Mount-It! MI-1765 Single Monitor Wall/Pole Mount Instruction Manual

Introduction

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Mount-It! MI-1765 Single Monitor Wall/Pole Mount. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed to support single monitors between 17 and 32 inches, with a maximum weight of 15.4 lbs, and is compatible with VESA 75x75 and 100x100 mounting patterns.

Коопсуздук маалыматы

ЭСКЕРТҮҮ: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.

• 15.4 lbs (7 кг) максималдуу салмак сыйымдуулугунан ашпаңыз.
• Ensure the mounting surface (wall or pole) can safely support the combined weight of the mount and the monitor.
• Use only the hardware provided. If any parts are missing or defective, contact Mount-It! customer support.
• Do not install into drywall alone. For wood stud mounting, ensure the mount is secured into the center of a solid wood stud. For concrete/brick mounting, use appropriate anchors.
• Always use a second person for assistance during installation, especially when lifting the monitor.
• Орнотуу учурунда балдарды жана үй жаныбарларын алыс кармаңыз.
• Check all connections regularly to ensure they remain secure.

Пакеттин мазмуну

Сураныч, орнотууну улантуудан мурун бардык компоненттер бар экенин жана бузулбаганын текшериңиз.

• Жазгы кол ассамблеясы
• Дубалга орнотуу базасы
• Pole Mounting Clamp (with alternative bolts for thicker poles)
• VESA плитасы
• Mounting Hardware (Lag Screws, Washers, Concrete Anchors, Bolts for Monitor)
• Hex ачкычтары
• Декоративдүү капкактар
• Bubble Level (may be integrated into tools)

Орнотуу & Орнотуу

1. Choose Mounting Option: Wall or Pole

The MI-1765 offers versatile mounting options for either a wall or an existing pole. Select the method that best suits your workspace.

Figure 1: Wall and Pole Mounting Options. The image displays two mounting methods: an adjustable pole mount base (fits poles 1.1" - 2.36" diameter) with +/-135° rotation, and a fixed wall mount base with +/-90° and +/-180° rotation options.

2. Дубалга орнотуу

2.1 Wood Stud Mounting

1. Using a stud finder, locate the center of a wood stud at your desired mounting height.
2. Hold the wall mount plate against the stud, ensuring it is centered. Use a bubble level to confirm straightness.
3. Mark the center of the mounting holes with a pencil.
4. Using a 3/16" (4.5mm) drill bit, drill pilot holes at the marked locations.
5. Secure the wall mount plate to the wall using the provided lag screws and washers. Tighten until secure.
6. Insert the decorative covers into each of the bolt holes.

2.2 Concrete / Brick Mounting

1. Hold the wall mount plate at the desired location on the concrete or brick wall. Use a bubble level to ensure straightness.
2. Mark the center of the mounting holes with a pencil.
3. Using a 3/8" (10mm) drill bit, drill holes at the marked locations to a depth of 2.4" (60mm).
4. Clear any dust and debris from the drilled holes.
5. Insert the provided concrete anchors into the holes.
6. Secure the wall mount plate to the wall using the provided lag screws and washers. Tighten until secure.
7. Insert the decorative covers into each of the bolt holes.

3. Pole Mounting Installation

This option is for mounting the arm to an existing pole with a diameter between 1.1" and 2.4".

1. Using the provided hex wrench, loosen the two bolts on the pole clamp cl чейинamp opens wide enough to slide onto your pole.
2. For thicker poles (1.8" - 2.4" diameter), remove the pre-installed bolts and replace them with the alternative longer bolts provided. Adjust the width of the clamp уюлдан бир аз чоңураак болуу.
3. Slide the pole clamp onto the pole at the desired height.
4. Tighten the bolts on the pole clamp коопсуз болгонго чейин.

4. Attaching the Spring Arm to the Mount

1. ЭСКЕРТҮҮ: The spring arm is under tension. It is recommended to have a second person assist with this step. Carefully cut the zip tie securing the spring arm.
2. Place the end of the spring arm onto the end of the wall mount or pole mount.
3. Tighten the bolt on the back of the spring arm to secure it to the base.

5. Мониторду орнотуу

1. Using the appropriate size bolts and washers for your monitor's VESA pattern (75x75mm or 100x100mm), install the top two bolts into the monitor's VESA holes. Leave a gap of approximately 0.1 inches (2.5mm) between the bolt head and the monitor surface.
2. Carefully hang the monitor onto the top of the VESA plate on the spring arm, aligning the top two bolts with the slots.
3. Install the lower two bolts and washers through the lower holes of the VESA plate into the monitor.
4. Tighten all four bolts until secure, ensuring not to overtighten.

Figure 2: Quick Installation Base. This image illustrates the quick and convenient assembly mechanism for attaching the monitor arm to its base.

Operating & Adjustments

The MI-1765 monitor arm features full motion adjustments for optimal viewing comfort and flexibility.

Figure 3: Full Motion Design. This diagram highlights the arm's extension range (3.5" - 21.8"), swivel capabilities (+/-180° and +/-90°), rotation (+/-180°), and maximum height adjustment (12.2").

• Бийиктигин тууралоо: The spring arm allows for effortless height adjustments. Gently push or pull the monitor to the desired vertical position.
• Эңкейүүнү тууралоо: To adjust the monitor's tilt angle, loosen the screw behind the VESA assembly. Position the monitor at the desired angle, then tighten the screw to secure it. The tilt range is up to 90 degrees.
• Айланууну жөндөө: The arm allows for 180° swivel, enabling you to share your screen easily or adjust your viewing angle. The VESA plate also offers +/-90° swivel.
• Айлануу: Rotate your monitor 360° to switch between landscape and portrait orientation.
• Кеңейтүү: The arm extends up to 21.8" (55.4 cm), allowing you to bring your screen closer or push it further away for optimal viewаралык.

Кабель башкаруу

Keep your workspace neat and organized by routing cables through the integrated cable management clips.

1. Open the cable management clips located on the underside of the spring arm.
2. Route your monitor's power and video cables through the clips.
3. Close the clips to secure the cables.

Figure 4: Cable Management. This image demonstrates how to use the integrated cable management clips to keep cables tidy and out of sight.

Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө мониторуңуздун узак мөөнөттүү иштешин жана коопсуз иштешин камсыз кылат.

• Бардык бурамаларды жана болттордун бекем жана коопсуз экенин текшерүү үчүн мезгил-мезгили менен текшерип туруңуз.
• Орноткучту жумшак, d менен тазалаңызamp кездеме. Абразивдүү тазалагычтардан же эриткичтерден качыңыз.
• Do not lubricate any moving parts unless specifically instructed by Mount-It! support.

Проблемаларды чечүү

Эгер кандайдыр бир көйгөйгө туш болсоңуз, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз:

Техникалык шарттар

Кепилдик жана колдоо

This Mount-It! monitor arm comes with a LIFETIME warranty. Our knowledgeable and responsive US-based customer support team is available to answer any questions you may have during standard business hours.

For assistance, please visit the Mount-It! website or contact our customer support directly.

Продукт бүттүview Video