Jectse 2.4GHz 4-Channel RC Gyro Receiver Instruction Manual

1. Продукт бүтүп калдыview

The Jectse 2.4GHz 4-Channel RC Gyro Receiver is designed for remote control vehicles such as cars and boats. It features a single antenna bidirectional transmission system and integrates a high-performance gyroscope for enhanced control. This receiver is compatible with AFHDS 3 transmitters, including Flysky NB4, Noble Lite, and Noble Pro series.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• Bidirectional transmission with a single antenna.
• Support for PWM, PPM, i BUS2, S.BUS, and J BUS data output.
• Compatibility with AFHDS 3 protocol transmitters.
• Built-in high-performance gyroscope.
• Integrated BVD (Battery Voltage Detection) function.
• PPX6 splash-proof rating.

Image 1.1: The Jectse RC Gyro Receiver highlighting its multi-function capabilities, including external single antenna with back propagation, built-in high-performance gyroscope, integrated BVD battery voltage detection, and PPX6 splash-proof design.

2. Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

• 1 x Gyro Receiver
• 1 x Байланыш кабели
• 1 х Инструкция (бул документ)
• 1 х Пластик куту

Image 2.1: The Jectse RC Gyro Receiver shown alongside its included connection cable.

3. Техникалык шарттар

Image 3.1: The Jectse RC Gyro Receiver, illustrating its single antenna bidirectional transmission system and the various data output types supported (PWM, PPM, i BUS, S.BUS, i BUS2).

4. Орнотуу жана орнотуу

Follow these steps to properly install and set up your Jectse RC Gyro Receiver:

1. Физикалык орнотуу: Mount the receiver securely in your RC vehicle (car or boat), ensuring it is protected from excessive vibration and moisture.
2. Кубат туташуу: Connect the receiver to a power source within the specified input power range of 3.5-9 V DC.
3. Transmitter Compatibility: Ensure your transmitter uses the AFHDS 3 protocol. Compatible transmitters include Flysky PL18, NB4, NB4 Lite, and other Noble series transmitters.
4. Байланыш процесси:
   • Алуучуну күйгүзүңүз.
   • басып, кармап туруңуз Байлоо кабыл алгычтагы баскыч.
   • Initiate the binding process on your AFHDS 3 compatible transmitter according to its specific instructions.
   • Байлангандан кийин, кабыл алгычтын индикатор жарыгы ийгиликтүү туташууну тастыктайт.
5. Data Output Connections: Connect your servos, ESC, and other components to the appropriate PWM, PPM, i BUS2, S.BUS, or J BUS ports on the receiver.
6. BVD Port Connection: If using the Battery Voltage Detection (BVD) function, connect the provided cable to the BVD port гана. Do not connect other components to this port.
7. Gyroscope Function (Noble Series): For Noble series transmitters, you may need to enable the gyroscope function (INr4 GYB) through your transmitter's settings menu. Refer to your transmitter's manual for detailed instructions.

Сүрөт 4.1: Жакын план view of the Jectse RC Gyro Receiver, showing the various ports for connections and the "Bind" button for pairing with a transmitter.

Image 4.2: The connection cable, with a clear warning to connect it to the BVD port only for battery voltage аныктоо.

5. Иштөө нускамалары

Once the receiver is successfully installed and bound to your transmitter, you can begin operation:

• Негизги башкаруу: Use your AFHDS 3 transmitter to control your RC vehicle. The receiver processes signals for steering, throttle, and other functions via the connected servos and ESC.
• Гироскоптун функциясы: The built-in gyroscope provides stability and improved handling, especially for drift cars and other high-performance vehicles. Adjust gyroscope sensitivity via your transmitter if supported.
• Батарея Voltage Detection (BVD): If the BVD cable is connected, your transmitter can display the real-time battery voltage of your RC vehicle, allowing you to monitor power levels during operation.
• Маалымат чыгаруу: The receiver supports various data output protocols. Ensure your connected devices (e.g., flight controllers, telemetry modules) are configured to receive data from the appropriate port (PWM, PPM, i BUS2, S.BUS, J BUS).

Image 5.1: The Jectse RC Gyro Receiver, detailing its compatibility with AFHDS 3 transmitters (PL18, NB4, NB4 Lite) and its suitability for various RC applications including drift cars, recreational vehicles, F1, and linear acceleration cars. It also notes the ability to enable gyroscope function for Noble series.

6. Техникалык тейлөө

Proper maintenance ensures the longevity and reliable performance of your receiver:

• Тазалоо: Regularly clean the receiver with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• Экологиялык шарттар: Operate and store the receiver within the specified temperature range (-10°C to +60°C) and humidity range (20%-95%).
• Нымдуулуктан коргоо: While the receiver is PPX6 splash-proof, avoid submerging it in water or exposing it to heavy rain. Ensure all connections are dry before powering on.
• Туташуу бүтүндүгү: Periodically check all wire connections for looseness or damage. Secure any loose connections.
• Программалык камсыздоонун жаңыртуулары: The receiver supports online updates. Check the Jectse official website or your transmitter's manufacturer for available firmware updates to ensure optimal performance and access to new features.

7. Кыйынчылыктарды

If you encounter issues with your receiver, refer to the following common troubleshooting steps:

• Кубат жок:
  • Check power source connection and battery charge.
  • Киргизүүнү камсыз кылуу томtage is within 3.5-9 V DC.
• Байланыштыруудагы ката:
  • Ensure both receiver and transmitter are in binding mode.
  • Verify your transmitter is AFHDS 3 compatible.
  • Move closer to the transmitter during the binding process.
  • Башка 2.4 ГГц түзмөктөрүнүн кийлигишүүсүн текшериңиз.
• Loss of Signal/Intermittent Control:
  • Check antenna placement; ensure it is not obstructed or damaged.
  • Verify the transmitter battery level.
  • Жакын жерде эч кандай күчтүү кийлигишүү булактары жок экенин текшериңиз.
• Gyroscope Not Functioning (Noble Series):
  • Confirm the gyroscope function (INr4 GYB) is enabled in your transmitter's settings.
  • Refer to your transmitter's manual for specific gyroscope calibration or adjustment procedures.
• Туура эмес маалымат чыгаруу:
  • Verify that connected devices are configured for the correct data protocol (PWM, PPM, i BUS2, S.BUS, J BUS).
  • Check wiring connections to ensure they are correctly plugged into the designated ports.

If problems persist, consult the support resources mentioned in the next section.

8. Кепилдик жана колдоо

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Jectse customer service directly. Keep your proof of purchase for warranty claims.

Кошумча жардам алуу үчүн, сиз да барсаңыз болот Jectse Store on Amazon.