Introduction
This manual provides essential information for the setup and operation of your new Generic replacement remote control. This remote is specifically designed to be compatible with Intertek IF-40FSB, IF-50FSB, and IF-60FSB 3D Electric Fireplace Insert Heaters, offering a convenient way to control your fireplace functions.
The remote control is pre-programmed and requires no additional setup or pairing. Simply insert the correct batteries, and it will be ready for use.
Пакеттин мазмуну
- 1 x Жалпы алмаштыруучу пульт
Note: Batteries and additional instructions are not included in the package. Please refer to this manual for operational guidance.
Орнотуу: Батареяны орнотуу
Before using your remote control, you must install the batteries. This remote requires two (2) AAA batteries.
- Пульттун артындагы батарея отсегин табыңыз.
- Батарея бөлүмүнүн капкагын жылдырып ачыңыз.
- Insert two (2) AAA batteries, ensuring that the positive (+) and negative (-) ends align correctly with the markings inside the compartment.
- Батарея уясынын капкагын бекем жабыңыз.
Once batteries are installed, the remote control is ready for immediate use with your compatible Intertek electric fireplace.
Сүрөт: алдыңкы view of the Generic Replacement Remote Control. This image displays the layout of the six primary function buttons: Power, 'F' for function, Flame effect, Heat/Blower, Light, and Timer.
Иштөө нускамалары
Point the remote control directly at your Intertek electric fireplace insert to ensure proper communication. The remote operates on infrared (IR) technology, so ensure there are no obstructions between the remote and the fireplace's IR receiver.
| Баскыч сөлөкөтү | Функция | Description |
|---|---|---|
| ⑂ (Күч белгиси) | Күйгүзүү/өчүрүү | Каминдин жылыткычын күйгүзөт же өчүрөт. |
| F | Function / Flame Effect | Cycles through different flame effects or other functions depending on the fireplace model. |
| 🔥 (Flame Icon) | Flame Brightness/Mode | Adjusts the brightness of the flame effect or changes flame modes. |
| ∷ (Wavy Lines Icon) | Heat/Blower Control | Activates or adjusts the heater and blower settings. Press repeatedly to cycle through heat levels or turn off. |
| 💡 (Light Bulb Icon) | Light Control | Controls the internal lighting of the fireplace, such as ember bed lights or accent lights. |
| ⏱ (Clock/Timer Icon) | Таймер функциясы | Sets a timer for the fireplace to automatically turn off after a specified duration. Refer to your fireplace manual for specific timer settings. |
Проблемаларды чечүү
- Пульт жооп бербей жатат:
- Ensure new AAA batteries are correctly installed with proper polarity.
- Батареялардын түгөнүп калганын текшериңиз жана керек болсо алмаштырыңыз.
- Ensure there are no obstructions between the remote and the fireplace's infrared receiver.
- Make sure you are within the effective range of the fireplace's receiver.
- Үзгүлтүксүз иштөө:
- Бул батареянын кубаты аз экенин билдириши мүмкүн. Батареяларды алмаштырыңыз.
- Ensure a clear line of sight to the fireplace.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Продукт түрү | Алыстан башкарууну алмаштыруу |
| Шайкештик | Intertek IF-40FSB, IF-50FSB, IF-60FSB 3D Electric Fireplace Insert Heaters |
| Power Source | 2 x AAA Батареялар (киргизилген эмес) |
| Өлчөмдөр | Болжол менен 4.96 x 4.29 x 0.55 дюйм (12.6 x 10.9 x 1.4 см) |
| Элемент Салмагы | Болжол менен 0.528 унция (15 грамм) |
| Модель номери | 7c748f42-a80f-4ac1-aec5-4df0762316bc |
Кепилдик жана колдоо
As a generic replacement product, specific warranty details may vary. Please refer to the seller or your purchase documentation for any applicable warranty information or support inquiries.
For issues related to your Intertek electric fireplace, please consult the original fireplace manual or contact Intertek customer support directly.