1. Киришүү
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your WASSERMANN 4" Septic Pump Water Submersible Effluent/Cistern Bottom Suction Pump, Model 4TMS5.8. Please read these instructions thoroughly before use and retain them for future reference. Proper adherence to these guidelines will ensure optimal performance and longevity of your pump.
2. Продукциянын өзгөчөлүктөрү
- Жогорку сапаттагы курулуш: Features a durable stainless steel body for corrosion resistance and extended lifespan.
- Натыйжалуу мотор: Equipped with a hermetically sealed motor that is thermally protected to prevent overheating, ensuring powerful and reliable operation.
- Built-in Capacitor Start: Simplifies installation and operation.
- Ар тараптуу колдонмо: Suitable for various water transfer needs including septic tanks, fish ponds, livestock watering, agricultural irrigation, and water fountain extraction.
- Premium Filtration Mesh: Stainless steel filtration mesh effectively filters impurities. For new wells with excessive granular sediment, an additional layer of gauze can be added in front of the inlet.
- Ийкемдүү орнотуу: Compatible with steel pipe wells, ash pipe wells, or soil wells. Steel pipe, hose, or plastic pipe can be used as the water pipe, provided pressure permits.
3. Коопсуздук маалыматы
Always prioritize safety during installation, operation, and maintenance. Failure to follow safety instructions can result in injury or equipment damage.
- Электр энергиясы насостун көлөмүнө дал келүүсүн текшериңизtage requirements (115V/60HZ).
- Кандайдыр бир тейлөө же орнотууну аткаруудан мурун ар дайым электр кубатын ажыратыңыз.
- The pump must be properly grounded to prevent electrical shock.
- Do not run the pump dry; it must be fully submerged in water during operation.
- Do not place the pump horizontally. It must be installed vertically.
- This pump is designed for clear water applications. Pumping sand or abrasive materials will clog and damage the pump. Consider installing a good filter for new wells with granular sediment.
- Keep children and unauthorized personnel away from the pump and its operating area.
4. Продукт бүтүп калдыview


Негизги параметрлер:
- Rated Voltage: 115V/60HZ
- Номиналдуу кубаттуулугу: 3/4HP (0.75 Horsepower)
- Максималдуу агым: 32 GPM (Мүнөтүнө Галлон)
- Макс башчысы: 174 Фут (Фут)
- Чыгуу: 1-1/4" FNPT
- Төмөнкүгө ылайыктуу: 4 inch well casings and bigger
- Материал: Дат баспаган болот
- Элемент Салмагы: 22 фунт
- Продукциянын өлчөмдөрү: 6"L x 6"W x 26"H
Ички компоненттери:




5. Орнотуу
5.1. Орнотууга чейинки текшерүүлөр
- скважина экендигин текшериңиз casing or cistern diameter is at least 4 inches.
- электр менен жабдууну камсыз кылуу voltage and frequency match the pump's specifications (115V/60HZ).
- Inspect the pump for any visible damage before installation.
- Prepare all necessary tools and materials, including appropriate piping, fittings, and a strong rope or cable for lowering the pump.
5.2. Connecting the Pump
- Apply thread seal tape to the 1-1/4" FNPT outlet of the pump.

Step 1: Apply thread seal tape to the pump's outlet. - Attach the appropriate discharge pipe (steel, hose, or plastic) to the pump's outlet. Secure it tightly with a hose clamp or suitable fitting.

Step 2: Connect the discharge pipe securely. - Attach a strong, non-corrosive rope or safety cable to the designated rope hole on the pump. This will be used to lower and retrieve the pump.

Step 3: Secure a rope or cable to the pump for lowering. - Ensure all connections are watertight and secure.

Step 4: Verify all connections are tight and leak-free.
5.3. Lowering the Pump
Carefully lower the pump into the well or cistern using the attached rope/cable. Ensure the pump remains vertical during the entire process. Avoid dropping the pump or allowing it to hit the sides of the well/cistern, which could cause damage.


5.4. Электр байланышы
Connect the pump's power cord to a properly grounded 115V/60HZ power outlet. Ensure the connection is protected from moisture. Consult a qualified electrician if you are unsure about electrical wiring.
6. Иштөө нускамалары
Once installed and connected, the pump is ready for operation. The built-in floats will activate the pump at specific water levels. Ensure the pump is always fully submerged when running.


7. Техникалык тейлөө
Regular maintenance ensures the longevity and efficient operation of your WASSERMANN septic pump.
- Үзгүлтүксүз текшерүү: Periodically check the pump, power cord, and discharge pipe for any signs of wear, damage, or blockages.
- Таза фильтрациялык тор: If the pump's performance decreases, the stainless steel filtration mesh may be clogged. Disconnect power, retrieve the pump, and clean the mesh.
- Абразивтерден качыңыз: Ensure the water being pumped is free of excessive sand, silt, or other abrasive materials to prevent impeller damage. Consider pre-filtration if necessary.
- Кыштоо: In freezing climates, remove the pump from the water source and store it in a frost-free location if it will not be used during winter. Drain all water from the pump and pipes.
8. Кыйынчылыктарды
Жалпы көйгөйлөр жана аларды чечүү жолдору үчүн төмөнкү таблицага кайрылыңыз.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Насос иштебейт | No power; tripped circuit breaker; faulty float switch; motor issue. | Check power supply and circuit breaker. Inspect float switch for obstruction. Consult a qualified technician for motor issues. |
| Насос иштейт, бирок суу чыкпайт | Pump not submerged; clogged inlet/outlet; air lock; damaged impeller. | Ensure pump is fully submerged. Clean inlet filter and discharge pipe. Prime the pump if necessary. Inspect impeller for damage. |
| Суунун аз агымы | Partially clogged filter/pipe; low water level; worn impeller. | Clean filter and pipes. Check water level in well/cistern. Inspect and replace worn impeller if needed. |
| Насос тез-тез айланып турат | Faulty float switch; small water source; check valve issue. | Inspect float switch. Ensure adequate water supply. Check for proper function of any external check valves. |
9. Техникалык шарттар

| Спецификация | Нарк |
|---|---|
| Бренд | ВАССЕРМАН |
| Модель номери | 4TMS5.8 |
| Күч | 3/4 HP (0.75 Horsepower) / 0.6 KW |
| Тtage | 115V AC |
| Жыштык | 60 Гц |
| Максималдуу агым ылдамдыгы | 32 GPM |
| Max Head | 174 FT |
| Чыгуу розеткасы | FNPT1-1/4" |
| саны Сtages | 5 |
| Материал | Дат баспаган болот |
| Элемент Салмагы | 22 фунт |
| Продукциянын өлчөмдөрү | 6"L x 6"W x 26"H |
| Электр шнурунун узундугу | 33 FT |
| Конденсатор | 45μF/250V |
| IP рейтинги | IP68 |
10. Кепилдик жана колдоо
For warranty information, technical support, or replacement parts, please contact WASSERMANN customer service or refer to the product's original packaging and purchase documentation. Keep your proof of purchase for warranty claims.