ESKY 150 EC

ESKY 150 EC Micro RC Helicopter Instruction Manual

Model: 150 EC

Introduction

This manual provides essential instructions for the safe and effective operation of your ESKY 150 EC Micro RC Helicopter. The 150 EC is a third-generation micro remote-controlled helicopter designed for ease of operation. It features a 6-axis gyroscope for stable flight, atmospheric pressure and altitude hold capabilities, hovering, and a controllable flight path. It also includes a one-button shutdown function for emergency situations.

Кутуда эмне бар

Carefully unpack all components and ensure all items listed below are present. If any items are missing or damaged, please contact customer support.

  • 1 x ESKY 150 EC тик учагы
  • 1 x MINI 6X 6-Channel 2.4GHz Transmitter (Remote Control)
  • 1 x 1S 3.7V 150mAh 20C Li-Po Battery (for helicopter)
  • 2 x Негизги бычактар ​​(запастык)
  • 1 x куйрук бычагы (запастык)
  • 1 x USB заряддагыч
  • 2 x бурама
  • 1 х Колдонуучунун колдонмосу (бул документ)
Contents of the ESKY 150 EC Micro RC Helicopter package, including the helicopter, remote control, spare blades, battery, USB charger, and tools.

Image: All components included in the ESKY 150 EC package.

Продукт бүттүview

Вертолеттун компоненттери

Side view of the ESKY 150 EC Micro RC Helicopter, yellow with blue and white accents.

Сүрөт: каптал view of the ESKY 150 EC helicopter.

The ESKY 150 EC helicopter features a durable frame, main rotor blades, a tail rotor, landing skids, and a removable canopy. The main rotor provides lift and control, while the tail rotor controls yaw (left/right rotation).

Алыстан башкаруу (өткөргүч)

The MINI 6X 6-Channel 2.4GHz transmitter is used to control the helicopter. Familiarize yourself with its various controls:

Labeled diagram of the MINI 6X 6-Channel 2.4GHz Remote Control, showing Mode Switch, Power LED, Throttle Cut Switch, Rudder, Throttle, Aileron, Elevator, Trim controls, and Power Switch.

Image: Labeled diagram of the MINI 6X Remote Control.

  • Режим которуу: Changes flight modes (e.g., beginner/advanced).
  • Power LED көрсөткүчү: Күч абалын көрсөтөт.
  • дроссель кесүү которгучу: Immediately cuts power to the motor.
  • Rudder (Left/Right): Controls the helicopter's yaw.
  • Throttle (Up/Down): Негизги ротордун ылдамдыгын жана бийиктигин башкарат.
  • Aileron (Left/Right): Controls the helicopter's roll (side-to-side movement).
  • Elevator (Up/Down): Controls the helicopter's pitch (forward/backward movement).
  • Trim Controls (Throttle, Rudder, Aileron, Elevator): Fine-tune controls to correct unwanted drift.
  • Кубат которгучу: Turns the remote control ON/OFF (hold down for ON/OFF).

Жайгашуу

1. Тик учактын батареясын кубаттоо

The helicopter uses a 1S 3.7V 150mAh Li-Po battery. Always use the provided USB charger.

  1. USB кубаттагычты USB кубат булагына туташтырыңыз (мисалы, компьютердин USB порту, USB дубал адаптери).
  2. Connect the helicopter battery to the USB charger. Ensure the polarity is correct.
  3. Кубаттоочу түзүлүштөгү индикатор кубаттоо абалын көрсөтөт (белгилүү бир жарык үлгүлөрү үчүн кубаттоочу түзүлүштүн көрсөтмөлөрүн караңыз).
  4. Once charging is complete, disconnect the battery from the charger. Do not overcharge.
Two USB chargers with Li-Po batteries connected, illustrating the charging process.

Image: Connecting the Li-Po battery to the USB charger.

2. Тик учактын батареясын орнотуу

Ensure the helicopter is powered off before installing the battery.

  1. Gently remove the helicopter's canopy to access the battery compartment.
  2. Insert the charged Li-Po battery into the compartment.
  3. Connect the battery plug to the helicopter's power port.
  4. Carefully reattach the canopy.
Helicopter with its canopy removed, showing the internal battery compartment.

Image: Helicopter with canopy removed, revealing the battery compartment.

Helicopter with the Li-Po battery correctly inserted into its compartment.

Image: Battery inserted into the helicopter.

3. Powering On and Binding

The helicopter and remote control must be bound (paired) before flight.

  1. Тик учакты тегиз, түз жерге коюңуз.
  2. Ensure the remote control's throttle stick is in the lowest position.
  3. Turn on the helicopter's power switch. The helicopter's indicator light will flash.
  4. Press and hold the Power Switch on the remote control until it turns on. The remote control's indicator light will flash.
  5. Wait for a few seconds. The indicator lights on both the helicopter and remote control should become solid, indicating a successful binding.
  6. If binding fails, turn off both devices and repeat the process.

Иштөө нускамалары

Always operate the helicopter in an open, safe area, away from people, animals, and obstacles. Ensure you have sufficient space for flight.

Негизги учуу башкаруу

  • Дроссель (Сол таякча өйдө/ылдый): Increases or decreases the main rotor speed, controlling ascent and descent.
  • Руль (Сол таякча сол/оң): Controls the helicopter's rotation around its vertical axis (yaw).
  • Лифт (Оң жактагы өйдө/ылдый): Алдыга жана артка кыймылды (тонду) башкарат.
  • Эйлерон (Оңго таякча солго/оңго): Капталдан капталга кыймылды (тоголонууну) башкарат.

Учуу жана конуу

  1. Учуп чыгуу: Slowly push the throttle stick up. The helicopter will gain altitude. Maintain a steady throttle to achieve a stable hover.
  2. Конуу: Slowly pull the throttle stick down. The helicopter will descend. Reduce throttle completely upon landing.

Altitude Hold and Hover

The 150 EC is equipped with a 6-axis gyroscope and atmospheric pressure sensor for stable flight and altitude hold. Once the helicopter reaches a desired altitude, release the throttle stick to its center position. The helicopter will attempt to maintain its current height.

Flight Modes (Hi/Lo)

The remote control features a Mode Switch. It is recommended to use the "Hi" mode for more stable and responsive flight. The "Lo" mode may exhibit a slight delay in controller response.

One-Button Shutdown

In an emergency or if the helicopter is out of control, use the Throttle Cut Switch to immediately stop the motors. This function can also be used for a quick, controlled shutdown after landing.

Техникалык тейлөө

Тазалоо

Wipe the helicopter and remote control with a soft, dry cloth after each use. Avoid using water or chemical cleaners, as they can damage electronic components.

Бычакты алмаштыруу

If main or tail blades become damaged, replace them with the provided spares using the included screwdriver. Ensure blades are securely fastened but not overtightened.

Four circular close-up images showing details of the helicopter: battery compartment, main rotor attachment, tail rotor, and canopy removal.

Сүрөт: деталдуу views of helicopter components, including rotor attachment points.

Батареяга кам көрүү

  • Ар дайым оригиналдуу заряддагычты колдонуңуз.
  • Батареяны ашыкча заряддабаңыз же ашыкча зарядсыздандырбаңыз.
  • Батареяларды салкын, кургак жерде, күндүн нуру жана ысык тийбеген жерде сактаңыз.
  • If the battery swells or shows signs of damage, discontinue use immediately and dispose of it properly.

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Helicopter does not respond to remote control.Not bound, low battery (helicopter or remote), power off.Ensure both devices are powered on. Re-bind the helicopter and remote control. Charge helicopter battery. Replace remote control batteries.
Тик учак абада калкып турганда кыймылдайт.Uneven trim settings, slight wind, unbalanced blades.Adjust trim controls on the remote control. Operate in a calm environment. Check blades for damage and replace if necessary.
Helicopter does not take off.Low helicopter battery, damaged blades, throttle not advanced enough.Charge helicopter battery. Check and replace damaged blades. Slowly increase throttle.
Кыска учуу убактысы.Батарея толук заряддалган эмес, эскирип калган.Ensure battery is fully charged. Consider replacing the battery if it's old or damaged.

Техникалык шарттар

  • Модель номери: 150 EC
  • Өндүрүүчү: ESKY
  • Башкаруу системасы: 6 огу гироскоп
  • Өзгөчөлүктөрү: Height Hold, Hover, One-button Shutdown
  • Тик учактын батареясы: 1S 3.7V 150mAh Li-Po (included)
  • Алыстан башкаруу: MINI 6X 6-Channel 2.4GHz Transmitter
  • Сунушталган жаш: 14 жаш жана андан жогору
  • Элемент Салмагы: Болжол менен 1.05 фунт (таңгактоо менен)
  • Пакеттин өлчөмдөрү: 8.3 x 7.1 x 3.8 дюйм
Diagram showing the dimensions of the ESKY 150 EC helicopter: 186mm length, 44mm width, 59mm height.

Image: ESKY 150 EC Helicopter dimensions.

Коопсуздук эрежелери

Please read and adhere to these safety guidelines to prevent injury or damage.

  • Always operate the helicopter in an open area, away from people, pets, and obstacles.
  • Do not fly near power lines, roads, or water bodies.
  • Keep fingers and loose clothing away from rotating blades.
  • Never fly in strong winds or adverse weather conditions.
  • Adult supervision is recommended for users under the age of 14.
  • Do not attempt to modify the helicopter or its components.
  • Turn off the helicopter and remote control when not in use.

Кепилдик жана колдоо

Information regarding product warranty and customer support contact details is not available in the provided product data. Please refer to the product packaging or the seller's webкепилдиктин белгилүү бир шарттары жана колдоо параметрлери үчүн сайтты караңыз.

Расмий продукт Videos

Продукциянын маалыматтарында сатуучунун расмий видеолору берилген эмес.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.