Thermalright Frozen Prism 360 Black Liquid CPU Cooler

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Thermalright Frozen Prism 360 Black Liquid CPU Cooler. Please read this manual thoroughly before installation to ensure proper setup and optimal performance. This all-in-one (AIO) liquid cooler is designed to provide efficient cooling for various Intel and AMD CPU sockets.

Пакеттин мазмуну

Verify that all components are present in the package before proceeding with installation. If any parts are missing or damaged, please contact customer support.

• Frozen Prism 360 Black AIO Cooler (Radiator, Pump/Waterblock, Tubes)
• 3x TL-E12B V2 120mm PWM Fans
• Mounting Hardware for Intel Sockets (LGA1851/1700/1200/115X/2011)
• Mounting Hardware for AMD Sockets (AM4/AM5)
• Термикалык паста
• Желдетүүчү бурамалар жана Радиатордун бурамалары
• Желдеткич бөлгүч кабели (эгер кошулган болсо)
• User Manual

Техникалык шарттар

Коопсуздук маалыматы

• Орнотуудан мурун компьютериңиздин өчүрүлгөнүн жана розеткадан суурулганын текшериңиз.
• Компоненттерге зыян келтирбөө үчүн этияттык менен кармаңыз.
• Refer to your motherboard manual for specific header locations and clearances.
• Do not attempt to open or modify the AIO unit, as this may void the warranty and cause leaks.
• Балдар жетпеген жерде сактаңыз.

Орнотуу боюнча колдонмо

Follow these steps carefully for proper installation. The process may vary slightly depending on your specific motherboard and PC case.

1. Системаңызды даярдаңыз

1. Компьютериңизди өчүрүп, электр кабелин сууруп алыңыз.
2. Энелик платага жана процессор аймагына кирүү үчүн компьютериңиздин корпусун ачыңыз.
3. Процессордун бардык муздаткычтарын алып салыңыз. Эски термопастаны кетирүү үчүн процессордун бетин изопропил спирти менен кылдат тазалаңыз.

2. Радиаторду жана желдеткичтерди орнотуңуз

Determine the optimal mounting location for the 360mm radiator in your PC case (e.g., top, front). Ensure adequate clearance for the radiator and fans.

Image: The Thermalright Frozen Prism 360 Black AIO cooler installed in a PC case. The 360mm radiator with its three fans is mounted at the top of the case, while the waterblock is securely attached to the CPU on the motherboard. This illustrates a typical installation configuration.

4. Attach the three 120mm TL-E12B V2 fans to the radiator using the provided fan screws. Ensure the fan airflow direction is appropriate for your case's cooling strategy (typically exhausting air out of the case if top-mounted, or intaking if front-mounted). The fans feature shock-absorbing silicone pads to minimize noise.
5. Mount the radiator with attached fans into your chosen location in the PC case using the longer radiator screws.

3. Install Waterblock on CPU

The waterblock features an aluminium casing with a mirror finish panel and addressable RGB lighting. It also has a magnetic top plate for easy customization.

Сүрөт: жакын план view of the Thermalright Frozen Prism 360 Black waterblock mounted on a CPU. The image highlights the secure mounting mechanism with visible screws and the vibrant addressable RGB lighting emanating from the waterblock's casing.

For Intel Sockets (LGA1851/1700/1200/115X/2011):

1. Attach the appropriate Intel backplate to the rear of your motherboard.
2. Install the Intel standoffs through the motherboard mounting holes.
3. CPU'ңуздун ортосуна бир аз өлчөмдөгү термикалык паста сүйкөңүз.
4. Carefully place the waterblock onto the CPU, aligning the mounting holes.
5. Secure the waterblock with the Intel thumb screws, tightening them in a diagonal pattern until snug. Do not overtighten.

For AMD Sockets (AM4/AM5):

1. Remove the plastic retention clips from the stock AMD backplate, but keep the backplate in place.
2. Install the AMD standoffs into the stock backplate's mounting holes.
3. CPU'ңуздун ортосуна бир аз өлчөмдөгү термикалык паста сүйкөңүз.
4. Carefully place the waterblock onto the CPU, aligning the mounting holes.
5. Secure the waterblock with the AMD thumb screws, tightening them in a diagonal pattern until snug. Do not overtighten.

4. Кабелдерди туташтырыңыз

6. Connect the 4-pin PWM fan cables from the TL-E12B V2 fans to the fan header(s) on your motherboard. If using a fan splitter, connect all fans to the splitter and then the splitter to a single motherboard fan header (e.g., CPU_FAN or AIO_PUMP).
7. Connect the pump's 3-pin or 4-pin power cable to the dedicated AIO_PUMP or CPU_OPT header on your motherboard. Ensure it receives full power (usually 12V DC).
8. Connect the Addressable RGB (ARGB) cable from the waterblock to a compatible 5V ARGB header on your motherboard. Refer to your motherboard manual for the correct header location.

5. Акыркы текшерүүлөр

9. Коопсуз экенин текшерүү үчүн бардык байланыштарды эки жолу текшериңиз.
10. Ensure no cables are interfering with fan blades or other moving parts.
11. Компьютериңизди жабыңыз.
12. Plug in the power cable and power on your computer.

Операция

Once installed, the Thermalright Frozen Prism 360 Black operates automatically. The PWM fans will adjust their speed based on CPU temperature, and the pump will run at its specified speed (2800 RPM ±10%) to circulate coolant.

• Желдетүүчү башкаруу: The TL-E12B V2 fans are PWM controlled. You can adjust fan curves in your motherboard's BIOS/UEFI settings or through compatible software to optimize for noise and cooling performance.
• RGB жарыктандыруу: The waterblock's addressable RGB lighting can be controlled via your motherboard's RGB software (if compatible) or a dedicated RGB controller (not included).
• Алгачкы ишке киргизүү: During the first few minutes of operation, you might hear some gurgling sounds as air bubbles are purged from the loop. This is normal and should subside.

Техникалык тейлөө

The Thermalright Frozen Prism 360 Black is a closed-loop system and requires minimal maintenance. However, periodic cleaning is recommended to ensure optimal performance.

• Чаңды тазалоо: Аба агымына жана муздатуу эффективдүүлүгүнө тоскоол боло турган чаңдын топтолушуна жол бербөө үчүн радиатордун канаттарын жана желдеткичтин бычактарын мезгил-мезгили менен тазалап туруңуз. Кысылган абаны же жумшак щетканы колдонуңуз.
• Түтүктөрдү текшерүү: The water tubes are protected by polymer sleeves for low liquid evaporation. Regularly inspect the tubes for any signs of kinks, damage, or leaks.
• Кайра толтурууга болбойт: Do not attempt to refill the liquid or open the AIO unit. It is a sealed system.

Проблемаларды чечүү

If you encounter issues with your cooler, refer to the following common problems and solutions:

Problem: High CPU Temperatures

• Ensure the waterblock is securely mounted to the CPU and making good contact.
• Термикалык паста туура колдонулганын текшериңиз.
• Check if the pump is running (you might feel a slight vibration or hear a low hum). Ensure the pump power cable is connected to a continuously powered header (AIO_PUMP or CPU_OPT) in the BIOS.
• Confirm that all fans are spinning and connected properly.
• Радиатордун сүзгүчтөрүндөгү чаңды тазалаңыз.
• Check fan curves in BIOS to ensure fans are ramping up with temperature.

Problem: Fans Not Spinning / RGB Not Lighting Up

• Verify all fan and RGB cables are securely connected to the correct headers on the motherboard.
• Ensure the 5V ARGB header is enabled in your motherboard's BIOS/UEFI.
• Check your motherboard's RGB software for control settings.
• If using a fan splitter, ensure it is functioning correctly.

Problem: Unusual Noise (Gurgling, Grinding)

• Gurgling sounds during initial startup are normal as air purges. If persistent, try gently tilting your PC case to help move air bubbles.
• Grinding or rattling noises could indicate a fan issue. Check if any cables are hitting fan blades.
• If the pump is making a loud grinding noise, contact customer support.

Кепилдик жана колдоо

Thermalright products are manufactured to high-quality standards. For warranty information, technical support, or to report any issues, please refer to the official Thermalright webсайтка же сатуучуга кайрылыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.