VIMIN 6-порттуу 2.5G PoE которгучу (VM-S250402P модели) колдонуучунун колдонмосу

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your VIMIN 6-Port 2.5G PoE Switch (Model VM-S250402P). This unmanaged switch is designed to enhance network performance with its high-speed ports and Power over Ethernet capabilities. Please read this manual thoroughly before using the device.

Figure 1: VIMIN 6-Port 2.5G PoE Switch (Model VM-S250402P)

2. Пакеттин мазмуну

Verify that all items are present and in good condition. If any item is missing or damaged, please contact your vendor.

• 1x VIMIN 6-Port 2.5G PoE Switch (Model VM-S250402P)
• 1x Кубат кабели
• 4x Ethernet Cables (Cat 6 or above, approximately 1 meter each)
• 1x Колдонуучунун колдонмосу

3. Продукт бүтүп калдыview

3.1 алдыңкы панели

The front panel features the RJ45 ports, SFP ports, LED indicators, and the VLAN switch.

Figure 2: Front Panel Layout and Typical Connection Scenario

3.2 Арткы панель

The rear panel typically contains the power input and ventilation openings.

Figure 3: Rear Panel with Ventilation and Power Input

3.3 LED көрсөткүчтөрү

The LED indicators provide real-time status of the switch's operation.

Figure 4: LED Indicator Guide

4. Орнотуу жана орнотуу

The VIMIN 6-Port 2.5G PoE Switch is designed for plug-and-play operation, requiring no complex configuration.

4.1 Туташуунун негизги кадамдары

1. Туташуу кубаты: Plug the power cable into the switch's power input and then into a power outlet.
2. Түзмөктөрдү туташтыруу: Connect your network devices (e.g., NAS, APs, computers, routers) to the RJ45 ports using Ethernet cables. For 10Gbps connectivity, insert compatible SFP modules into the SFP ports and connect fiber optic cables.
3. Байланышты текшерүү: Check the LED indicators to ensure proper link and activity.

Figure 5: Plug and Play Setup Guide

4.2 SFP Module Installation

The switch supports adaptive 1G/2.5G/10G optical fiber modules (modules are NOT included and must be purchased separately).

Figure 6: SFP Module Insertion

5. Операция

This unmanaged switch operates automatically once connected. It supports IEEE 802.3af/at standards, providing up to 30W of power per port with a total PoE budget of 65W. It does not support passive PoE.

5.1 One-Key VLAN Function

The switch features a One-Key VLAN mode. When activated, ports 1-4 are isolated from each other but maintain communication with the SFP ports. This enhances network security and optimizes bandwidth utilization by preventing direct communication between connected devices on ports 1-4.

Figure 7: One-Key VLAN Operation

6. Техникалык тейлөө

To ensure optimal performance and longevity of your VIMIN PoE switch, follow these maintenance guidelines:

• Курчап турган чөйрө: Operate the switch within the recommended temperature range of 14°F to 131°F (-10°C to 55°C).
• Тазалоо: Аппаратты таза жана чаңдан алыс кармаңыз. Тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз.
• Вентиляция: Ensure proper airflow around the device. The fanless design relies on natural convection for heat dissipation.
• Күч: Берилген кубат адаптерин гана колдонуңуз.

Figure 8: Durable and Stable Design Features

7. Кыйынчылыктарды

If you encounter issues with your VIMIN PoE switch, refer to the following common problems and solutions:

• Кубат жок: Ensure the power cable is securely connected to both the switch and the power outlet. Verify the power outlet is functional.
• Шилтеме жарыгы жок: Check if the Ethernet cable is properly connected to both the switch port and the device. Ensure the connected device is powered on and functioning correctly. Try a different cable or port.
• PoE түзмөгү күйбөй жатат: Confirm that the connected device is PoE compatible (IEEE 802.3af/at). Check the PoE power budget (65W total, 30W per port) to ensure it's not exceeded. Ensure the PoE Link LED is on.
• Жай тармак ылдамдыгы: Verify that all connected devices and cables support 2.5G or 10G speeds. Ensure you are using Cat6 or higher Ethernet cables for optimal performance.
• VLAN Isolation Issue: If devices on ports 1-4 are communicating directly, ensure the One-Key VLAN switch is in the 'ON' position.

If the problem persists, please contact VIMIN technical support.

8. Техникалык шарттар

9. Кепилдик жана колдоо

VIMIN provides a one-year warranty for this product, ensuring reliability, quality, and performance. We also offer lifetime technical support to assist you with any questions or issues.

For technical assistance or warranty claims, please contact VIMIN support:

• Электрондук почта: support@vimintech.com

10. Продукт видеосу

Көрүү үчүн бул видеону көрүңүзview of the VIMIN 6-Port 2.5G PoE Switch and its features.