Instruction Manual for 21 mm Steel Bracelet

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your 21 mm Steel Bracelet, specifically designed for the Longines Master Collection Moonphase L2.673.4 watch. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.

Figure 1: The 21 mm Steel Bracelet, showcasing its polished links and integrated butterfly clasp.

Орнотуу жана орнотуу

Follow these steps to correctly attach the steel bracelet to your watch case. It is recommended to use appropriate watchmaking tools to avoid scratching the bracelet or watch.

1. Жумуш мейкиндигиңизди даярдаңыз: Ensure you have a clean, well-lit area. Place a soft cloth or mat on your work surface to protect the watch and bracelet from scratches.
2. Identify Spring Bars: Locate the spring bars on your watch case lugs and on the bracelet end links. These are small, spring-loaded pins that secure the bracelet.
3. Attach First End Link: Insert one end of a spring bar into the lug hole on one side of the watch case. Using a spring bar tool, compress the other end of the spring bar and guide it into the corresponding lug hole on the opposite side. Ensure it clicks securely into place.
4. Коопсуз тиркемени текшерүү: Gently pull on the bracelet to confirm it is firmly attached to the watch case and does not wobble.
5. Repeat for Second End Link: Attach the second end of the bracelet to the other set of watch lugs following the same procedure.
6. Узундугун тууралаңыз (зарыл болсо): If the bracelet is too long, links can be removed. This process typically requires specialized tools and is best performed by a qualified watchmaker to prevent damage.

Figure 2: The bracelet folded, illustrating the link construction and the points where pins connect the segments.

Operating the Clasp

The bracelet features a butterfly deployment clasp for secure and comfortable wear.

1. ачуу үчүн: Locate the two small push-buttons on the sides of the clasp. Press both buttons simultaneously to release the clasp and open the bracelet.
2. Жабуу: Bring the two ends of the bracelet together. Align the clasp components and press them firmly until you hear a distinct click, indicating that both sides of the clasp are securely engaged.

Техникалык тейлөө жана кам көрүү

Proper care will help maintain the appearance and functionality of your steel bracelet.

• үзгүлтүксүз тазалоо: Wipe the bracelet regularly with a soft, lint-free cloth to remove dirt, oils, and perspiration.
• Терең тазалоо: For a more thorough clean, use a mild soap solution and a soft brush (like a toothbrush) to gently scrub the links and clasp. Rinse thoroughly with clean water and dry immediately with a soft cloth. Ensure no moisture remains in the crevices.
• Катуу химиялык заттардан алыс болуңуз: Do not expose the bracelet to harsh chemicals, solvents, or abrasive cleaners, as these can damage the steel finish.
• Сактагыч: When not in use, store the bracelet in a clean, dry place, preferably in a soft pouch or watch box to prevent scratches.

Проблемаларды чечүү

If you encounter any issues with your bracelet, consider the following common solutions:

• Bracelet Feels Loose After Installation:

  Чечим: Ensure the spring bars are fully seated in the lug holes. Gently pull on the bracelet to confirm it is secure. If it remains loose, the spring bar may be bent or damaged and require replacement.

• Clasp Not Closing Securely:

  Чечим: Check for any debris or foreign objects lodged within the clasp mechanism. Clean the clasp thoroughly. If the issue persists, the clasp mechanism may be bent or worn and might require professional adjustment or replacement.
• Bracelet Links Are Stiff:

  Чечим: Dirt and grime can accumulate between links, causing stiffness. Perform a deep clean as described in the Maintenance section. If stiffness persists, lubrication with a tiny amount of watch oil (applied by a professional) might be necessary.

Техникалык шарттар

Кепилдик жана колдоо

Specific warranty details and direct customer support contact information are not provided within this manual. For any warranty claims or support inquiries, please refer to the original point of purchase or the product listing where this item was acquired.