steps for effective and safe tile cutting:

1. Preparing the Tile

1. Өлчөө жана белгилөө: Accurately measure the tile and mark the desired cut line with a pencil or marker.
2. Плитканы жайгаштыруу: Place the tile on the cutter's bed, aligning the marked cut line with the scoring line indicator on the machine. Use the adjustable measuring bar to ensure precise alignment.
3. Adjust Cutting Thickness: Use the cutting thickness adjustment mechanism to set the appropriate depth for your tile (0-19 mm). This ensures optimal scoring pressure.

2. Scoring the Tile

1. Position Scoring Unit: Bring the scoring unit to the edge of the tile furthest from you.
2. Кысым колдонуу: Firmly grasp the NEX handle. Apply consistent, moderate downward pressure.
3. Плиткага упай топтоңуз: Push the scoring unit smoothly and steadily across the tile in a single, continuous motion towards you. A distinct scoring sound should be heard. Avoid multiple passes, as this can lead to a rougher edge.

3. Breaking the Tile

1. Position Breaking Foot: Once the tile is scored, position the rotating breaking foot directly over the scored line, typically near the edge of the tile closest to you.
2. Apply Breaking Pressure: Apply quick, firm, and even downward pressure on the NEX handle. The tile should snap cleanly along the scored line.
3. Кесилген бөлүктөрүн алып салуу: Carefully remove the two tile pieces. Be mindful of sharp edges.

Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө плитка кескичиңиздин узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.

• Тазалоо: After each use, clean the tile cutter to remove tile dust and debris. Use a brush or compressed air. Wipe down surfaces with a damp кездеме, андан кийин жакшылап кургатыңыз.
• Майлоо: Periodically apply a light lubricant to the scoring unit's guide rails to ensure smooth movement.
• Дөңгөлөктү текшерүү: Regularly inspect the 16 mm scoring wheel for wear or damage. A dull or chipped wheel will result in poor cuts. Replace the wheel as needed. Replacement wheels are available, including TIN-coated versions for enhanced durability.
• Сактагыч: Store the tile cutter in a clean, dry environment to prevent rust and corrosion.

Проблемаларды чечүү

Бул жерде кээ бир жалпы маселелер жана алардын мүмкүн болуучу чечимдери:

Техникалык шарттар

Technical details for the Sigma Art. 4FN Tile Cutter:

• Өндүрүүчү: Сигма
• Элемент коду: 4FN
• Модель номери: 4FN
• Продукциянын өлчөмдөрү: 195.58 x 48.26 x 30.48 см
• Элемент Салмагы: 26 килограмм
• Кубат түрү: Кол менен иштейт
• Элементтердин саны: 1
• Камтылган компоненттер: Scoring Wheel (16 mm diameter)
• Батареялар талап кылынат: Жок
• Cutting Thickness Adjustment: 0-19 мм
• Adjustable Measuring Bar: Up to 155x155 cm

Кепилдик жана колдоо

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or replacement parts, please contact Sigma customer service through their official webсайтына же сиздин ыйгарым укуктуу дилериңизге кайрылыңыз.