Introduction
The Thermaltake TOUGHFAN 12 Pro is a high static pressure PC cooling fan designed for optimal performance in various applications, including chassis, air cooling, liquid cooling, and demanding operations. This fan features an advanced blade design for enhanced airflow and static pressure, along with a second-generation hydraulic bearing for improved durability and stability.
Image: Thermaltake TOUGHFAN 12 Pro High Static Pressure PC Cooling Fan (2-Fan Pack).
Пакеттин мазмуну
Сиздин пакетте бардык компоненттер бар экенин текшериңиз:
- Thermaltake TOUGHFAN 12 Pro (2 units)
- Mounting Screws (for chassis and radiator installation)
- Low Noise Cable (L.N.C.) for reduced RPM operation
Орнотуу & Орнотуу
Follow these steps to properly install your TOUGHFAN 12 Pro:
- Системаңызды даярдаңыз: Ensure your computer is powered off and unplugged from the wall outlet. Open your PC case to access the fan mounting locations.
- Монтаждоо ордун аныктоо: Determine whether you are installing the fan as a case fan or on a radiator. The TOUGHFAN 12 Pro is suitable for both.
- Желдеткичти орнотуу: Align the fan with the screw holes on your chassis or radiator. Use the provided mounting screws to secure the fan firmly. Ensure the fan is oriented to provide the desired airflow direction (intake or exhaust).
- Connect the PWM cable: Plug the fan's 4-pin PWM connector into an available 4-pin fan header on your motherboard. If you wish to reduce the maximum fan speed and noise level, connect the included Low Noise Cable (L.N.C.) between the fan and the motherboard header.
- Кабелдик башкаруу: Route the fan cables neatly to avoid interference with other components and to maintain good airflow within your case.
- Жабуу жана күйгүзүү: Close your PC case, plug in the power cable, and power on your computer. Verify that the fan is spinning correctly.
Image: TOUGHFAN 12 Pro fans installed in a PC chassis.
Операция
The TOUGHFAN 12 Pro utilizes Pulse Width Modulation (PWM) control, allowing your motherboard to dynamically adjust the fan speed based on system temperature. This ensures efficient cooling when needed and quieter operation during lighter loads.
- Стандарттык операция: When connected directly to a 4-pin PWM header, the fan speed will automatically adjust between 500 and 2000 RPM.
- Low Noise Operation (L.N.C.): For users prioritizing silence, connect the included Low Noise Cable (L.N.C.). This cable limits the maximum fan speed to 1500 RPM, reducing overall noise output.
Техникалык тейлөө
Regular maintenance helps ensure optimal performance and longevity of your cooling fans.
- Тазалоо: Periodically clean dust from the fan blades and frame using compressed air or a soft, dry cloth. Ensure the fan is powered off and unplugged before cleaning.
- Текшерүү: Check for any obstructions around the fan blades or unusual wear on the cables.
- Подшипниктерге кам көрүү: The Gen.2 Hydraulic Bearing is designed for long-term, maintenance-free operation. No lubrication is required.
Проблемаларды чечүү
If you encounter issues with your TOUGHFAN 12 Pro, refer to the following common solutions:
- желдеткич айланбай жатат:
- 4-пиндүү PWM туташтыргычы энелик платанын желдеткич колонкасына бекем сайылганын текшериңиз.
- Check your motherboard's BIOS/UEFI settings to confirm the fan header is enabled and configured correctly.
- Test the fan on a different fan header or with a different power source if possible.
- Ашыкча ызы-чуу:
- Verify that the fan is securely mounted and not vibrating against the case or other components.
- Ensure no cables are touching the fan blades.
- If using the L.N.C., ensure it is properly connected.
- Adjust fan speed settings in your motherboard's software or BIOS/UEFI to a lower RPM.
- Начар муздатуу көрсөткүчтөрү:
- Check the fan's orientation to ensure it is pushing air in the desired direction (e.g., into the case for intake, out of the case for exhaust).
- Clean any dust buildup on the fan blades or radiator fins.
- Ensure there is adequate airflow within your PC case.
If problems persist, please contact Thermaltake customer support.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бөлүмдүн номери | CL-F159-PL12BL-A |
| Fan Dimension | 120 x 120 x 25 мм |
| Started Voltage | 6 V |
| Rated Voltage | 12 V |
| Номиналдуу ток | 0.19 А |
| Power Input | 2.28 Вт |
| Желдеткичтин ылдамдыгы (PWM) | 500~2000 R.P.M |
| Fan Speed (with L.N.C.) | 500~1500 R.P.M |
| Статикалык басым | 3.19 мм-Н2О |
| Static Pressure (with L.N.C.) | 1.72 мм-Н2О |
| Аба агымы | 70.8 CFM |
| Air Flow (with L.N.C.) | 49.13 CFM |
| Ызы-чуу деңгээли | 22.6 дБ-А |
| Noise Level (with L.N.C.) | 18.3 дБ-А |
| Подшипник түрү | Hydraulic Bearing Gen.2 |
| Life Expectation | 40,000 hrs, 25℃ |
| Туташтыргыч | 4 PIN PWM |
| Материал | Эритме болот |
Image: Detail of the fan's tight tip clearance for improved efficiency.
Кепилдик маалымат
The Thermaltake TOUGHFAN 12 Pro is backed by a 5 жылдык өндүрүүчү кепилдик. This warranty covers defects in materials and workmanship under normal use. For detailed terms and conditions, please refer to the official Thermaltake webсайтка же кардарларды колдоо менен байланышыңыз.
Image: Thermaltake TOUGHFAN Pro series with 5-year warranty badge.
Колдоо
For further assistance, technical support, or warranty claims, please visit the official Thermaltake webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз.
- Thermaltake расмий Webсайт: www.thermaltake.com
- Thermaltake Store on Amazon: Visit the Thermaltake Store