KIMEX 015-1156 6-Monitor Desk Mount Instruction Manual

1. Киришүү

The KIMEX 015-1156 is a robust desk mount designed to support up to six PC monitors, ranging from 17 to 32 inches in size. This ergonomic solution helps optimize desk space and enhance your workspace efficiency. The mount is compatible with VESA standards 75x75mm and 100x100mm, accommodating monitors with a maximum weight of 7 kg each. It offers comprehensive adjustability, including height, tilt, swivel, and rotation, allowing for a fully customized and comfortable viewтажрыйбасы.

An integrated cable management system ensures a tidy and professional setup, keeping your cables organized and out of sight.

2. Коопсуздук маалыматы

Please read and understand all instructions thoroughly before assembly and use. Failure to follow these instructions may result in property damage, serious injury, or death.

• Чогултууну баштоодон мурун бардык компоненттердин бар экенин жана бузулбаганын текшериңиз. Эгерде кандайдыр бир тетиктер жок же бузук болсо, колдонбоңуз.
• Do not exceed the maximum weight capacity of 7 kg (15.4 lbs) per monitor or a total load of 60 kg (132 lbs) for the entire mount.
• Бул продукт ички колдонуу үчүн гана арналган.
• Монтаждоо нускамаларында көрсөтүлгөндөй ылайыктуу шаймандарды колдонуңуз.
• Балдарды жана үй жаныбарларын чогултуу аянтынан алыс кармаңыз. Чакан бөлүктөрү муунуп калуу коркунучу болушу мүмкүн.
• Ensure the desk surface is stable and capable of supporting the combined weight of the mount and all attached monitors.
• Мезгил-мезгили менен бардык бурамалар менен байланыштарды текшерип туруңуз, алар бекем жана бекем бойдон калууда.

3. Пакеттин мазмуну

Бардык тетиктер таңгагыңызга киргенин текшериңиз. Эгерде кандайдыр бир тетиктер жок болсо же бузулуп калса, кардарларды тейлөө кызматына кайрылыңыз.

• Негизги колдоо мамыча
• Heavy-Duty Desk Base
• Monitor Arms (2 sets, for 6 monitors)
• VESA Mounting Plates (6 units)
• Кабелди башкаруу клиптери/капкактары
• Assembly Hardware (screws, washers, spacers for VESA mounting)
• Required Tools (e.g., Allen keys)

1-сүрөт: Бүттүview of KIMEX 015-1156 monitor mount components. This image displays the various parts included in the package, such as the main pole, base, monitor arms, and VESA plates, before assembly.

4. Орнотуу нускамалары

Follow these steps carefully to assemble your KIMEX 015-1156 monitor desk mount.

Step 1: Assemble the Base and Main Pole

1. Place the heavy-duty desk base on a stable, flat surface.
2. Attach the main support pole to the base using the provided screws and tools. Ensure it is securely fastened.

2-сүрөт: The KIMEX 015-1156 monitor mount fully assembled, ready for monitor attachment. This image shows the main pole and arms securely connected to the base.

Step 2: Attach Monitor Arms to the Main Pole

3. Slide the monitor arm assemblies onto the main pole at your desired heights.
4. Secure each arm assembly in place using the locking mechanisms or screws provided. Ensure they are level and firmly attached.

3-кадам: VESA плиталарын мониторлорго бекитиңиз

5. Carefully place each monitor face down on a soft, clean surface.
6. Align a VESA mounting plate with the VESA holes on the back of each monitor (75x75mm or 100x100mm).
7. Secure the VESA plate to the monitor using the appropriate screws and washers from the hardware kit. Do not overtighten.

Step 4: Mount Monitors onto the Arms

8. With assistance if needed, carefully lift each monitor and slide its attached VESA plate onto the corresponding monitor arm bracket.
9. Ensure the monitor is securely seated and locked into place on the arm.

3-сүрөт: Арткы view of the KIMEX 015-1156 monitor mount with six monitors attached. This image highlights the VESA plate connections and the cable management system in use.

5-кадам: Кабель башкаруу

10. Route all monitor cables (power, video) through the integrated cable management clips or covers on the monitor arms and main pole.
11. Ensure cables have enough slack for full range of motion without being stretched or pinched.

5. Иштөө нускамалары

The KIMEX 015-1156 monitor mount offers various adjustment options for optimal viewсооронуч.

• Бийиктигин тууралоо: To adjust the height of the monitor arms, loosen the locking collar on the main pole, slide the arm assembly to the desired height, and then re-tighten the collar securely.
• Эңкейүүнү тууралоо: Each monitor can be tilted up or down by adjusting the tilt mechanism on the VESA plate. This typically involves loosening a knob or screw, setting the desired angle (up to ±15 degrees), and then re-tightening.
• Айланууну жөндөө: Monitors can be swiveled left or right (up to ±45 degrees for outer monitors, ±180 degrees for inner monitors) at the arm joint to achieve the perfect viewбурч.
• Айланууну тууралоо: Monitors can be rotated 360 degrees from landscape to portrait orientation without removing them from the mount. Loosen the rotation screw on the VESA plate, rotate the monitor, and re-tighten.

4-сүрөт: Dimensional drawing of the KIMEX 015-1156 monitor mount, illustrating key measurements and adjustment ranges for tilt (±15°), swivel (±45° for outer, ±180° for inner), and VESA compatibility.

6. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө мониторуңуздун узак мөөнөттүү иштешин жана коопсуз иштешин камсыз кылат.

• Тазалоо: Wipe the mount surfaces with a soft, slightly damp кездеме. Финишке зыян келтирүүчү абразивдүү тазалагычтардан же эриткичтерден качыңыз.
• Мезгилдүү текшерүүлөр: Every few months, inspect all screws, bolts, and connections to ensure they are still tight. Re-tighten any loose fasteners to maintain stability and safety.
• Майлоо: No lubrication is typically required for this type of mount. If any joints become stiff, consult customer support.

7. Кыйынчылыктарды

If you encounter any issues with your KIMEX 015-1156 monitor mount, refer to the following common problems and solutions:

• Мониторлор тегиз эмес:
  • Ensure the monitor arms are set at the same height on the main pole.
  • Adjust the individual VESA plate tilt and rotation mechanisms to fine-tune the monitor alignment.
• Тоо туруксуз же солкулдаган сезилет:
  • Verify that the main pole is securely attached to the desk base.
  • Check that all monitor arm connections and VESA plate screws are tightened.
  • Ensure the total weight of your monitors does not exceed the maximum load capacity.
  • Confirm that the desk surface itself is stable and not flexing under the weight.
• Cables are messy or getting caught:
  • Re-route cables through the integrated cable management system.
  • Ensure there is sufficient slack in the cables to allow for full monitor movement without tension.
• Монитордун абалын тууралоодогу кыйынчылыктар:
  • Loosen the relevant adjustment screws or knobs before attempting to reposition the monitor.
  • Ensure no cables are impeding movement.

If these solutions do not resolve your issue, please contact customer support for further assistance.

8. Техникалык шарттар

9. Кепилдик маалыматы

KIMEX products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your 015-1156 monitor mount, please refer to the warranty card included with your purchase or visit the official KIMEX webсайт. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.

10. Кардарларды колдоо кызматы

Should you require technical assistance, have questions regarding assembly, or need to report a missing/damaged part, please contact KIMEX customer support. You can typically find contact information on the official KIMEX webсайтында же сиз продуктуну сатып алган сатуучу аркылуу.

Колдоо кызматына кайрылганда, өнүмүңүздүн моделинин номерин (015-1156) жана сатып алууну тастыктаган документти даярдап коюңуз.