Richmat HJA58 кыймылдаткычынын колдонуу боюнча колдонмосу

Introduction

This manual provides essential information for the installation, operation, and maintenance of the Richmat HJA58 Actuator. This actuator is designed as a replacement component for adjustable beds and hospital beds, specifically for the foot or head section. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Коопсуздук маалыматы

• Always disconnect power to the adjustable bed before attempting any installation, removal, or maintenance of the actuator.
• Ensure the replacement actuator model is HJA58 to guarantee compatibility and proper function.
• Do not attempt to open or repair the actuator. Internal components are not user-serviceable. Opening the unit may void any implied warranty and poses electrical hazards.
• Keep hands, hair, and loose clothing clear of moving parts during operation.
• If the actuator appears damaged, do not install or use it. Contact the supplier for assistance.
• This device is intended for indoor use only. Avoid exposure to moisture or extreme temperatures.

Пакеттин мазмуну

Таңгакты ачканда бардык компоненттердин бар экенин жана бузулбаганын текшериңиз.

• 1 x Richmat HJA58 Actuator (Pump)

Орнотуу жана орнотуу

Follow these steps carefully to replace your existing actuator. It is recommended to have a second person assist with lifting and positioning the bed frame if necessary.

1. Төшөктү даярдоо: Disconnect the adjustable bed from its power source. Ensure the bed is in a stable position, preferably flat or slightly elevated to access the actuator.
2. Identify the Actuator: Locate the existing actuator on your adjustable bed. Confirm it is the HJA58 model by checking its label.
   

   Сүрөт: Жакын план view of the Richmat HJA58 actuator's identification label, displaying critical specifications such as item number HJA58, rated voltage DC 24V, max load 6000N, and duty cycle.
3. Disconnect Old Actuator: Carefully disconnect the power cable and any mounting pins or bolts securing the old actuator to the bed frame. Note the orientation and connection points for reinstallation.
   

   Image: The Richmat HJA58 actuator, showing the main body, extending rod, and the attached power cable with its connector, ready for installation or removal.

4. Эски кыймылдаткычты алып салуу: Once disconnected, carefully remove the old actuator from the bed frame.
5. Жаңы кыймылдаткычты орнотуу: Position the new Richmat HJA58 actuator in the same location and orientation as the old one. Secure it using the existing mounting pins or bolts. Ensure all connections are firm and stable.
   

   Image: The Richmat HJA58 actuator, a linear motor designed for adjustable beds, shown in its compact form with the extending rod partially retracted.

6. Туташуу кубаты: Reconnect the actuator's power cable to the bed's control box or power supply. Ensure the connection is secure.
7. Сыноо функциясы: Reconnect the adjustable bed to its main power source. Carefully test the bed's functions (e.g., foot or head elevation) to ensure the new actuator operates smoothly and correctly.

Иштөө нускамалары

The Richmat HJA58 Actuator operates in conjunction with your adjustable bed's existing control system (remote control or integrated panel). Once properly installed and connected, the actuator will respond to commands from the bed's control unit to raise or lower the specific section of the bed it is attached to.

• Ensure the bed is connected to a stable power supply.
• Use the bed's remote control or panel to activate the desired movement (e.g., foot up/down).
• Do not exceed the maximum load capacity of the bed or actuator (Max. Load: push 6000N).
• Observe the duty cycle (Max. 2min ON/18min OFF) to prevent overheating and prolong the actuator's lifespan. Avoid continuous operation for extended periods.

Техникалык тейлөө

The Richmat HJA58 Actuator requires minimal maintenance.

• Тазалоо: Wipe the exterior of the actuator with a dry cloth to remove dust and debris. Do not use liquid cleaners or abrasive materials.
• Текшерүү: Periodically inspect the actuator and its connections for any signs of wear, damage, or loose fittings. Ensure the power cable is not pinched or frayed.
• Майлоо: The actuator is factory-lubricated and does not require additional lubrication.

Проблемаларды чечүү

If you encounter issues with your Richmat HJA58 Actuator, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact the seller or manufacturer for further assistance. Do not attempt to disassemble the actuator.

Техникалык шарттар

Кепилдик жана колдоо

Specific warranty details for this product may vary depending on the point of purchase. Please refer to your purchase documentation or contact the seller directly for warranty information.

For technical support, questions regarding installation, or troubleshooting assistance, please reach out to the seller or manufacturer. When contacting support, please provide your product model (HJA58) and a detailed description of the issue.

Байланыш: Refer to your purchase receipt or the product listing for seller contact information.