AMTAST WJL-6000

AMTAST WJL-6000 Refrigerant Leak Detector User Manual

Model: WJL-6000

1. Киришүү

The AMTAST WJL-6000 is a portable halogen gas sniffer designed for precise detection of various refrigerant leaks. Utilizing advanced sensing technology, this device helps users accurately pinpoint leakage points of refrigerants such as CFCs, HFCs, and HCFCs. It features adjustable sensitivity, audible and visual alarms, and a flexible probe for accessing hard-to-reach areas.

AMTAST WJL-6000 Refrigerant Leak Detector

Image 1.1: The AMTAST WJL-6000 Refrigerant Leak Detector, showcasing its compact design and flexible probe.

2. Коопсуздук маалыматы

  • Аппаратты дайыма жакшы желдетилген жерде иштетиңиз.
  • Аппаратты экстремалдык температурага же тике күн нуруна калтырбаңыз.
  • Ensure correct battery polarity when installing batteries.
  • Аппаратты суудан жана нымдан алыс кармаңыз.
  • Do not attempt to repair or modify the device yourself. Refer to qualified personnel for service.
  • This device is designed for refrigerant leak detection only. Do not use it for detecting natural gas or other combustible gases.

3. Орнотуу

3.1 Батареяны орнотуу

  1. Аппараттын артындагы батарея бөлүкчөсүнүн капкагын табыңыз.
  2. Аны ачуу үчүн капкакты жылдырыңыз же ачыңыз.
  3. Бөлүмдүн ичинде көрсөтүлгөндөй, туура полярдуулукту (+/-) камсыз кылып, төрт (4) AAA щелочтуу батареяны салыңыз.
  4. Батарея уясынын капкагын бекем жабыңыз.

Note: Batteries are not included with the device.

AMTAST WJL-6000 Product Specifications and Battery Information

Image 3.1: Product specifications, including power supply details for 4 AAA alkaline batteries.

4. Иштөө нускамалары

4.1 Powering On and Warm-up

  1. Turn the device ON using the 'off/on' switch.
  2. Allow approximately 6 seconds for the device to warm up. During this time, the indicator light may flash.

4.2 Сезимталдыкты жөндөө

The WJL-6000 offers 7 adjustable sensitivity levels. Rotate the sensitivity knob to select the desired level. Higher numbers indicate higher sensitivity, allowing detection of smaller leaks.

AMTAST WJL-6000 Adjustable Sensitivity and Flexible Probe

Image 4.1: The sensitivity adjustment knob and the flexible probe for detecting leaks in various locations.

4.3 Leak Detection Process

  1. With the device warmed up, move the flexible probe slowly around suspected leak areas.
  2. When a refrigerant leak is detected, the device will emit an audible "siren" sound, and the indicator light will flash rapidly. The intensity of the sound and the flashing rate increase with higher concentrations of refrigerant.
  3. Use the flexible probe to reach difficult and hard-to-access areas, such as under pipes or behind machinery.
AMTAST WJL-6000 Operation Steps

Image 4.2: Visual representation of the leak detection process, showing the device in use.

5. Техникалык тейлөө

5.1 Тазалоо

Түзмөктү жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз, анткени алар түзмөккө зыян келтириши мүмкүн.asing же ички компоненттер.

5.2 Батареяны алмаштыруу

Replace batteries when the device's performance degrades or if the low battery indicator (if present) activates. Always use fresh AAA alkaline batteries.

5.3 Probe Care

Handle the flexible probe with care. Avoid sharp bends or excessive force that could damage the probe or its connection to the main unit.

6. Кыйынчылыктарды

  • Түзмөк күйбөйт: Батарея орнотулганын текшерип, батарейкалардын жаңы экенин текшериңиз.
  • Эч кандай аныктоо же дал келбеген көрсөткүчтөр: Ensure the probe is clean. Adjust sensitivity to a higher level. Allow sufficient warm-up time.
  • Жалган сигналдар: Reduce sensitivity. Ensure the operating environment is free from other halogenated compounds that might trigger the sensor.
  • Weak alarm sound/light: Батареяларды алмаштырыңыз.

7. Техникалык шарттар

ӨзгөчөлүкСпецификация
Иштөө температурасы0°Cден 52°Cге чейин (30°F—125°F)
Максималдуу сезгичтик0.21 oz/yr (6 gr/yr) for all halogenated refrigerants
Батареянын иштөө мөөнөтүApproximately 50 hours (normal use)
Жооп убактысыImmediate (within 3 seconds)
Жылытуу убактысыБолжол менен 6 секунд
Fixed Probe Length17 см (6.5 дюйм)
Unit Dimensions (H x D x W)22.9 см x 6.5 см x 6.5 см (9.02" x 2.56" x 2.56")
Электр камсыздоо6V DC, 4 AAA alkaline batteries (not included)
Сенсор түрүCorona Sensor
ОйготкучУгуу жана визуалдык
Detected RefrigerantsCFCs (e.g., R11, R12, R13), HCFCs (e.g., R22, R123, R124), HFCs (e.g., R23, R134a, R404A, R407C, R410A)

8. Кепилдик жана колдоо

8.1 Өндүрүүчүнүн Кепилдиги

The AMTAST WJL-6000 Refrigerant Leak Detector comes with a One Year Warranty from the manufacturer, AMTAST. Please retain your proof of purchase for warranty claims.

8.2 Кардарларды колдоо

For technical assistance, troubleshooting, or warranty inquiries, please contact AMTAST customer support. You can find more information and contact details by visiting the official AMTAST store or webсайт.

Visit the AMTAST Store

© 2024 AMTAST. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.