EVTSCAN Soil Tester User Manual

Introduction

This manual provides detailed instructions for the proper use and maintenance of your EVTSCAN Soil Tester. Please read this manual thoroughly before operating the device to ensure accurate measurements and prolonged product life. This device is designed for measuring soil temperature, air temperature, air humidity, and illumination levels in various environments such as plants, gardens, lawns, and farms.

Продукт бүттүview

The EVTSCAN Soil Tester is a portable device designed for quick and accurate environmental measurements. It features a clear display, easy-to-use buttons, and a durable probe.

Сүрөт 1: Алдыңкы view of the EVTSCAN Soil Tester.

Негизги өзгөчөлүктөрү:

• Колдонууга оңой: Obtain test results quickly by inserting the probe into the soil.
• Так өлчөө: Designed for precise readings of environmental conditions.
• Маалыматтарды кулпулоо функциясы: A dedicated HOLD button allows for convenient data viewing.
• Портативдик дизайн: Compact and lightweight for easy transport and use in various locations.
• Ар тараптуу колдонмо: Suitable for family plants, gardens, lawns, and farms.

Жайгашуу

Батарея орнотуу:

1. Аппараттын артындагы батарея бөлүкчөсүн табыңыз.
2. Батарея уясынын капкагын ачыңыз.
3. Remove any packaging from the included 9V 6F22 dry battery.
4. Туура полярдуулукту камсыз кылуу менен 9V батарейканы салыңыз.
5. Батарея уясынын капкагын бекем жабыңыз.

2-сүрөт: Батарея отсегинин жайгашкан жери.

Note: The device will not power on until the battery is correctly installed and any protective film is removed from the battery terminals.

Иштөө нускамалары

Түзмөктү башкаруу:

Figure 3: Control buttons on the EVTSCAN Soil Tester.

• ON/OFF баскычы:
  • Short press to turn the device on.
  • Long press for 3 seconds to turn the device off.
  • Батареянын кубатын үнөмдөө үчүн түзмөк 15 мүнөт аракетсиз тургандан кийин автоматтык түрдө өчөт.
• ℃/℉ баскычы:
  • Press this button to switch the temperature unit between Celsius (℃) and Fahrenheit (℉).
• HOLD баскычы:
  • Press this button to lock the current readings on the display. This is useful for recording data.
  • Press again to release the data lock and resume live readings.

Өлчөөлөрдү алуу:

1. Turn on the device by short pressing the КҮЙГҮЗҮҮ/ӨЧҮРҮҮ баскычы.
2. Insert the metal probe into the soil to approximately 2/3 of its length (about 14-15 cm or 5.5-6 inches). Ensure the probe is fully inserted into the root zone for accurate soil readings.
3. Position the device to face the sun for accurate illumination readings.
4. Wait a few moments for the readings to stabilize on the display. The display will show soil temperature, air temperature, air humidity, and illumination.
5. Кааласаңыз, басыңыз БЕРҮҮ button to lock the displayed data for easier recording.
6. After use, gently remove the probe from the soil.

Figure 4: Probe length and recommended insertion depth.

5-сүрөт: Мисample of readings on the display.

Техникалык шарттар

Техникалык тейлөө

• Тазалоо: After each use, wipe the metal probe clean with a damp cloth to remove any soil residue. Do not immerse the main body of the device in water.
• Сактагыч: Store the soil tester in a dry, cool place away from direct sunlight and extreme temperatures.
• Батареяны алмаштыруу: If the display becomes dim or the device does not power on, replace the 9V battery. Ensure proper disposal of old batteries according to local regulations.
• Таасирден качуу: Handle the device with care to prevent damage to the probe or internal components.

Проблемаларды чечүү

Кепилдик жана колдоо

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EVTSCAN webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.