Universal Audio GPS-1176

Universal Audio 1176 Studio Compressor Pedal User Manual

Model: GPS-1176

1. Киришүү

Welcome to the Universal Audio 1176 Studio Compressor Pedal user manual. This document provides essential information for setting up, operating, and maintaining your new compressor pedal. The 1176 Studio Compressor brings the legendary punchy and expressive tones of the classic 1176 Limiting Amplifier to a compact stompbox format, built on the powerful UAFX engine. It offers switchable true/buffered bypass and a parallel compression mode, making it a versatile addition to any pedalboard.

2. Продукт бүтүп калдыview

Familiarize yourself with the various components and controls of your 1176 Studio Compressor pedal.

Front Panel

Universal Audio 1176 Studio Compressor pedal, front view, showing Input, Output, Attack, Release, and Ratio knobs, a toggle switch for Single/Dual/Sustain modes, and a footswitch.

The front panel features the primary controls for shaping your compression sound. From top to bottom, you will find the Input and Output level knobs, a toggle switch for selecting compression modes (Single, Dual, Sustain), and three lower knobs for Attack, Release, and Ratio. A bright LED indicates the pedal's status, and the large footswitch activates or bypasses the effect.

Арткы панель

Арткы view of the Universal Audio 1176 Studio Compressor pedal, showing the input and output jacks, 9V DC power input, and toggle switches for Bypass (Buffer/True) and Parallel (Off/On).

The rear panel houses the audio input and output jacks, the 9V DC power input, and two important configuration switches: the Bypass switch (Buffer/True) and the Parallel switch (Off/On).

Каптал панели

Side view of the Universal Audio 1176 Studio Compressor pedal, showing a USB-C port.

One side of the pedal features a USB-C port, used for firmware updates and registration.

3. Орнотуу

Follow these steps to set up your 1176 Studio Compressor pedal for the first time.

  1. Кубат туташуу: Connect a standard 9V DC power supply (center-negative, 250mA minimum) to the 9V DC input jack on the rear panel. Ensure the power supply meets these specifications to prevent damage.
  2. Аудио киргизүү: Аспапыңызды (мисалы, гитара) туташтырыңыз IN арткы панелдеги уячаны стандарттуу 1/4 дюймдук аспап кабели менен туташтырыңыз.
  3. Аудио чыгаруу: туташтыруу OUT jack on the rear panel to your ampкөтөргүчтү, аудио интерфейсти же стандарттуу 1/4 дюймдук аспап кабелин колдонуп, сигнал чынжырыңыздагы кийинки педалды колдонуңуз.
  4. Bypass Mode Selection: On the rear panel, set the BYPASS кайсынысына болбосун өтүү ЧЫН (for true bypass, which completely removes the pedal from the signal path when off) or БУФЕР (for buffered bypass, which maintains signal integrity over long cable runs).
  5. Parallel Mode Selection: On the rear panel, set the PARALLEL өтүү ӨЧҮРҮҮ or ON. When ON, the pedal will blend a dry signal with the compressed signal.

4. Иштөө нускамалары

Understand the functions of each control to effectively use your 1176 Studio Compressor.

Controls

  • КИРҮҮ: Controls the input level of your signal into the compressor. Higher settings will result in more compression.
  • ЧЫГЫШ: Controls the overall output volume of the pedal. Use this to match levels with your bypassed signal or other pedals.
  • ЧАБУУЛ: Determines how quickly the compressor reacts to incoming signals. Slower attack times allow initial transients to pass through, while faster times compress them immediately.
  • ЧЫГАРЫЛУУ: Determines how quickly the compressor returns to its uncompressed state after the signal drops below the threshold. Shorter release times can create a pumping effect, while longer times provide smoother sustain.
  • КАТЫШТЫГЫ: Sets the compression ratio, determining how much the signal is compressed once it exceeds the threshold. Higher ratios result in more aggressive compression. The

    Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.