1. Киришүү
This manual provides detailed instructions for the safe installation, operation, and maintenance of your LEDONE 8FT LED Vapor Tight Light. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for demanding environments requiring high resistance to water, dust, and corrosion, such as parking garages, car washes, cold storage, and industrial facilities.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Электр шок коркунучу. Орнотуудан же тейлөөдөн мурун электр энергиясын өчүрүңүз.
- Installation must be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and local codes.
- камсыз кылуу voltage is compatible with the fixture's requirements (120-277Vac).
- Do not handle energized fixtures with wet hands or while standing on wet or damp беттер.
- Аппаратты өзгөртүүгө же демонтаж кылууга аракет кылбаңыз. Ичинде колдонуучу тейлей турган бөлүктөр жок.
- Орнотуу учурунда тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз.
- Жыгылып кетпеш үчүн арматура бекем орнотулганын текшериңиз.
3. Пакеттин мазмуну
Орнотууну улантуудан мурун бардык компоненттер бар экенин жана бузулбаганын текшериңиз.
- LEDONE 8FT LED Vapor Tight Light Fixture
- Mounting Hardware (clips, screws, anchors)
- Көрсөтмө (бул документ)
4. Орнотуу жана орнотуу
4.1. Алдын ала орнотуу
- Электр кубатын өчүрүү: Locate the circuit breaker or fuse box and turn off the power supply to the installation area. Verify power is off using a voltage сыноочу.
- Таңылганын ачуу: Carefully remove the fixture from its packaging. Inspect for any shipping damage.
- Wat тандаңызtage and Color Temperature (CCT): Before mounting, adjust the wattage and CCT switches located on the fixture. These switches allow you to select between 60W, 80W, or 100W and 3500K, 4000K, or 5000K. Make your selection based on your lighting requirements.
Image: Product dimensions and location of wattage/CCT selection switches.
4.2. Арматураны орнотуу
The fixture is designed for surface mounting. Use the provided mounting clips and hardware.
- Mark the desired mounting locations on the ceiling or wall. Ensure the marks are level and spaced appropriately for the fixture's length.
- Drill pilot holes at the marked locations. Insert wall anchors if mounting into drywall or masonry.
- Secure the mounting clips to the surface using the provided screws.
- Snap the LED vapor tight fixture into the mounted clips, ensuring it is firmly seated.
Сүрөт: Мисample of surface mounting in a facility.
Image: Detail of the linkable design feature.
4.3. Электр зымдары
This fixture supports 0-10V dimming. Follow the wiring diagram below and local electrical codes.
- туташтыруу Кара арматурадан зым Сап (L) зым электр булагы.
- туташтыруу Ак арматурадан зым Нейтралдуу (N) зым электр булагы.
- туташтыруу Жашыл арматурадан зым Жер (GND) зым электр булагы.
- 0-10V күңүрттөө үчүн: туташтырыңыз Кызгылт көк арматурадан зым Dim+ wire from the 0-10V dimmer. Connect the Кызгылт/Боз арматурадан зым Дим- wire from the 0-10V dimmer.
- Ensure all connections are secure using appropriate wire connectors.
Note: If 0-10V dimming is not used, cap the purple and pink/gray wires individually with wire nuts.
5. Иштөө нускамалары
- Күйгүзүү: Once installation and wiring are complete, restore power to the circuit at the breaker or fuse box. The fixture should illuminate.
- алсыздатуу: If connected to a compatible 0-10V dimmer, adjust the dimmer control to achieve the desired light output level.
- Ватtage and CCT Adjustment: Ватtage and CCT are set via internal switches during installation. These are not typically adjusted during normal operation. If changes are needed, disconnect power before accessing the switches.
6. Техникалык тейлөө
The LEDONE Vapor Tight Light is designed for long-term, low-maintenance operation. Regular cleaning can help maintain optimal light output.
- Тазалоо: Тазалоодон мурун электрди өчүрүңүз. жумшак колдонуу, damp cloth with a mild, non-abrasive cleaner to wipe the exterior of the fixture. Do not use harsh chemicals or abrasive pads, as these can damage the finish or lens.
- Текшерүү: Periodically inspect the fixture and mounting hardware for any signs of damage, loose connections, or wear. Address any issues promptly.
- Колдонуучу тейлей турган бөлүктөр жок: The LED light source and driver are integrated components. Do not attempt to open or repair the fixture. Contact qualified personnel for any issues beyond basic cleaning and inspection.
Image: The IP65 waterproof rating ensures durability in wet conditions.
7. Кыйынчылыктарды
Before performing any troubleshooting, ensure power is disconnected at the circuit breaker.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Fixture does not illuminate. | Электр энергиясы жок. Туура эмес зым. Бузулган арматура. |
Автоматтык өчүргүчтү/ сақтандыргычты текшериңиз. Бардык зым туташууларынын бекем жана туура экенин текшериңиз. Contact customer support if wiring is correct and power is present. |
| Жарык чыгаруу өтө төмөн же өтө жогору. | Туура эмес ватtage жөндөө. Диммер жөндөө. Шайкеш келбеген диммер. |
Wat текшериңизtage switch setting (power off). Adjust 0-10V dimmer. Ensure dimmer is 0-10V compatible. |
| Жарык жылтылдайт. | Бошогон зымдар байланышы. Шайкеш келбеген диммер. Кубаттын өзгөрүшү. |
Бардык зым байланыштарын текшериңиз. Ensure dimmer is 0-10V compatible. Электр менен камсыздоонун туруктуулугун текшерүү үчүн электрикке кайрылыңыз. |
8. Техникалык шарттар
| Параметр | Нарк |
|---|---|
| Модел | 8FT LED Vapor Tight Light |
| Бренд | LEDONE |
| Ватtage | 60W / 80W / 100W (Selectable) |
| Түс температурасы (CCT) | 3500K / 4000K / 5000K (Тандоого болот) |
| Киргизүү көлөмүtage | 120-277Vac |
| Караңгылык | 0-10V Өнүгүү |
| Lumen Output | 11442 люменге чейин (100 Вт кубаттуулукта) |
| Beam Angle | 110° |
| Өмүр бою | 50,000 саат |
| IP рейтинги | IP65 (Суу өткөрбөйт жана чаң өткөрбөйт) |
| Сертификаттар | UL Listed, DLC Listed, NSF Listed |
| Турак жай материалы | PC Housing with White Cover |
| Линзанын материалы | Муздак PC |
| Өлчөмдөрү (L x W x Y) | 95.98" x 2.61" x 2.42" (2438 мм x 66.4 мм x 61.4 мм) |
Image: Key features and certifications of the LEDONE Vapor Tight Light.
9. Кепилдик маалыматы
LEDONE products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty. Please refer to the product packaging or the official LEDONE webКепилдиктин белгилүү бир шарттары жана эрежелери үчүн сайтты караңыз. Кепилдик боюнча дооматтар үчүн сатып алганыңызды тастыктаган документти сактап коюңуз.
10. Кардарларды колдоо кызматы
If you have any questions, require technical assistance, or need to report an issue, please contact LEDONE customer support:
- Webсайт: Visit the LEDONE Store on Amazon (for general inquiries)
- Электрондук почта: Продукциянын таңгагына же расмий маалыматка кайрылыңыз website for direct support email.
- Телефон: Продукциянын таңгагына же расмий маалыматка кайрылыңыз website for direct support phone number.
Please have your product model number (8FT LED Vapor Tight Light) and proof of purchase ready when contacting support.