Lemorele R15 RX

Lemorele R15 RX Wireless HDMI Extender User Manual

Model: R15 RX

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your Lemorele R15 RX Wireless HDMI Extender. This device allows for wireless transmission of HDMI video and audio signals over distances up to 656 feet (200 meters), supporting configurations where one transmitter (TX) can be paired with up to four receivers (RXs). It features LoopOutput, KVM functionality, and IR pass-through for enhanced control. Please read this manual thoroughly before use to ensure proper setup and optimal performance.

2. Негизги өзгөчөлүктөрү

  • Wireless HDMI Extension: Transmits HDMI signals wirelessly up to 656 feet (200 meters).
  • Көп кабыл алгычты колдоо: One transmitter (TX) can be paired with up to four receivers (RXs) simultaneously.
  • LoopOutput: HDMI output on the transmitter for local monitoring.
  • KVM функциясы: Supports Keyboard, Video, and Mouse extension.
  • IR Pass-through: Allows control of the source device from the receiver location.
  • 5G Streaming: Utilizes 5G wireless technology for stable video and audio transmission.
  • Кеңири шайкештик: Compatible with various HDMI source devices and displays including TVs, monitors, projectors, cable boxes, Blu-ray players, gaming consoles (PS5/4/3, Xbox), computers, and laptops.

3. Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

  • 1 x HDMI Receiver (RX)
  • 2 x Antennae
  • 1 x HDMI кабели
  • 1 x IR IN Cable
  • 1 x Аудио кабели
  • 1 х кубат адаптери
  • 1 x User Manual

4. Орнотуу нускамалары

4.1 Initial Pairing Steps

  1. Ensure both the transmitter (TX) and receiver (RX) units are powered off.
  2. Connect the HDMI output of the receiver (RX) to the HDMI input of the transmitter (TX) using an HDMI cable. This direct connection is for initial pairing only.
  3. Өткөргүч жана кабыл алуучу блокторду күйгүзүңүз.
  4. Observe the STA (green light) indicator on both the receiver and transmitter. After a few seconds, the STA lights on both units will illuminate steadily, indicating successful pairing.
  5. Once paired, disconnect the HDMI cable used for pairing.

4.2 Стандарттык туташуу

After successful pairing, proceed with the standard connection as follows:

  1. Transmitter (TX) Setup:
    • Connect your HDMI source device (e.g., computer, Blu-ray player) to the HDMI IN port of the transmitter using an HDMI cable.
    • (Optional) If local monitoring is desired, connect a display to the HDMI OUT (LoopOutput) port of the transmitter.
    • Connect the power adapter to the transmitter and plug it into a power outlet.
    • Attach the antennae to the transmitter unit.
  2. Receiver (RX) Setup:
    • Connect your display device (e.g., TV, monitor, projector) to the HDMI OUT port of the receiver using an HDMI cable.
    • Connect the power adapter to the receiver and plug it into a power outlet.
    • Attach the antennae to the receiver unit.
    • (Optional) For IR pass-through, connect the IR IN cable to the receiver and position the IR emitter near the IR sensor of your source device.
    • (Optional) For KVM functionality, connect your keyboard and mouse to the USB ports on the receiver.
Diagram showing one HDMI transmitter (TX) wirelessly connected to four HDMI receivers (RXs), each connected to a display.

1-сүрөт: Мисample setup demonstrating one transmitter (TX) paired with four receivers (RXs) for multi-display output. The TX unit is connected to a source (not shown) and wirelessly broadcasts to multiple RX units, each connected to a separate display.

4.3 Multi-Receiver Configuration (1 TX to 4 RXs)

The Lemorele R15 RX system supports connecting one transmitter to up to four receivers. Follow the "Initial Pairing Steps" for each receiver you wish to pair with the transmitter. Once all receivers are paired, they will simultaneously receive the signal from the single transmitter.

5. Иштөө нускамалары

5.1 Күйгүзүү/өчүрүү

  • To power on, connect the power adapter to the unit and a power outlet. The unit will automatically power on.
  • To power off, disconnect the power adapter from the unit.

5.2 Сигналдарды берүү

Once all connections are made and units are powered on, the transmitter will automatically detect the HDMI input and begin broadcasting the signal. The receivers will automatically detect the wireless signal and display the content on the connected monitors. Ensure that the source device is outputting a compatible HDMI signal.

5.3 IR алыстан башкаруу

If you have connected the IR IN cable to the receiver and positioned the IR emitter correctly near your source device's IR sensor, you can use your source device's remote control from the receiver location to control the source.

5.4 KVM Функционалдыгы

For KVM functionality, connect your USB keyboard and mouse to the designated USB ports on the receiver unit. This allows you to control the connected computer (source device) from the receiver location.

6. Техникалык тейлөө

  • Тазалоо: Түзмөктү тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Суюк же аэрозоль тазалагычтарды колдонбоңуз.
  • Сактагыч: Аппаратты түз күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
  • Вентиляция: Ашыкча ысып кетпеши үчүн, түзүлүштөрдүн айланасында жакшы желдетүүнү камсыз кылыңыз. Желдетүү тешиктерин жаппаңыз.
  • Колдонуу: Түзмөктөрдү этияттык менен кармаңыз. Аларды түшүрүп албоодон же катуу соккуга кабылбоодон алыс болуңуз.

7. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Дисплейде сигнал жок.
  • Туура эмес кабелдик туташуулар.
  • Бирдиктер күйгүзүлгөн эмес.
  • Pairing failed or lost.
  • Булак түзмөк сигнал чыгарбайт.
  • Аралык өтө алыс же тоскоолдуктар.
  • Check all HDMI and power cable connections.
  • TX жана RX түзмөктөрүнүн экөө тең күйүп турганын текшериңиз.
  • Repeat the initial pairing steps (Section 4.1).
  • Verify the source device is on and outputting an HDMI signal.
  • Reduce distance between TX and RX, remove obstructions, or reposition antennae.
Видеонун сапаты начар же бүлбүлдөп.
  • Алсыз зымсыз сигнал.
  • Башка 5G түзмөктөрүнөн келген тоскоолдуктар.
  • Кабелдер бошоп калган же бузулган.
  • Ensure TX and RX are within range and line of sight.
  • Minimize other 5G wireless devices nearby.
  • Check and secure all HDMI cables. Replace if damaged.
Инфракызыл алыстан башкаруу пульту иштебей жатат.
  • IR emitter not correctly positioned.
  • IR cable not fully connected.
  • Ensure the IR emitter is directly facing the IR sensor of the source device.
  • Check the IR IN cable connection to the receiver.

8. Техникалык шарттар

Модель номериR15 RX
БрендЛемореле
Продукциянын өлчөмдөрү3.58 x 3.5 x 1.25 дюйм
Элемент Салмагы1.38 фунт
Байланыш технологиясыHDMI, Wireless (5G)
Шайкеш түзмөктөрTelevision, Monitor, Projector, Cable box, Blu-ray Players, PS 5/4/3, Xbox, Computers, Laptop, etc.
Жалпы HDMI порттору3 (on TX: 1 IN, 1 OUT; on RX: 1 OUT)
Аудио чыгаруу режимиКурчап
Көлөмдүү үн каналынын конфигурациясы4.0
ТүсКара

9. Кепилдик жана колдоо

9.1 Продукциянын кепилдиги

Lemorele offers a one-year product warranty from the date of purchase. During this period, you may request an unconditional return or exchange for any manufacturing defects or performance issues. Please retain your proof of purchase for warranty claims.

9.2 Кардарларды колдоо

For any inquiries, technical assistance, or warranty claims, please contact Lemorele customer service. Our support team is available 24 hours online to assist you.

  • Онлайн колдоо: Visit the official Lemorele webсайтына кириңиз же сатып алуу платформаңыз аркылуу байланышыңыз.
  • Электрондук почта колдоо: Продуктуңуздун таңгагына же расмий өкүлгө кайрылыңыз webколдоо электрондук почта дареги үчүн сайт.

Note: For the most up-to-date contact information, please refer to the Lemorele official webсайты же продуктунун таңгагында берилген байланыш маалыматы.

© 2023 Lemorele. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.