REUMAR AH 9066 WiFi HaLow Wireless Bridge Instruction Manual

Introduction

The REUMAR AH 9066 WiFi HaLow Wireless Bridge is designed to extend the range of your wireless network. It functions as a relay for your existing wireless router, boosting the signal and transmitting it to areas with weaker coverage. This device is commonly used for extending network access to IP cameras and other remote devices.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• Extends wireless network range, acting as a relay for existing routers to boost signal in areas with weaker coverage, commonly used for IP cameras.
• Supports 2.4GHz frequency for reliable connections, featuring built-in antennas for enhanced signal strength and stability.
• Easy setup: Connect the USB power adapter and network cable to the router for automatic connection to your existing wireless network.
• Long-distance transmission with a built-in omni-directional antenna, offering a visual range of up to 1000 meters and wall penetration capability.
• Operates at 902-928MHz with an 8MHz bandwidth, supporting a maximum transmission rate of 16Mbps. Actual speed may vary due to interference, distance, and other wireless signals. Supports up to 8 connected devices.

Кутуда эмне бар

Upon unpacking your REUMAR AH 9066 WiFi HaLow Wireless Bridge, please ensure all items are present:

• 1 x Transmitter Unit
• 1 х кабыл алуучу бирдиги
• 2 x 2dBi жогорку күчөткүчтүү антенналар
• 2 x Тармактык кабелдер
• 2 х Power адаптерлери
• Installation Network Package (mounting hardware)
• User Manual

Орнотуу нускамалары

Follow these steps to set up your REUMAR AH 9066 Wireless Bridge for point-to-point connection:

1. Антенналарды тиркөө: Connect the provided antennas to the SMA interfaces on both the transmitter (TX) and receiver (RX) units. Ensure they are securely fastened.
2. Connect Transmitter to Network: Connect one end of a network cable to the network port socket of the transmitter unit. Connect the other end to your existing router's LAN port or directly to a device like an IP camera.
3. Күйгүзүлгөн өткөргүч: Plug the transmitter's power adapter into a power outlet and connect it to the transmitter unit. The power supply indicator will flash for 3 seconds and then remain on after a self-test.
4. Кабыл алгычты түзмөккө туташтырыңыз: Connect one end of the second network cable to the network port socket of the receiver unit. Connect the other end to the device you wish to provide network access to, such as a computer, NVR, or another router's WAN port.
5. Кубаттуу кабылдагыч: Plug the receiver's power adapter into a power outlet and connect it to the receiver unit. The power indicator and RX indicator will flash for 3 seconds and then remain on after a self-test.
6. Байланышты текшерүү: Once both units are powered on and indicators are stable, the wireless bridge should establish a connection automatically. For IP camera monitoring, open a PC browser and input the IP address of the camera to log in and view the video feed. For WiFi expansion, connect your mobile device to the router connected to the receiver.

Image: Step-by-step connection guide for the wireless bridge units.

Иштөө нускамалары

The REUMAR AH 9066 Wireless Bridge operates on a plug-and-play principle, requiring minimal configuration once set up. The units automatically establish a connection to extend your network.

• Point-to-Point Connection: The primary mode of operation involves a transmitter (TX) unit and a receiver (RX) unit creating a direct wireless link. This is ideal for extending network access to a single remote location or device.
• Point-to-Multi-Point Connection: While the core setup is point-to-point, the system can support multiple receiver units connecting to a single transmitter, allowing for network extension to several remote points.
• Тармакты кеңейтүү: When the receiver unit is connected to a WiFi router, it can provide expanded wireless coverage to multiple mobile devices, computers, and tablets within its range.
• Түзмөктүн шайкештиги: The bridge is compatible with various network-enabled devices such as computers, smart TVs, IP cameras, switches, game consoles, printers, laptops, and routers.

Image: Illustrates different ways to connect the wireless bridge for video monitoring and network expansion.

Image: Shows the versatility of the RX unit in connecting to various devices for network access.

Техникалык тейлөө

To ensure optimal performance and longevity of your REUMAR AH 9066 Wireless Bridge, consider the following maintenance guidelines:

• үзгүлтүксүз тазалоо: Keep the units free from dust and debris. Use a soft, dry cloth for cleaning. Avoid liquid cleaners.
• Курчап турган чөйрөнү коргоо: While designed for outdoor use, ensure the units are installed in locations that minimize direct exposure to extreme weather conditions where possible. Regularly check for any signs of wear or damage to the casing or cable connections.
• Кабелдин бүтүндүгү: Periodically inspect all connected cables (network and power) for any cuts, fraying, or loose connections. Replace damaged cables immediately.
• Программалык камсыздоонун жаңыртуулары: Өндүрүүчүнү текшериңиз webсайтына мезгил-мезгили менен кирип, жеткиликтүү болгон микропрограммалык камсыздоонун жаңыртууларын карап туруңуз. Микропрограммалык камсыздоону жаңыртып туруу иштин натыйжалуулугун жана коопсуздугун жакшыртат.
• Power Cycle: If you experience intermittent connectivity issues, try power cycling both the transmitter and receiver units by unplugging them from power for 10 seconds and then plugging them back in.

Проблемаларды чечүү

If you encounter issues with your REUMAR AH 9066 Wireless Bridge, refer to the following troubleshooting tips:

• No Power Indicator: Ensure the power adapter is securely connected to both the unit and a working power outlet. Try a different outlet or power adapter if available.
• No Link/RX Indicator: Verify that both the transmitter and receiver units are powered on and within range. Check that network cables are properly connected to both units and the connected devices (router, camera, computer). Ensure there are no significant obstructions between the units.
• Жай туташуу ылдамдыгы: The maximum transmission rate is 16Mbps. Actual speeds can be affected by interference, distance, and other wireless signals. Try repositioning the units to minimize interference and ensure a clear line of sight if possible. Reduce the number of connected devices if exceeding 8.
• Үзгүлтүктүү туташуу: Check for sources of interference (e.g., other wireless devices, large metal objects). Ensure the units are securely mounted and not subject to movement. Power cycle both units and connected network equipment.
• Cannot Access IP Camera/NVR: Confirm the IP address of the camera/NVR is correct. Ensure your computer is on the same network segment or properly configured to access the device through the bridge.

Техникалык шарттар

Кошумча продукт маалымат

Image: Demonstrates the point-to-point wireless connection capability between two locations.

Image: Visual representation of the long-distance wireless transmission equipment in an urban setting.

Image: Illustrates a wireless connection setup for an IP camera, emphasizing no messy cabling.

Image: Shows diverse applications of the wireless bridge in different environments.

Image: Highlights the waterproof design and weather resistance of the device.

Image: Demonstrates the through-the-wall penetration capability for multi-floor coverage.

Кепилдик жана колдоо

For warranty information and technical support, please refer to the documentation included with your product or visit the official REUMAR webсайт. Коргоо пландары кеңейтилген камтуу үчүн жеткиликтүү болушу мүмкүн.