ciciglow M5 LCD Display User Manual

1. Продукт бүтүп калдыview

The ciciglow M5 LCD Display is designed to provide essential information for electric bikes and scooters. It is compatible with 24V, 36V, 48V, and 60V systems, offering a clear and stable interface for monitoring your ride.

Key features include a waterproof design for reliable performance in various weather conditions, and a robust construction ensuring a low failure rate for long-term use.

2. Коопсуздук маалыматы

• Электр коопсуздугу: Always ensure the power is off before connecting or disconnecting the display. Incorrect wiring can damage the device or your vehicle.
• Суу каршылык: The display features a waterproof design for use in rainy conditions. However, avoid submerging the device in water.
• Орнотуу: If you are unsure about the installation process, it is recommended to seek assistance from a qualified technician.
• Иштөө температурасы: Operate the display within recommended temperature ranges to ensure optimal performance and longevity.

3. Пакеттин мазмуну

Сураныч, пакетте төмөнкү нерселерди текшериңиз:

• 1 x ciciglow M5 LCD E-Bike Computer
• 1 х Колдонуучунун колдонмосу (бул документ)

4. Продукциянын өзгөчөлүктөрү

• Суу өткөрбөйт дизайн: Convenient and practical for use in rainy days without fear of getting wet.
• Туруктуу жана бышык: Wires and interfaces are designed to ensure a low failure rate for long-term use.
• Оңой орнотуу: Features optional mounting apertures of 31.8mm and 22.2mm, making it a suitable accessory for various electric bikes and scooters.
• Сапаттуу материал: Constructed from high-grade ABS material, ensuring sturdiness, wear resistance, and a long service life.

5. Техникалык шарттар

6. Орнотуу жана орнотуу

6.1 Дисплейди орнотуу

1. Select the appropriate mounting aperture (31.8mm or 22.2mm) for your handlebar.
2. Position the display on your handlebar in a location that provides clear visibility and easy access to the control buttons.
3. Securely fasten the display using the provided mounting hardware. Ensure it is tight enough to prevent rotation during use.

Figure 1: ciciglow M5 LCD Display installed on an electric bicycle handlebar.

6.2 Кабелдерди туташтыруу

1. Locate the 5-pin connector cable from the M5 LCD Display.
2. Connect this cable to the corresponding port on your electric bike or scooter controller. Ensure the connection is firm and secure.
3. Маанилүү: This display uses communication protocol 2. It must be paired with a controller that also supports communication protocol 2 for proper functionality. Incompatibility will prevent the display from working correctly.

Figure 2: M5 LCD Display and control unit, highlighting the wiring connections.

7. Иштөө нускамалары

7.1 Күйгүзүү/өчүрүү

To power on the display, press and hold the power button (typically the middle button on the control unit) for a few seconds. To power off, repeat the action.

7.2 Дисплейдеги көрсөткүчтөр

The M5 LCD Display provides the following information:

• Ылдамдыгы: Учурдагы жүрүү ылдамдыгы (км/саат).
• Энергия тилкеси: Калган батареянын деңгээлин көрсөтөт.
• Круиз: Shows the current cruise control setting or mode.
• Саякат: Displays the distance traveled for the current trip.

Сүрөт 3: Жакын пландан view of the M5 LCD Display showing various readouts and control buttons.

7.3 Баскыч функциялары

The control unit typically features three buttons (Up, Down, and Mode/Power). Specific functions may vary slightly based on the controller, but generally:

• Кубат / режим баскычы: Short press to cycle through display modes (e.g., Odometer, Trip Distance, Voltage). Long press to power on/off.
• Up/Plus Button: Short press to increase assistance level or navigate menus.
• Down/Minus Button: Short press to decrease assistance level or navigate menus.

8. Техникалык тейлөө

• Тазалоо: жумшак колдонуу, damp cloth to clean the display screen. Avoid using abrasive cleaners or solvents that could damage the screen or casing.
• Туташуу текшерүү: Бардык кабелдик туташуулардын бекем жана дат баспагандыгын же бузулбагандыгын текшерүү үчүн мезгил-мезгили менен текшерип туруңуз.
• Сактагыч: When not in use for extended periods, store the display in a dry, cool place away from direct sunlight.

9. Кыйынчылыктарды

• Дисплей күйбөйт:
  • Check if the battery of your electric bike/scooter is charged.
  • Ensure all cable connections, especially the 5-pin connector, are securely attached.
• Incorrect Readings (Speed, Trip):
  • Verify that the display is correctly configured for your wheel size (if applicable, check your controller's manual for settings).
  • Ensure any external speed sensors (if present) are properly installed and functioning.
• Display Not Compatible / No Functionality:
  • The ciciglow M5 LCD Display operates using communication protocol 2. It is essential that your electric bike or scooter controller also uses this specific protocol. If your controller uses a different protocol, the display will not be compatible and will not function. Please verify your controller's communication protocol.

10. Кепилдик жана колдоо

For warranty information or technical support, please refer to the purchase documentation or contact your retailer. If you have further questions or require assistance with your ciciglow M5 LCD Display, please reach out to the manufacturer's customer service.